Baby Trend Nursery Center Playard

Product Information

• Model Number: PY81958
• Brand: Baby Trend
• Product Type: Playard / Nursery Center

Safety Warnings

⚠️ WARNING: Failure to follow these warnings and instructions could result in serious injury or death.

General Safety

• Always provide necessary supervision. Never leave child unattended.
• The playard, including side rails, must be fully erected and latches secure before use.
• Never use if parts are loose, missing, broken, or fabric is torn. Contact Baby Trend Customer Service at 1-800-328-7363 for assistance.
• Never leave child in the product with sides lowered. Ensure sides are raised and locked.
• This product is not intended for commercial use.

Suffocation Hazards

• NEVER leave infant in product with sides down. Infant may roll into space between pad and loose mesh side.
• Infants can suffocate in gaps between a mattress/pad and product sides, or on soft bedding.
• Never add extra mattresses, pillows, comforters, or padding. Use only the provided mattress.
• Never use a water mattress.
• Never use plastic shipping bags or film as mattress covers; they can cause suffocation.
• Child can become entrapped and die if improvised netting or covers are placed on top of the play yard.

Fall Hazards

• Discontinue use when child begins to push up on hands and knees, reaches 25 inches (635 mm), weighs 15 lbs (6.8 kg), or is 4 months old, whichever comes first.
• When child can pull to standing, remove bumper pads, large toys, and other objects that could serve as steps.

Strangulation Hazards

• Strings can cause strangulation. NEVER place items with strings around a child's neck (e.g., hood strings, pacifier cords).
• NEVER suspend strings over the playard or attach strings to toys.
• NEVER place product near a window where blind or drape cords can strangle a child.

SIDS Recommendation

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless advised otherwise by a physician.

Accessory Specific Warnings (Bassinet/Changing Table)

• Discontinue use of the bassinet or changing table when child begins to push up on hands and knees, reaches 25 inches (635 mm), weighs 15 lbs (6.8 kg), or is 4 months old.
• NEVER leave the changing table in place when the child is in the bassinet or playard. Always flip it down when not in use.
• Always use the safety belt when child is on the changing table and stay within arm's reach.
• To prevent overheating, NEVER use an outdoor canopy with the bassinet.

Assembly Instructions

Playard Assembly

Before Assembly: Inspect product for damaged hardware, loose joints, missing parts, or sharp edges. Adult assembly is required.

Step 1: Unpack and Prepare

Unzip the carry bag and remove the playard frame. Undo fastening straps and set the mattress aside. Do not push down on the center of the playard floor yet.

Step 2: Erect Top Rails

Pull up each top rail one at a time. Ensure both tubes latch securely into place, making each rail rigid. The center of the playard must be raised while locking the rails. If one rail locks but the other does not, unlock the first rail by squeezing the center release and try again.

Step 3: Lock Center Mechanism

Once all four top rails are locked, push down on the center handle. The center mechanism will rotate 90 degrees clockwise and lock. Test each top rail by pushing down slightly to confirm it is rigid and secure.

Step 4: Place Mattress

Place the mattress on the playard floor with the padded side facing up.

Step 5: Secure Mattress

Insert the Velcro straps from the mattress underside through the floor slots. Fasten the straps to prevent the mattress from moving. Ensure the center handle remains raised while locking side rails.

Step 6: Engage Brakes

To operate the brakes on the wheels, press downward on the brake levers. Lift the lever upward to release.

Folding the Playard

Release the Velcro straps holding the mattress. Do not unlock top rails yet. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather legs and wheels towards the center.

Step 8: Unlock Rails for Folding

Locate the rail latch release in the center and bottom of each rail. Squeeze the lever with two hands until the rail releases the tubes, then push down. If rails do not release completely, lift the center of the floor higher.

Step 9: Wrap Mattress

Gather the four corners and center tightly. Wrap the mattress around the playard frame with the padded side inward. Secure straps.

Step 10: Store in Carry Bag

Place the folded playard into the carry bag, ensuring the handle protrudes from the zipper opening.

Bassinet Assembly

Note: Playard must be fully assembled before installing the bassinet. Remove the playard mattress.

Step 11: Position Bassinet

Position the bassinet over and into the assembled playard. Secure by pushing down firmly on each plastic support clip until snapped into place.

Step 12: Insert Support Tubes

Line up the mattress support tubes with the holes in the front frame assembly. Insert the tubes into the loops on the bassinet bottom.

Step 13: Place Bassinet Mattress

Place the mattress into the bassinet with the padded side facing upward.

To Remove Bassinet:

Remove the mattress. Unsnap all clips and lift the bassinet.

Changing Table Assembly

Note: Playard must be fully assembled before installing the changing table.

Step 14: Assemble Frame

Connect the two long curved bars. Insert them into the changing table fabric and slide them around. Connect the two short bars to each end of the long curved bars, ensuring knobs face down and in the same direction.

Step 15: Attach Changing Table to Playard

Insert connector knob prongs into playard corner holes. Turn knobs counter-clockwise to lock. Flip the changing table onto the playard and snap the buttons on the flap down. Ensure it is securely installed.

Step 16 & 17: Secure and Position Changing Table

Locate Velcro straps on the changing table underside and playard side rails. Flip the changing table into its upper position. Secure it to the playard frame using the Velcro straps.

Changing Table Restraint System

Place child on the table, ensuring hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the buckle. Tighten snugly but do not overtighten. To remove, unsnap the buckle.

To Remove Changing Table:

Flip the changing table to the outside of the playard. Unsnap the fabric flap. Twist connector knobs clockwise to unlock. Remove the changing table, disconnect bars, and remove the curved bar.

Parent Organizer Assembly

Position hooks on the organizer and press firmly into the slot. Connect the organizer/diaper stacker to the playard by sliding the connecting clips over an open portion of the top rail. Ensure clips attach easily without interference.

Mobile Assembly

The mobile is for visual stimulation only and should not be grasped by the child. Remove when the baby begins to push up. Always attach fasteners tightly.

Step 22: Assemble Lower Mobile Arm

Insert the mobile lower arm into the mobile arm holder until locked.

Step 23: Assemble Upper Mobile Arm

Insert the mobile upper curved arm into the lower arm assembly until locked.

Step 24: Attach Wind Up Unit

Attach the wind-up unit to the tri-shaped arm, aligning slots and pressing together.

Step 25: Connect Mobile Components

Snap the wind-up unit with the tri-shaped arm onto the upper curved arm. Connect each toy to the mobile by threading the string into the arm's slot.

Step 26: Attach Mobile to Playard

Insert the bottom of the mobile arm into the playard frame.

Maintenance and Cleaning

• Use only mild soap and warm water.
• DO NOT USE BLEACH.
• DO NOT MACHINE WASH.

Contact Information

For any difficulties with using this product, please contact Baby Trend Customer Service:

Phone: 1-800-328-7363 (8:00 AM - 4:30 PM PST, Monday - Friday)

Website: www.babytrend.com

Address: Baby Trend, Inc., 1607 S. Campus Ave., Ontario, CA 91761

Please have your model number (PY81958) and manufacturing date available when calling.

? STOP ALTO ARRÊT ?