Package Contents
Parts are not to scale:
| Part | Description | Quantity |
|---|---|---|
| A | The fixture with wire | 1 |
| B | Metal shade | 1 |
| C | Wrench | 1 |
Light Source
Requires one 230V E27 bulb, 40W Max (not included). An LED bulb is recommended.
Care and Cleaning
Exterior Maintenance
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Caution
Only use bulbs as directed on the label on the lamp. Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch the lamp when the lamp is lit, as it can be hot.
(Original warnings in Norwegian and Swedish are merged into the English version above.)
Pre-Installation
Planning the Installation
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required
- Knife
Installation
Step-by-Step Guide
Follow these steps to assemble your floor lamp:
Step 1: Base Assembly and Pole Connection
- Assemble the base and connect the first pole section.
- Connect subsequent pole sections (2, 3, 4) to extend the lamp's height.
- Ensure all connections are secure.
- The base assembly includes wiring connections (indicated by 5, 6).
Step 2: Attaching Lamp Head, Shade, and Bulb
- Attach the lamp head assembly to the top of the pole.
- Install the recommended bulb (230V E27 40W Max).
- Attach the metal shade (Part B) to the lamp head.
Operation
To operate the lamp:
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
