INSTRUCTION MANUAL
2 Gang Wi-Fi Dimmer Switch Module MS-105B
Global international operation Whenever & Wherever You are, All-in-one Mobile App
Features: Schedule timer, Voice control with Google Home, Voice control with Amazon Alexa, Device Sharing Anywhere, APP control, In-house local operation.
INSTALLATION
▲ Warnings:
- Installation must be carried out by a qualified electrician in accordance with local regulations.
- Keep the device out of the reach of children.
- Keep the device away from water, damp or hot environment.
- Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted in abnormal operation of the device.
- Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
- Do NOT attempt to disassemble, repair or modify the device.
WIRING DIAGRAM
A diagram shows the wiring connections for the dimmer switch module. It indicates connections for Live (L), Neutral (N), and two switched live outputs for lights (Light 1, Light 2). A reset switch is also shown.
TECHNICAL SPECIFICATIONS
| Product type | 2 Gang WiFi Dimmer Switch Module |
| Voltage | 90-250V AC |
| Max Power | 2*100W |
| WiFi frequency | 2.4GHz WiFi |
| Operation temp. | -10°C - +40°C |
| Case temp. | Tc: +80°C (Max.) |
| Operation range | < 200 m |
| Dims (WxDxH) | 52x47x18 mm |
| IP rating | IP20 |
| Warranty | 1 years |
EMC Standard (EMC): EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 55015:2013 +A1:2015, EN 61547:2009
Safety Standard (LVD): IEC 60669-2-1:2002/AMD1:2008/ AMD2:2015, IEC 60669-1:1998/ AMD1:1999/AMD2:2006, EN 60669-2-1:2004+A1:2009+A2:2010, EN 60669-1:2018
RoHS Standard (RoHS): 2011/65/EU, (EU) 2015/683
Wiring Instructions and Diagrams
- Turn off the power supply before carrying out any electrical installation work.
- Connect wires according to the wiring diagram.
- Insert the module into the junction box.
- Connect the power supply and follow switch module configuration instructions.
Notes: Put your smartphone close to the switch module when you're configuring, and make sure you have min. 50% Wi-Fi signal.
FAQ
- Q1: What should I do if I can't configure the switch module?
- a. Please check whether device is powered on.
b. Make sure your mobile and switch module are under the same 2.4 GHz WiFi network.
c. Whether it's in good internet conditions.
d. Make sure the password entered in App is correct.
e. Make sure the wiring is correct. - Q2: What device can be connected to this WiFi switch module?
- Most of your household electrical appliances can be, such as lamps, laundry machine, coffe maker, etc.
- Q3: What happens if the WiFi goes off?
- You can still control the device connected the switch module with your traditional switch and once WiFi is active again the device connected to module will connect automatically to your WiFi network.
- Q4: What should I do if I change the WiFi network or change the password?
- You have to re-connect our WiFi switch module to the new WiFi network according to the App User Manual.
- Q5: How do I reset the device?
- Power on/off device 10 times until the beeper on the module sounds continuously.
MANUAL OVERRIDE
The switch module terminal reserves the access of manual override function for the end-user to switch on/off.
- Switch on/off for permanent on/off function.
Notes:
- Both the adjustment on App and switch can be reset, the last adjustment remains in memory.
- The App control is synchronized with the manual switch.
APP USER MANUAL
iOS App / Android App
Scan the QR code to download Smart Life App, or you can also search keyword "Smart Life" at App Store or Googleplay to download App.
Step 1: Register/Login
Log in or register your account with your mobile number or e-mail address. Type in the verification code sent to your mobile or mail box, then set your login password. Click "Create Family" to enter into the App.
Step 2: Add Device
Note: This smart switch module can only be used with reset switch.
After the wiring of switch module is done, press the reset switch for 10 times (keep time interval not too short) until the beep sounds continuously and rapidly as Di-Di-Di... for pairing mode.
Open the App, select "+" on top right and choose "Switch (Wi-Fi)" to add device.
Confirm indicator blinks rapidly
Make sure your smart phone and WiFi switch module are under the same WiFi network at 2.4GHz connection. Confirm when the light blinks rapidly (twice a second).
Step 3: Connecting
The connecting will take about 10-120 seconds to complete depending on your network condition.
Step 4: Device Added Successfully
When pairing is done, the Dimmer will be shown on the App, and you are able to change the device name to your own taste.
Step 5: Control and Share
Connect to Amazon Alexa or Google Assistant for voice control, or share the devices with your families or friends.
Step 6: Enjoy Smart Life
Enjoy your smart life of home automation for lighting control by using our All-in-one mobile App wherever you are in the world or simply by voice control when you are sitting at home comfortably.
