Manuals+

Lightailing LED Lighting Kit for Transformers Soundwave

Model: Transformers Soundwave 10358, Item No.: LGK790

For Ages 8 and Up

Introduction and Pre-Installation

You can scan the QR code (excluded) and use the item number to search for video support at www.lightailing.com. Email: support@lightailing.com.

Important Note: LED lights are fragile and can be easily damaged. Handle them with extreme care.

Pre-Installation Test: Before installation, test all LED lights to ensure they illuminate correctly. If any lights do not work, please contact Lightailing customer support.

Icon Key

Installation Steps

  1. Step 1: Pre-installation Check

    Test all LED lights to confirm illumination. Contact support if any lights fail.

  2. Step 2: Component Preparation

    Prepare the LED wires and power source.

  3. Step 3: Connect Power Source

    Connect LED wires to the power source.

  4. Step 4: Position Figure

    Position the robot figure for assembly.

  5. Step 5: Route Wires

    Route wires 1, 2, and 3 through the robot's body.

  6. Step 6: Attach Torso Component

    Attach a component to the robot's torso.

  7. Step 7: Connect Torso Wires

    Connect wires to the torso component.

  8. Step 8: Position Figure

    Position the robot figure.

  9. Step 9: Prepare Component

    Prepare a component with attached wires.

  10. Step 10: Attach Leg Component

    Attach the component to the robot's leg.

  11. Step 11: Connect Leg Wires

    Connect wires to the leg component.

  12. Step 12: Connect Port

    Connect the wire to the designated port.

  13. Step 13: Route Torso Wires

    Route wires within the robot's torso.

  14. Step 14: Feed Arm Wire

    Feed a wire through the robot's arm.

  15. Step 15: Insert Chest Component

    Insert a component into the robot's chest.

  16. Step 16: Position Figure

    Position the robot figure.

  17. Step 17: Attach Arm Component

    Connect a component to the robot's arm.

  18. Step 18: Position Figure

    Position the robot figure.

  19. Step 19: Prepare Small Component

    Prepare a small component.

  20. Step 20: Position Figure

    Position the robot figure.

  21. Step 21: Connect Wires to Component

    Connect wires 1, 2, and 3 to a component.

  22. Step 22: Attach Component to Arm

    Attach the component to the robot's arm.

  23. Step 23: Prepare Component

    Prepare a component.

  24. Step 24: Connect Component Wires

    Connect wires to the component.

  25. Step 25: Attach Component to Arm

    Attach the component to the robot's arm.

  26. Step 26: Connect Arm Wires

    Connect wires to the arm component.

  27. Step 27: Attach Shoulder Component

    Attach the component to the robot's shoulder.

  28. Step 28: Prepare Head

    Prepare the robot's head.

  29. Step 29: Attach Head Component

    Attach a component to the robot's head.

  30. Step 30: Attach Head

    Attach the robot's head.

  31. Step 31: Connect Head Wires

    Connect wires to the head assembly.

  32. Step 32: Position Figure

    Position the robot figure.

  33. Step 33: Position Figure

    Position the robot figure.

  34. Step 34: Connect Body Wires

    Connect wires to the robot's body.

  35. Step 35: Route Arm Wires

    Route wires through the robot's arm.

  36. Step 36: Position Figure

    Position the robot figure.

  37. Step 37: Position Figure

    Position the robot figure.

  38. Step 38: Prepare Small Components

    Prepare small components for attachment.

  39. Step 39: Connect Component Wires

    Connect wires to the components.

  40. Step 40: Attach Leg Components

    Attach components to the robot's leg.

  41. Step 41: Route Leg Wires

    Route wires through the robot's leg.

  42. Step 42: Attach Leg Components

    Attach components to the robot's leg.

  43. Step 43: Connect Leg Wires

    Connect wires to the leg components.

  44. Step 44: Position Figure

    Position the robot figure.

  45. Step 45: Connect Arm Wires

    Connect wires to the robot's arm.

  46. Step 46: Prepare Component

    Prepare a component.

  47. Step 47: Connect Component Wires

    Connect wires to the component.

  48. Step 48: Position Figure

    Position the robot figure.

  49. Step 49: Connect Arm Wires

    Connect wires to the robot's arm.

  50. Step 50: Position Figure

    Position the robot figure.

  51. Step 51: Connect Arm Wires

    Connect wires to the robot's arm.

  52. Step 52: Position Figure

    Position the robot figure.

  53. Step 53: Prepare LED Component

    Prepare a small LED component.

  54. Step 54: Attach LED Component

    Attach the LED component to the robot's torso.

  55. Step 55: Connect LED Wires

    Connect wires to the LED component.

  56. Step 56: Position Figure

    Position the robot figure.

  57. Step 57: Route Arm Wires

    Route wires through the robot's arm.

  58. Step 58: Connect Arm Component

    Connect wires to the arm component.

  59. Step 59: Position Figure

    Position the robot figure.

  60. Step 60: Connect Arm Wires

    Connect wires to the robot's arm.

  61. Step 61: Position Figure

    Position the robot figure.

  62. Step 62: Position Figure

    Position the robot figure.

  63. Step 63: Final Assembly

    The completed robot figure with the lighting kit installed.

  64. Step 64: Final Assembly

    The completed robot figure with the lighting kit installed.

Congratulations and Support

Congratulations on successfully installing the lighting kit! Lightailing is proud of your achievement. Thank you for purchasing Lightailing products. For any questions or issues with our products, please contact us directly for assistance. We are always here to help.

We hope you will come back soon. Thanks again!

Find more information at www.lightailing.com.

Email: support@lightailing.com.

Follow us on Facebook: Lightailing, Instagram: lightailing, YouTube: Lightailing.

Other Lightailing products shown: Lightailing 10323, Lightailing 10317, Lightailing 10312, Lightailing 10307.

Designed by Lightailing.

Models: K790, 10358 Transformers Soundwave, 10358, Transformers Soundwave, Soundwave

File Info : application/pdf, 10 Pages, 14.25MB

PDF preview unavailable. Download the PDF instead.

LGK790- Transformers: Soundwave #10358

References

Corel PDF Engine Version 22.0.0.412 CorelDRAW 2020

Related Documents

PreviewLightailing Neuschwanstein Castle #21063 LED Lighting Kit Installation Guide
Detailed instructions for installing the Lightailing LED lighting kit for the LEGO Neuschwanstein Castle #21063 set (LGK775). Learn how to connect wires and lights for a stunning display.
PreviewLightailing LED Light Kit Installation Guide for LEGO Republic Juggernaut 75413
Step-by-step instructions for installing the Lightailing LED lighting kit on the LEGO Star Wars Republic Juggernaut 75413 (Set 75413), item LGK781. Includes visual guides, icon key, and contact information.
PreviewLightailing LED Lighting Kit for Lamborghini Revuelto Super Sports Car (42214)
Step-by-step instructions for installing the Lightailing LED lighting kit on the Lamborghini Revuelto Super Sports Car model (42214, Item No. LGK792). Includes detailed guidance on wiring and component placement.
PreviewLGK607 Lightailing LED Lighting Kit Assembly Instructions for 1961 Chevrolet Corvette Model
Comprehensive assembly guide for the Lightailing LGK607 LED lighting kit, designed to enhance a 1961 Chevrolet Corvette model car. This manual provides step-by-step instructions for installing LEDs, wiring components, and powering the lighting system.
PreviewLightailing Italian Riviera 21359 Lighting Kit Installation Guide
Detailed instructions for installing the Lightailing LED lighting kit for the LEGO Italian Riviera 21359 building set. Learn how to enhance your model with lights.
PreviewLightailing LGK779 Hibiscus Lighting Kit Installation Guide
Step-by-step instructions and component guide for installing the Lightailing LGK779 Hibiscus LED lighting kit. Enhance your model with detailed illumination.
PreviewLightailing LED Light Kit for LEGO Assembly Square 10255 Installation Guide
Detailed instructions for installing the Lightailing LED light kit for the LEGO Creator Expert Assembly Square (10255) set. Learn how to illuminate your model with step-by-step guidance.
PreviewLightailing LGK100 LED Light Kit for Shanghai 21039 - Installation Guide
Detailed instructions for installing the Lightailing LGK100 LED light kit for the Shanghai 21039 model. This guide provides a step-by-step process to enhance your building toy with lighting.