PLATSA

Safety First

⚠️ WARNING! Furniture tip-over can cause serious or fatal crushing injuries. To prevent tip-over, this furniture must be secured to the wall with the provided tip-over restraint(s).

Wall mounting screws and wall plugs are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

(Original warnings also provided in Spanish, Catalan, Basque, and Galician.)

Assembly Instructions

Step 1: Preparation and Tools

Gather necessary tools: a level, screwdriver, and screws. Assemble on a soft surface like a rug to prevent scratching.

Step 2: Handling Parts

Handle parts with care. [Assemble on a soft surface]. [❌ Do not force parts].

Step 3: Seeking Assistance

If you are unsure about assembly or identifying parts, seek help. [Seek assistance if unsure].

Parts List:

• 8x 151705 (Dowels)
• 8x 151706 (Screws)
• 4x 108736 (Cam Lock Screws)
• 4x 152059 (Cam Locks)
• 4x 146113 (Bracket Screws)
• 2x 150689 (Feet)
• 2x 150688 (Foot Assemblies)
• 2x 10090922 (Brackets)
• 2x 10005905 (Cover Caps)
• 2x 126916 (Cover Caps)

Step 1 (continued): Panel Assembly

Insert dowels and screws into the side panels. Ensure correct orientation. Connect the side panels to the base panel.

Step 2 (continued): Securing Connections

Insert cam locks into the designated holes and turn to secure the connection. [➡️ Insert cam lock and turn].

Step 3 (continued): Back Panel Installation

Slide the back panel into the grooves.

Step 4: Wall Mounting Preparation

Secure the unit to the wall using the provided hardware. [8x 151706 Screws, 8x 151705 Wall Plugs]. Ensure the unit is level before final tightening.

Step 5: Attaching Feet

Attach the feet to the base of the unit. [2x 150688 Foot Assemblies]. [ⓘ Information: Refer to LÄTTHET instructions for additional details on securing components or related accessories.]

Step 6: Attaching Foot Assemblies

Attach the foot assemblies to the base of the unit. [2x 150689 Feet].

Step 7: Wall Bracket Attachment

Attach the wall mounting brackets to the unit. [2x 10090922 Brackets]. Ensure they are securely fastened.

Step 8: Securing to Wall

Align the unit with the wall and secure the brackets to the wall using appropriate screws (not included). [2x Wall mounting hardware required]. [ⓘ Information: Refer to LÄTTHET instructions for additional details on wall mounting.]

Step 9: Height Adjustment

Adjust the unit's height if necessary. [↕️ Adjust height]. [ⓘ Information: Refer to LÄTTHET instructions for further guidance on adjustments or configurations.]

Step 10: Final Securing

Attach the locking mechanism to the top of the unit. [2x 126916 Cover Caps, 2x 10005905 Screws]. Ensure a secure 'click' when fastening.

Step 11: Connecting Units / Internal Components

Connect units side-by-side or attach internal components. Use the provided brackets [2x 10090922 Brackets] and screws [2x 146113 Bracket Screws]. Align components with the pre-drilled holes as indicated.

Step 12: Stacking Units

Stack units if desired. Maximum stacking height is 300 cm (118 7/64"). Secure stacked units using the provided hardware. [4x 108736 Cam Lock Screws, 4x 152059 Cam Locks]. [ⓘ Information: Refer to LÄTTHET instructions for stacking guidance and maximum load capacities.]