Assembly Steps
- Attach the threaded tube (F) to the joint connector nut inside the lampshade (B) using the nut to secure.
- Attach the rounded glass sheet (G) to the threaded tube (F) using the silicone spacer (H), iron spacer (J), and the nut (K) to secure.
- Attach the decorative cover (L) to the threaded tube (F) using the nut (M) to secure.
- Install the mounting plate (N) on the outlet box with the screws (O).
- Loosen the hex nuts around the bolts (P) and screw in or unscrew the bolts from the junction box to get the right length for installation.
- Connect the fixture wire to the circuit wire by wire nuts (Q): black wire with live wire, white wire with neutral wire, ground wire with ground wire.
- Fix the lamp body (R) to the mounting plate (N) by the ball nuts (S).
- Screw the bulb(s) (T) into the lamp holder(s).
Please consult a qualified Electrician if you are not familiar with electrical wiring.
Diagram Description
The diagram illustrates the installation process for the light fixture. It shows an "Outlet Box" mounted on a ceiling or wall. From the outlet box, wires emerge: a "Ground Wire", a "Live Wire", and a "Neutral Wire". The fixture's internal wiring includes a "Black Wire" and a "White Wire", along with a ground wire. These wires are connected using wire nuts (Q). The main body of the fixture (R) is attached to a "Mounting Plate (N)" which is secured to the outlet box with screws (O). The assembly involves a threaded tube (F) passing through various components: the lampshade (B), a glass sheet (G), a silicone spacer (H), an iron spacer (J), and secured by nuts (K, M). A decorative cover (L) is also part of this assembly. Bolts (P) and ball nuts (S) are used for securing the fixture body to the mounting plate. A light bulb (T) is shown screwed into a lamp holder within the fixture.
Labeled components include:
- F: Threaded Tube
- G: Tempered Glass
- H: Silicone Spacer
- J: Iron Spacer
- K: Nut
- L: Decorative Cover
- M: Nut
- N: Mounting Plate
- O: Screws
- P: Bolts
- Q: Wire Nuts
- R: Lamp Body
- S: Ball Nuts
- T: Bulb
- B: Lampshade (mentioned in step 1)
