[JLab Audio Logo]
JLab JBuds Air ANC: Your Guide to True Wireless Audio
We love that you rock JLab Audio! We are proud of our products and stand behind them completely.
Warranty and Support
YOUR WARRANTY
All warranty claims are subject to approval by JLab Audio at its discretion. Keep your proof of purchase to ensure warranty coverage. [Limited Two Year Warranty] [U.S. Based Customer Support]
CONTACT US
Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact
REGISTER TODAY
intl.jlabaudio.com/register
Product updates | Useful tips | Frequently asked questions and more
EARPHONES JBUDS AIR ANC
FIRST-TIME SETUP
-
AUTO-CONNECT EARPHONES
Press and hold both buttons for more than 3 seconds to turn ON. One earphone will blink blue/white, indicating you are ready to pair with your device. [Press and hold for >3 seconds]
-
CONNECT TO BLUETOOTH
Select «JLab JBuds Air ANC» in your device's settings. You will hear two beeps followed by a solid white light to indicate you are connected.
[Settings Icon] Bluetooth
JLab JBuds Air ANC
ADD NEW / MORE BLUETOOTH DEVICES:
Turn OFF Bluetooth on all previously connected devices. Turn ON Bluetooth on the new device. The earbuds will automatically enter Bluetooth pairing mode. Select «JLab JBuds Air ANC» in the new device's settings to connect.
BUTTON FUNCTIONS
LEFT EARPHONE
- VOLUME DOWN: Single tap
- SIRI (iOS) or «OK GOOGLE» (ANDROID): Double tap
- AMBIENT AWARENESS / ANC ON / ANC OFF: Press and hold for more than 1 sec.
- TURN ON: Press and hold for more than 3 sec.
- CHANGE EQ: Triple tap
RIGHT EARPHONE
- VOLUME UP: Single tap
- ANSWER CALL: Single tap
- END CALL: Double tap
- REJECT INCOMING CALL: Press and hold for more than 1 sec.
- PLAY / PAUSE: Double tap
- NEXT TRACK: Press and hold for more than 1 sec.
- TURN ON: Press and hold for more than 3 sec.
- CHANGE EQ: Triple tap
MUSIC / MOVIE MODE:
Press and hold both touch sensors simultaneously for more than 3 seconds.
TURN OFF WITHOUT CHARGING CASE:
Turn off Bluetooth in your device's settings. The earbuds will now turn off after 3 minutes.
AUDIO MESSAGES
- ON: Chime sound
- BLUETOOTH CONNECTED: 2 Beeps
- LOW BATTERY: «Low Battery» (less than 20%)
- OFF: Chime sound
CUSTOM EQ3 SOUND MODES
Tap either the right or left earphone three times for different EQ settings (JBuds Air ANC will cycle through 3 EQ settings).
[EQ Mode Icon 1]
JLab SIGNATURE
JLab C3™ signature sound with enhanced vocals and bass
[EQ Mode Icon 2]
BALANCED
Even sound without additional audio enhancements
[EQ Mode Icon 3]
BASS BOOST
Enhanced bass and sub-bass
CHARGE THE EARPHONES
-
Ensure the L and R letters on the charging case match the earbuds for correct charging. The earbuds will automatically turn off and begin charging. Blue lights indicate the earbuds are charging and will turn OFF when the earbuds are fully charged. [Left Indicator] [Right Indicator]
-
The earbuds will automatically turn ON and reconnect to your device when removed from the case.
CHARGING CASE
Connect JBuds Air ANC to a computer or a device with a USB port at 5V 1A (or less). LEDs will pulse white while charging and stay solid white when fully charged. [Computer USB Port Diagram] [Wall Charger Diagram]
FIT
Cush Fin™ Ear Tip
Try all optional Cush Fins and ear tips to find the best fit and proper seal. The Cush Fin should be adjusted by placing the contour around the microphone port. [Diagram showing Cush Fin and Ear Tip placement]
TROUBLESHOOTING
NO SOUND IN ONE EARPHONE OR EARPHONES ARE DISCONNECTED (MANUAL RESET)
- Open your Bluetooth device settings and 'Forget' JBuds Air ANC.
- Open the charging case and place the earbuds inside.
- On ONE earphone, quickly tap the touch sensor 7 times. The light will blink blue 3 times and then turn off. [Tap 7 times diagram]
- Repeat the same steps with the other earphone. Quickly tap the touch sensor 7 times. The light will blink blue 3 times and then turn off. [Tap 7 times diagram]
- Wait 10 seconds and open the charging case. Wait for one of the earbuds to blink blue/white. You are now ready to connect to your Bluetooth device.
Instructional videos at: INTL.JLABAUDIO.COM/MANUALS
ECHO DURING CALLS
If you experience microphone echo / poor call quality with JBuds Air ANC, ensure the Cush Fin is not blocking the microphone port. [Diagram: Microphone covered with X symbol] [Diagram: Microphone open with checkmark symbol]
QUICK TIPS
- Each earphone can connect to your device and be used independently. Simply take the earphone out of the charging case and it will connect automatically.
- Choosing the correct ear tip provides a significant improvement in sound quality due to proper driver seal. Try all ear tips for best results.
WARNING
Dry the earbuds completely before placing them in the charging case to avoid damaging the case. The earbuds are sweat/water resistant, but the case is not.
CAUTION
- Avoid extreme heat, cold, and humidity.
- Avoid dropping or crushing the earbuds.
- Wax can build up in the ear tips, which can degrade sound quality. Gently remove wax with a Q-tip or other small tool to improve sound quality.
- If you experience discomfort or pain, try lowering the volume or discontinuing use of the product for a period.
- If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
- We recommend treating your earbuds like expensive sunglasses, storing them in a safe place when not in use.
Buy products | Product alerts | Burn-in your headphones
JLab Audio + Burn-in Tool
[Download on the App Store] [Get it on Google Play]
INTL.JLABAUDIO.COM
