Lightailing Neuschwanstein Castle #21063 LED Lighting Kit Installation Guide

Getting Started & Conventions

This manual uses icons to represent actions and conventions:

• [Dismantle]: Indicates a step involving disassembly or careful removal of parts.
• [Install]: Indicates a step where a component is being installed or attached.
• [Wind]: Indicates routing or wrapping a wire around a part.
• [Penetrate]: Indicates passing a wire through or into a section of the model.
• [Pull]: Indicates gently pulling a wire to secure it or route it.
• [Turn]: Indicates rotating a component or wire.

Contact Information: For assistance, visit www.lightailing.com, email support@lightailing.com, or find us on Facebook and Instagram @Lightailing.

Suitable for ages 8 and up.

Step 1: Initial Wire Routing

Begin by carefully routing the first set of wires through the base of the castle model. Follow the path indicated by the diagrams, ensuring wires are not pinched.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 2: Connecting First Lights

Connect the first LED lights to the designated points on the routed wires. Ensure a secure connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 3: Expanding Wiring

Continue routing wires along the base and up towards the first sections of the castle structure. Pay attention to the specific paths shown.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 4: Securing Wires

Gently pull wires to ensure they are taut but not strained. Secure them using the provided connectors or by tucking them into designated spaces.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 5: Adding Lights to Walls

Install LED lights into the walls and lower sections of the castle. Route the wires discreetly behind or between bricks.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 6: Routing to Towers

Begin routing wires towards the castle towers, ensuring they follow the internal structure or designated channels.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 7: Connecting Tower Lights

Attach LED lights to the towers, connecting them to the wires that have been routed to these areas.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 8: Integrating Lights into Details

Install lights into specific architectural details, such as windows or decorative elements, as shown in the diagrams.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 9: Wire Management

Carefully manage all wires, tucking them away neatly to maintain the aesthetic of the model. Avoid crossing wires unnecessarily.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 10: Connecting Multiple LEDs

Connect multiple LEDs in sequence as indicated. Pay close attention to the numbering on the wires and the connection points.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 11: Routing for Upper Sections

Continue routing wires to the higher sections and roofs of the castle, ensuring smooth passage through the building block structure.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 12: Attaching Lights to Turrets

Install LED lights onto the turrets and spires, connecting them to the corresponding wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 13: Final Wire Connections

Connect the main wire harness to the power source (e.g., battery pack). Ensure all connections are secure.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 14: Securing Excess Wires

If there are excess wire lengths, carefully bundle or tuck them away. Some steps may involve cutting excess parts of the wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 15: Integrating Small Components

Attach small lighting components and connectors as shown in the diagrams, ensuring they fit precisely.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 16: Completing Tower Details

Install the final lights and components onto the castle towers, ensuring all wiring is hidden and connections are made.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 17: Final Assembly Check

Review the entire model to ensure all lights are correctly placed and wires are managed. Perform a final test.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 18: Attaching Final Elements

Attach any remaining decorative elements or structural parts that house the lighting components.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 19: Wire Routing Through Structure

Carefully thread wires through the internal structure of the castle, following the indicated paths to connect various lighting points.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 20: Connecting Lights to Specific Points

Connect the LED lights to the numbered connection points on the wires as shown in the detailed diagrams.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 21: Finalizing Connections

Ensure all wire connections are secure and properly insulated. Route any remaining wires to the power source.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 22: Cutting Excess Parts

Some steps may require cutting off excess wire parts for a cleaner installation. Use caution when cutting.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 23: Final Light Placement

Install the last set of LED lights into their designated positions, ensuring they are visible and correctly oriented.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 24: Final Model Assembly

Complete the assembly of the castle model, integrating the lighting system seamlessly into the structure.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 25: Connecting Power Source

Connect the main power cable to the battery pack or USB power source. Ensure the connection is firm.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 26: Final Testing

Turn on the power to test all installed lights. Verify that every LED is functioning correctly and illuminating the castle as intended.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 27: Completing the Castle

Attach any final exterior pieces to conceal wiring and complete the visual appearance of the illuminated castle.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 28: Final Touches

Ensure all wires are neatly tucked away and no components are loose. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 29: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 30: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 31: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 32: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 33: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 34: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 35: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 36: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 37: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 38: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 39: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 40: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 41: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 42: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 43: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 44: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 45: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 46: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 47: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 48: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 49: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 50: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 51: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 52: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 53: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 54: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 55: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 56: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 57: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 58: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 59: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 60: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 61: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 62: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 63: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 64: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 65: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 66: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 67: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 68: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 69: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 70: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 71: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 72: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 73: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 74: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 75: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 76: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 77: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 78: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 79: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 80: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 81: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 82: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 83: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 84: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 85: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 86: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 87: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 88: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 89: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 90: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 91: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 92: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 93: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 94: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 95: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 96: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 97: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 98: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 99: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 100: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 101: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 102: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 103: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 104: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 105: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 106: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 107: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 108: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 109: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 110: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 111: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 112: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 113: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 114: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 115: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 116: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 117: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 118: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 119: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 120: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 121: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 122: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 123: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 124: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 125: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 126: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 127: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 128: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 129: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 130: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 131: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 132: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 133: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 134: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 135: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 136: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 137: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 138: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 139: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 140: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 141: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 142: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 143: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 144: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 145: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 146: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 147: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 148: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 149: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 150: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 151: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 152: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 153: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 154: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 155: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 156: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 157: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 158: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 159: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 160: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 161: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 162: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 163: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 164: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 165: Final Wire Bundling

Bundle any excess wires neatly and secure them in a hidden location to maintain the model's appearance.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 166: Connecting Power

Connect the main power cable to the battery pack or USB adapter. Ensure all connections are secure before testing.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 167: Testing the Lighting System

Turn on the power to verify that all installed lights are working correctly. Address any issues before proceeding.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 168: Final Model Integration

Ensure all lighting components are integrated seamlessly into the castle structure. The installation is now complete.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 169: Attaching Lights to Towers (Detail)

Carefully attach LED lights to the specific points on the castle towers as indicated, ensuring wires are routed through small openings.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 170: Routing Wires for Upper Levels

Continue routing wires to the highest points of the castle, such as the tallest spires, ensuring they are secured.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 171: Connecting Lights to Windows

Install LED lights into the castle windows, connecting them to the wires that have been routed to these locations.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 172: Securing Wires with Connectors

Use the provided connectors to join wires or attach them to specific points on the model, ensuring a stable connection.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 173: Routing Wires Along Edges

Carefully route wires along the edges and contours of the castle structure, using the brick connections to guide them.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Step 174: Attaching Lights to Roofs

Install LED lights onto the roofs of various castle sections, connecting them to the appropriately routed wires.

[Dismantle] [Install] [Wind] [Penetrate] [Pull] [Turn]

Congratulations!

You have successfully installed the lighting kit! Thank you for choosing Lightailing products. If you have any questions or encounter issues, please contact us directly for assistance. We hope you enjoy your illuminated Neuschwanstein Castle!

More information at www.lightailing.com. Email: support@lightailing.com. Follow us on Facebook and Instagram @Lightailing.

©Designed by Lightailing