Secop Mounting Accessories – Types of Packaging
Mounting Accessories – Types of Packaging
| Mounting | Code | Bolt/pin dimension | Comp. base hole | Type of packaging | Compressors | Parts list |
|---|---|---|---|---|---|---|
| Bolt joint | 118-1917 | M6 metric | 16 mm | Single pack for one compressor | P-/T-/D-/KL-/N-/F-/ S-Series K-Series / NLV/SLV/ BD Micro / BD-P/BD-T | I |
| Bolt joint | 118-1918 | M6 metric | 16 mm | Industrial pack in any quantity | P-/T-/D-/KL-/N-/F-/ S-Series K-Series / NLV/SLV/ BD Micro / BD-P/BD-T | I |
| Bolt joint | 118-1958 | M6 metric | 16 mm | Single pack for one compressor | SLVE | II |
| Bolt joint | 118-1961 | M6 metric | 16 mm | Industrial pack in any quantity | SLVE | II |
| Bolt joint | 107B9150 | M8 metric | 19 mm | Single pack for one compressor | G-Series | III |
| Bolt joint | 118-1946 | 1/4 inch | 16 mm | Single pack for one compressor | P-/T-/D-/KL-/N-/F-/ S-Series / NLV/SLV all with 19 mm base holes (except G-Series) | IV |
| Bolt joint | 118-1949 | 1/4 inch | 19 mm | Single pack for one compressor | V | |
| Snap-on | 118-1947 | Ø 7.3 mm | 16 mm | Single pack for one compressor | P-/T-/D-/KL-/N-/F-/ S-Series NLV/SLV/BD Micro / BD-P/BD-T | VI |
| Snap-on | 118-1919 | Ø 7.3 mm | 16 mm | Industrial pack in any quantity | P-/T-/D-/KL-/N-/F-/ S-Series NLV/SLV/BD Micro / BD-P/BD-T | VI |
| Snap-on | 118-1962 | Ø 7.3 mm | 16 mm | Industrial pack in any quantity | SLVE | VII |
| Bolt joint | 118-1960 | 11 mm | Single pack for one compressor | BD Nano | VIII |
Parts list (4 pcs. per compressor needed)
| Item | Part number | Diagram | |
|---|---|---|---|
| I | Sleeve Ø 8 mm x 6.4 mm x 0.8 mm | 112-2052 | Washer Nut Sleeve Compressor base Bolt Rubber grommet |
| Washer Ø 20 mm x Ø 6.7 mm x 1 mm | 112-2053 | ||
| Bolt M6 x 25 mm | 681X1130 | ||
| Nut M6 | 118-3659 | ||
| Rubber grommet 16 mm | 118-3661 | ||
| II | Sleeve Ø 8 mm x 6.4 mm x 0.8 mm | 112-2052 | Cabinet base Bolt Rubber grommet P-/T-/D-/K-/KL-/N-/F-/S-/G-Series NLV/SLV/SLVE / BD Micro / BD-P/BD-T Bolt joint mounting |
| Washer Ø 20 mm x Ø 6.7 mm x 1 mm | 112-2053 | ||
| Bolt M6 x 25 mm | 681X1130 | ||
| Nut M6 | 118-3659 | ||
| Rubber grommet 16 mm | 118-3670 | ||
| III | Sleeve Ø 11 mm x 8.6 mm x 1.2 mm | 107B9152 | Washer Clip Steel pin Compressor base Bolt Cabinet base Rubber grommet |
| Washer Ø 20 mm x Ø 8.8 mm x 1.2 mm | 107B9155 | ||
| Bolt M8 x 40 mm | 107B9153 | ||
| Nut M8 | 107B9154 | ||
| Rubber grommet 19 mm | 107B9151 | ||
| IV | Sleeve Ø 8.3 mm x 6.7 mm x 0.8 mm | 112-2088 | Snap-on mounting |
| Washer Ø 20 mm x Ø 6.7 mm x 1 mm | 112-2053 | ||
| Bolt 1/4 x 1 inch, 20 UNC | 119-3002 | ||
| Nut 1/4 inch, 20 UNC | 119-3031 | ||
| Rubber grommet 16 mm | 118-3661 | ||
| V | Sleeve Ø 9.5 mm x 7.9 mm x 0,8 mm | 112-2085 | Steel pin Washer Bolt Clip Rubber grommet P-/T-/D-/KL-/N-/F-/S-Series NLV/SLV/SLVE / BD Micro / BD-P/BD-T Snap-on mounting |
| Washer Ø 20 mm x Ø 6.7 mm x 1 mm | 112-2053 | ||
| Bolt 1/4 x 1 1/4 inch, 20 UNC | 119-3002 | ||
| Nut 1/4 inch, 20 UNC | 119-3031 | ||
| Rubber grommet 19 mm | 118-3666 | ||
| VI | Steel pin | 118-3586 | Bolt Clip Rubber grommet BD Nano Bolt joint mounting |
| Washer Ø 21 x Ø 8.1 mm x 0.9 mm | 118-3588 | ||
| Clip | 118-3585 | ||
| Rubber grommet 16 mm | 118-3661 | ||
| VII | Steel pin | 118-3586 | Washer Clip Rubber grommet |
| Washer Ø 21 x Ø 8.1 mm x 0.9 mm | 118-3588 | ||
| Clip | 118-3585 | ||
| Rubber Grommet 16 mm | 118-3670 | ||
| VIII | Bolt, length of thread: M5 x 8.5 mm | 118-3672 | |
| Washer Ø 15 mm x Ø 5.3 mm x 1.4 mm | 118-3591 | ||
| Rubber grommet 10 mm | 118-3671 |
