Assembly Instructions
Before you begin assembly, ensure you have the necessary tools: a screwdriver and a spirit level. It is recommended to assemble the furniture on a soft surface, such as a rug, to protect the parts and your floor. If you encounter any difficulties or are unsure about any step, seek professional assistance.
Parts Included
- 8x Screws (item 114142)
- 8x Dowels/Plugs (item 194732)
- 2x Brackets (item 10046332)
- 2x Washers (item 10101633)
- 12x Screws (item 10044713)
- 1x Allen Key (item 100092)
- 12x Shelf Supports (item 10042566)
- 2x Brackets (item 10042534)
- 2x Brackets (item 10044727)
- 2x Dowels/Plugs (item 10100556)
- 2x Brackets (item 10044713)
- 2x Dowels/Plugs (item 10100447)
- 4x Screws (item 152059)
- 4x Screws (item 108736)
Step 1: Assemble Base Frame
Attach two side panels to a base frame piece. Use four screws (114142) and two brackets (100092) for this connection.
Step 2: Insert Back Panels
Slide the two textured back panels into the grooves of the assembled frame. Secure each panel using four dowels (194732).
Step 3: Attach Top and Bottom Frames
Connect the top and bottom frame pieces to the side panels.
Step 4: Secure Main Frame
Use four screws (114142) and the provided Allen key (100092) to firmly secure the main frame structure.
Step 5: Attach Second Side Panels
Attach the remaining two side panels to the frame using four dowels (194732) per panel.
Step 6: Attach Top Panel
Secure the top panel onto the assembled frame using the provided brackets and screws. Ensure they click into place.
Step 7: Install Shelf Supports
Insert twelve shelf supports (10042566) into the pre-drilled holes on the inner sides of the unit. They should click into place.
Step 8: Insert Shelves
Place the shelves onto the installed shelf supports.
Step 9: Attach Wall Mounting Hardware
Fix the wall mounting brackets to the top rear of the unit using four screws (152059).
Step 10: Secure Unit to Wall
Position the unit against the wall. Attach it securely using appropriate wall screws and plugs (not included), as indicated by screws (108736).
Maximum Configuration
The unit can be stacked up to a maximum height of 300 cm (118 7/64 inches).
Additional Components
Attach two brackets (10046332) with two washers (10101633) to secure additional components or configurations.
