Nova Life Gaston Interior Floor Lamp
Instructions Manual
Package Contents
Parts are not to scale.
The package contains:
| Part | Description | Quantity |
|---|---|---|
| A | The fixture with wire | 1 |
| B | LED driver plug | 1 |
Diagram Description: The 'Package contents' diagram shows two main components: Part A, labeled 'The fixture with wire', and Part B, labeled 'LED driver plug'. These are illustrated as separate parts before assembly. An illustration of the assembled Interior Floor Lamp for Gaston shows its upright structure with a base, a slender pole, and two distinct light heads.
Light Source
Main Light: LED 18W, 1697lm, 3000K
Side Light: LED 5W, 484lm, 3000K
(LED driver plug warranty: 3 years)
Dimmer
Features a dimmer function integrated into the lamp.
Care and Cleaning
Exterior Maintenance
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth. Use clean water, never a solvent, to wipe the surface.
- Do not use any cleaners containing chemicals, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Pre-Installation
Planning the Installation
Read all instructions before assembly and installation. Before starting installation of the fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Tools Required: Knife
Installation
Diagram Description: The 'Installation' section provides a visual guide in three steps. Step 1 shows the lamp base and the lower pole section being connected, with numbered connection points. Step 2 illustrates the assembly of the upper pole sections and the attachment of the two light heads, with directional indicators showing how they connect. Step 3 shows the completed lamp assembly. The 'Installation (continued)' section further details the assembly. Step 1 shows the 'Main Light' and 'Side Light' components being attached to the top of the pole, with numbered connection points. Step 2 illustrates the connection of the LED driver plug (labeled '2') to the lamp's wiring, with numbered connection points.
Operation
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
