Secop NLV10CN Compressor Technical Data and Instructions
Product Overview
This document provides comprehensive technical data and operating instructions for Secop NLV10CN compressors and their associated controllers. It covers various configurations, specifications, performance characteristics, and application notes.
Single Pack Imballi (Single Pack Packaging)
Single Pack NLV10CN 100-240V 50/60Hz PM
Codice Imballo Singolo (Single Pack Code): 195B4604
| Posizione (Position) | Titolo (Title) | Codice (Code) | Quantità (Quantity) |
|---|---|---|---|
| 1 | Compressor NLV10CN | 105H7003 | 1 |
| 2 | Electronic unit NLV | 105N4761 | 1 |
| 3 | Cover | 103N2008 | 1 |
| 4 | Bolt joint for one compressor | M6 | ø16mm | 118-1917 | 1 |
Technical Data - Compressor
Model: NLV10CN
Compressor Design:
- Oil type: Polyolester
- Oil viscosity: 32cST
- Oil quantity: 298cm³ / 10.1fl.oz
- Refrigerant charge - tech. limit: 300g / 10.6oz
- Free gas volume comp.: 2360cm³ / 79.8fl.oz
- Weight: 10.8kg / 23.8lbs
- Motor protection: 2# internal
- Winding resist. ph. to ph.: 5.3Ω (at 25°C)
- Max. winding temp.: 125°C / 257°F
- Max. discharge temp.: 130°C / 266°F
Refrigerant(s): R290
Displacement: 10.09cm³ / 0.62cu.in
Compressors on pallet: 80
General - Configurations and Applications with NLV10CN and Controller
| Conf. 1 | Conf. 2 | Conf. 3 | Conf. 4 | |
|---|---|---|---|---|
| Sales code single pack: | 105N4910 | 105N4960 | 105N4962 | 105N4866 |
| Sales code industry pack: | 105N4911 | 105N4961 | 105N4963 | 105N4867 |
| Power supply (nominal): | 220-240V 50/60Hz | 100-240V 50/60Hz | 100-240V 50/60Hz | 100-240V 50/60Hz |
| Approvals: | VDE,CCC | VDE, UL, CCC, CB | VDE, UL, CCC, CB | CCC, VDE, UL, CB |
| Refrigerant: | R290 | R290 | R290 | R290 |
| Number of phases: | 1~AC | 1~AC | 1~AC | 1~AC |
| Application: | LBP+MBP | LBP+MBP | LBP+MBP | LBP+MBP |
| Starting torque: | HST | HST | HST | HST |
| Hot gas defrost: | OK | OK | OK | OK |
| Long interval pull down: | OK | OK | OK | OK |
| System cooling: | fan 3m/s | fan 3m/s | fan 3m/s | fan 3m/s |
Controller functions
| Conf. 1 | Conf. 2 | Conf. 3 | Conf. 4 | |
|---|---|---|---|---|
| Protection: | Mechanic | Mechanic | Mechanic | Mechanic |
| Max output power: | 1000 W | 1000 W | 1000 W | 1000 W |
| No of relays: | 2 | 2 | 2 | 8 |
| Hot gas defrost: | yes | yes | yes | yes |
| AEO speed setting: | yes | yes | yes | N |
| Serial com. (Modbus): | SWI | SWI | SWI | RS485 |
| DWI / Frequency input: | yes | yes | yes | N |
| Note: | - | - | US GFCI-Conformity | - |
Compressor Dimensions
Housing:
| Dimension | Value (mm) | Value (in) |
|---|---|---|
| A Height | 203 | 7.99 |
| B Height | 197 | 7.76 |
| C Length shell | 205 | 8.07 |
| D Length w. cover | 252 | 9.92 |
| E Width | 166 | 6.54 |
Connectors:
| Suction (X) | Discharge (Y) | Process (Z) | |
|---|---|---|---|
| Diameter [mm] (i:inside, o:outside) | øi 8.11-8.29 (øi 0.32-0.33) | øi 6.11-6.29 (øi 0.24-0.25) | øi 6.11-6.29 (øi 0.24-0.25) |
| Material | copper | copper | copper |
| Horizontal angle | +2° | 0° | 0° |
| Vertical angle | +2° | 15° | 21° |
| Position (h/w) [mm] | 132/69/57 (5.2/2.7/2.2) | 94/102/81 (3.7/4/3.2) | -109/94/72 (-4.3/3.7/2.8) |
| Straight tube l. [mm] | 12 (0.5) | 12 (0.5) | 12 (0.5) |
Compressor Fixation
Baseplate [mm] [inch]: BI: 204 (8.03), Bw: 132 (5.2)
Large holes [mm] [inch]: Ø 9.7 (0.38), Ø 19 (0.75)
Small holes [mm] [inch]: Ø 16 (0.63), Ø 170 (6.7), Sw: 70 (2.76)
Bolt joint: Washer, Compressor base, Nut, Sleeve, Cabinet base, Bolt, Rubber grommet
Snap-on: Washer, Compressor base, Clip, Steel pin, Cabinet base, Rubber grommet
Mounting accessories
| one comp. | multi pack | |
|---|---|---|
| Bolt joint | M6 | Ø16mm | 118-1917 | 118-1918 |
| Bolt joint | ø1/4" | Ø16mm | 118-1946 | |
| Bolt joint | ø1/4" | Ø19mm | 118-1949 | |
| Snap-on | ø7.3 | Ø16mm | 118-1947 | 118-1919 |
Application notes
- Operation possible until tilted up to 3 degrees.
- Provision for PE Grounding is located at the PE Stamp on the compressor.
Configuration Specific Data
Conf. 1 (NLV MP 230V)
Sales code single pack: 105N4910 (1 units)
Sales code industry pack: 105N4911 (8 units)
Adaption to compressor: detached
Protection class: IP54
Weight: 1.4 kg / 3.08 lbs
Voltage nom.: 220-240V 50/60Hz
Voltage range: 180-270 V
Max. current: 8.4 A (230 V)
LRA (Locked Rotor Amperage): 1.2 A
Cable length: 680 mm
Compressor speed range: 2000-4500 rpm
Housing plastic: UL94-5VA
QR Code and Hyperlink: Leads to the Operating Instructions.
Operation Limits: Suctiongas temperature < +20°C (continuous operation)
System cooling: Fan cooling 3m/s. Ensure proper airflow of 3 m/s at both compressor and electronic units. The airflow for the electronics must be directed to the heat sink.
Ambient/machineroom temperatures minimum/maximum:
- Ambient temperature range: 10-43°C / 50-110°F
- Machine room temperature range compressor: 10-48°C / 50-119°F
- Machine room temperature range controller: 10-50°C / 50-122°F
Conf. 2 (NLV MP MV)
Sales code single: 105N4960 (1 units)
Sales code industry pack: 105N4961 (8 units)
Adaption to compressor: detached
Protection class: IP54
Weight: 1.4 kg / 3.08 lbs
Voltage nom.: 100-240V 50/60Hz
Voltage range: 90-150/180-270 V
Max. current: 4.2 A (230 V) / 8.4 A (115 V)
LRA (Locked Rotor Amperage): 1.2 A
Cable length: 680 mm
Compressor speed range: 2000-4500 rpm
Housing plastic: UL94-5VA
QR Code and Hyperlink: Leads to the Operating Instructions.
Operation Limits: Suctiongas temperature < +20°C (continuous operation)
System cooling: Fan cooling 3m/s. Ensure proper airflow of 3 m/s at both compressor and electronic units. The airflow for the electronics must be directed to the heat sink.
Ambient/machineroom temperatures minimum/maximum:
- Ambient temperature range: 10-43°C / 50-110°F
- Machine room temperature range compressor: 10-48°C / 50-119°F
- Machine room temperature range controller: 10-50°C / 50-122°F
Conf. 3 (NLV MP MV GFCI)
Sales code single: 105N4962 (1 units)
Sales code industry pack: 105N4963 (8 units)
Adaption to compressor: detached
Protection class: IP54
Weight: 1.4 kg / 3.08 lbs
Voltage nom.: 100-240V 50/60Hz
Voltage range: 90-150/180-270 V
Max. current: 4.2 A (230 V) / 8.4 A (115 V)
LRA (Locked Rotor Amperage): 1.2 A
Cable length: 915 mm
Compressor speed range: 2000-4500 rpm
Housing plastic: UL94-5VA
QR Code and Hyperlink: Leads to the Operating Instructions.
Operation Limits: Suctiongas temperature < +20°C (continuous operation)
System cooling: Fan cooling 3m/s. Ensure proper airflow of 3 m/s at both compressor and electronic units. The airflow for the electronics must be directed to the heat sink.
Ambient/machineroom temperatures minimum/maximum:
- Ambient temperature range: 10-43°C / 50-110°F
- Machine room temperature range compressor: 10-48°C / 50-119°F
- Machine room temperature range controller: 10-50°C / 50-122°F
Conf. 4 (NLV XT MV)
Sales code single: 105N4866 (1 units)
Sales code industry pack: 105N4867 (8 units)
Adaption to compressor: detached
Protection class: IP43
Weight: 1.5 kg / 3.3 lbs
Voltage nom.: 100-240V 50/60Hz1~AC
Voltage range: 90-150/180-270 V
Max. current: 4.2 A (230 V) / 8.4 A (115 V)
LRA (Locked Rotor Amperage): 1.2 A
Cable length: 630 mm
Compressor speed range: 2000-4500 rpm
Housing plastic: UL94-5VA
QR Code and Hyperlink: Leads to the Operating Instructions.
Operation Limits: Suctiongas temperature < +20°C (continuous operation)
System cooling: Fan cooling 3m/s. Ensure proper airflow of 3 m/s at both compressor and electronic units. The airflow for the electronics must be directed to the heat sink.
Ambient/machineroom temperatures minimum/maximum:
- Ambient temperature range: 10-43°C / 50-110°F
- Machine room temperature range compressor: 10-48°C / 50-119°F
- Machine room temperature range controller: 10-50°C / 50-122°F
Performance Data
The document includes detailed performance data tables and graphs for various operating conditions and RPMs, including:
- Cooling capacity
- COP (Coefficient of Performance)
- EER (Energy Efficiency Ratio)
- Power consumption (P1)
- Current consumption
- Ref. mass flow
Graphs illustrate COP vs. cooling capacity for different RPMs under R290, 220V, 50Hz conditions.
Test conditions are provided for ASHRAE LBP, ASHRAE MBP, cecomaf LBP, cecomaf MBP, EN12900 LBP, and EN12900 MBP.
Controller Connections and Wiring
Detailed diagrams illustrate controller connections for various configurations, including:
- RAST 5 and RAST 2.5 connectors
- Spade connectors
- Thermostat, Defrost, Condenser fan connections
- AEO mode, LSW, Single wire interface (SWI), Frequency signal, Dual wire interface (DWI), Modbus protocol
- Mains supply (L, N, Earth)
- Relay connections (RL1, RL2, etc.)
- Sensor and Input/Output (I/O) connections
Wiring tables specify colors for Mains, RL1-RL8, S1-S4, AIO, DIO1, DIO2, and Display.
Instructions and Safety
Service/Repair R290
Safety precautions for servicing R290 refrigerant are highlighted, including handling of electrical equipment and brazing procedures.
Brazing on Suction Connectors (Direct Intake)
Maximum temperature for brazing at the socket is 150°C/302°F. Recommended brazing solder is phosphor (LP7) or silver. Refer to Product Bulletin for specific details.
Airflow Requirements
A minimum airflow of 3 m/s is required for both the compressor and electronic units. Airflow for electronics must be directed to the heat sink. Diagrams illustrate correct and incorrect airflow patterns.
Operating and Storage Conditions
- Operating conditions: +5 °C to 43 °C - humidity < 90 % rH non condensing
- Storage conditions: -25 °C to 70 °C - humidity < 90 % rH non condensing
Supply voltage: 100-240 V (± 10 %)
Frequency: 50/60 Hz
Input power, max.: 1000 W
Accessories
Available accessories include plastic covers for the compressor and controller.
