PLATSA Storage Cabinet
Important Safety Information
⚠️ WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Note: Screw(s) and plug(s) for the wall are NOT included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice.
Read and follow each step of the instruction carefully.
Parts List
| Part Number | Quantity | Description |
|---|---|---|
| 151705 | 8x | Wall plug/anchor (example) |
| 151706 | 8x | Screw (example) |
| 108736 | 4x | Bolt/Screw |
| 152059 | 4x | Connector/Fitting |
| 146113 | 4x | Bracket/Mounting plate |
| 10005905 | 2x | Cap/Cover |
| 126916 | 2x | Hinge plate/Connector |
| 150689 | 2x | Foot/Leg |
| 150688 | 2x | Base support/Foot assembly |
| 10090922 | 2x | Wall attachment bracket |
Note: Part numbers are for reference; actual appearance may vary. Wall mounting hardware (screws/plugs) are not included.
Assembly Instructions
Step 1: Prepare Side Panels
Take two side panels. Insert the provided connectors into the pre-drilled holes on one edge of each panel. Ensure they are fully seated. A diagram shows hands inserting these connectors, with a close-up indicating the correct orientation and a crossed-out image showing incorrect insertion.
Step 2: Attach Bottom Panel
Take the bottom panel. Align it with the bottom edge of one side panel and connect them by pushing the bottom panel onto the connectors.
Step 3: Attach Second Side Panel
Attach the second side panel to the other side of the bottom panel, aligning the connectors and pushing them together to form a U-shape.
Step 4: Secure Back Panel
Slide the back panel into the grooves on the rear edges of the side and bottom panels. Ensure it is fully seated. A diagram shows hands guiding the back panel into place.
Step 5: Secure Unit to Wall
Use 8x screws (Part 151706) and 8x wall plugs (Part 151705) to secure the unit to the wall. The diagram shows the unit being positioned against a wall and screws/plugs being inserted through designated holes. Note: Wall screws and plugs are not included and must be suitable for your wall type.
[Diagram: Unit positioned against a wall, with close-ups showing screws and plugs being inserted into the wall.]
Step 6: Attach Base Supports/Feet
Attach the base support components (Part 150688) to the underside of the cabinet using the provided connectors (Part 152059). A diagram shows two base supports being attached, with a close-up of the connection mechanism.
[Diagram: Underside of the cabinet with base supports being attached.]
Step 7: Attach Adjustable Feet
Screw the adjustable feet (Part 150689) into the base supports. A diagram shows the feet being screwed into the base supports, with a close-up of the attachment.
[Diagram: Cabinet with feet being attached.]
Step 8: Wall Attachment Detail
Secure the cabinet to the wall using the provided wall attachment brackets (Part 10090922). Diagrams show the bracket being attached to the cabinet and then to the wall. This step emphasizes the importance of secure wall mounting.
[Diagram: Close-up of wall bracket attachment to cabinet and wall.]
Step 9: Shelf/Height Adjustment Indication
Indicates that the internal shelves or height can be adjusted. Double-headed arrows show vertical adjustment possibilities within the cabinet structure.
[Diagram: Cabinet with vertical arrows indicating adjustment.]
Step 10: Attach Hinge Plates
Attach the hinge mounting plates (Part 126916) to the inside of the cabinet frame using screws (Part 10005905). A diagram shows the plates being attached, with a close-up indicating the 'Click!' sound when properly seated.
[Diagram: Cabinet interior with hinge plates being attached. Close-up shows plate and screw, with a 'Click!' indicator.]
Step 11: Connect Cabinet Units (Side-by-Side)
If connecting two units side-by-side, use the provided connecting brackets (Part 10090922) and screws (Part 146113). Diagrams show how to align and secure the brackets between two cabinet units.
[Diagram: Two cabinets being joined together with brackets.]
Step 12: Stacking Cabinets
To stack cabinets, place the top cabinet onto the bottom cabinet. A maximum stacking height of 300 cm (118 7/64") is indicated. Ensure the top unit is stable before proceeding.
[Diagram: One cabinet being placed on top of another. A height indicator shows "Max. 300 cm".]
Step 13: Secure Stacked Cabinets
Secure stacked cabinets together using the provided connectors and screws. Diagrams show the connection points and the hardware used (e.g., Part 152059 and 108736).
[Diagram: Close-up of stacked cabinets being secured together.]
Step 14: Final Wall Attachment for Stacked Units
Ensure the stacked and connected units are securely fastened to the wall using appropriate wall attachment hardware. Diagrams show the connection points and the use of brackets and screws.
[Diagram: Stacked cabinets being secured to the wall.]
Step 15: Final Check and Optional Accessories
Final check of all connections. The diagram shows a person holding a level tool and a manual titled "LÄTTHET", suggesting optional accessories or further assembly steps might be available.
[Diagram: Person checking assembly with a level tool, holding a manual.]
Illustrative Guide
The document includes illustrative diagrams to aid assembly:
- A figure pointing to essential tools: a spirit level and a screwdriver.
- A figure assembling furniture components, showing correct alignment.
- A figure with a question mark (❓) contemplating furniture parts, indicating potential confusion or a need for clarification.
- A figure on the phone, with an IKEA store visible in the background, suggesting contacting customer support if needed.
Document Number: AA-2011634-11. © Inter IKEA Systems B.V. 2017.
