PLATSA Assembly Instructions

Important Safety Information

WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Parts List

The following parts are included in the package:

8x Dowel pins (part 151705)
8x Screws (part 151706)
4x Long screws (part 108736)
4x Connectors/dowels (part 152059)
4x Small fasteners (part 146113)
2x Round caps/covers (part 10005905)
2x Circular covers/discs (part 126916)
2x Feet (part 150689)
2x Foot assembly bracket (part 150688)
2x Wall attachment bracket (part 10090922)

Note: Wall mounting screws and plugs are not included and must be purchased separately, suitable for your wall type.

Assembly Instructions

Step 1: Connect Side Panels

Align and connect the two side panels. The diagram shows a connector being inserted into one panel and then the other panel being attached. A close-up shows a hand engaging a locking mechanism to secure the connection.

Step 2: Attach Front Panel

Attach the front panel to the assembled side panels. The diagram shows the front panel being slotted into place between the side panels.

Step 3: Secure Front Panel

Engage the locking mechanism on the side panels to secure the front panel. A close-up shows a hand pressing a locking element.

Step 4: Insert Back Panel

Slide the back panel into the grooves provided on the side and front panels. A close-up shows a hand pushing the panel down into place.

Step 5: Attach Base

Attach the base panel to the bottom of the assembled frame. This step uses 8 screws (part 151706) and 8 dowel pins (part 151705).

Step 6: Attach Foot Assembly Brackets

Attach the two foot assembly brackets (part 150688) to the underside of the base panel. The diagram shows these brackets being inserted and secured.

Step 7: Attach Feet

Screw the two feet (part 150689) into the attached foot assembly brackets.

Step 8: Secure Top Panel

Place the top panel onto the assembled unit. A close-up shows a locking mechanism being engaged from the inside of the unit to secure the top panel.

Step 9: Install Shelf Supports

Insert the adjustable shelf supports into the desired pre-drilled holes on the inside of the unit. Arrows indicate vertical adjustment options.

Step 10: Attach Rear Covers

Attach the rear covers. The diagram shows two types of circular covers/discs (part 126916) and round caps/covers (part 10005905) being pressed into place on the rear of the unit, with an audible 'Click!' indicating secure attachment.

Step 14: Join Two Units (Optional)

To join two PLATSA units side-by-side, align them. Attach the wall attachment brackets (part 10090922) to the sides of the units using small fasteners (part 146113). The diagram shows the bracket being inserted and secured with screws.

Step 15: Stack Units (Optional)

To create a taller configuration, one PLATSA unit can be stacked on top of another. The maximum stacking height is 300 cm (118 7/64"). The connection is secured using dowels (part 152059) and long screws (part 108736).

Crucial Wall Mounting Reminder

IMPORTANT: To prevent serious or fatal injuries from furniture tip-over, this PLATSA unit MUST be secured to the wall using appropriate wall attachment devices. The diagram shows a unit being secured to a wall with a bracket. Ensure you use screws and plugs suitable for your wall type. Seek professional advice if unsure.

	PLATSA Storage Cabinet Assembly Instructions - IKEA Comprehensive assembly guide for the IKEA PLATSA storage cabinet. Includes detailed steps, parts list, and crucial safety information regarding wall attachment to prevent tip-over accidents.
	PLATSA Storage System Assembly Instructions \| IKEA Detailed assembly instructions for the IKEA PLATSA storage system. Learn how to safely build and secure your PLATSA furniture with step-by-step guidance and part identification.
	IKEA PLATSA Assembly Instructions and Safety Guide Detailed assembly instructions and safety warnings for the IKEA PLATSA furniture system. Learn how to safely build and secure your PLATSA unit to the wall.
	PLATSA Storage Unit Assembly Instructions \| IKEA Comprehensive assembly guide for the IKEA PLATSA storage system. This document provides detailed, step-by-step instructions, including crucial safety warnings about furniture tip-over prevention and wall mounting. Learn how to assemble various configurations of the PLATSA units.
	PLATSA Storage Cabinet Assembly Instructions \| IKEA Official assembly instructions for the IKEA PLATSA storage cabinet. Learn how to safely build and mount your PLATSA unit with step-by-step guidance and essential safety warnings.
	IKEA PLATSA Furniture System Assembly Instructions and Safety Guide Comprehensive guide to assembling the IKEA PLATSA furniture system, including essential safety warnings for preventing tip-over accidents and step-by-step instructions for secure wall mounting.
	PLATSA Furniture Assembly Instructions and Safety Guide A comprehensive guide for assembling IKEA PLATSA furniture, detailing parts, step-by-step instructions, and crucial safety information regarding wall anchoring to prevent tip-over accidents.
	PLATSA Modular Storage System - IKEA Assembly Instructions Official assembly instructions for the IKEA PLATSA modular storage system. Learn how to safely build, assemble, and wall-mount your PLATSA units with detailed steps and part identification.