Lightailing Mini Bonsai Trees 10373 LED Lighting Kit
Item No.: LGK776
For Ages 8+ ⬆️
Important Information and Conventions
This manual uses the following icons and conventions to help you obtain the necessary information:
- [Install Building Blocks]: EN: Install building blocks; DE: Bausteine installieren; FR: Installer les blocs de construction; ES: Instalar los bloques de construction; IT: Installare i blocchi di costruzione
- [Dismantle Building Blocks]: EN: Dismantle building blocks; DE: Bausteine abbauen; FR: Démanteler les blocs de construction; ES: Desmontar los bloques de construcción; IT: Smontare i blocchi di costruzione
- [Wind Cable]: EN: Wind the cable around building blocks; DE: Das Kabel um die Bausteine wickeln; FR: Enrouler le câble autour des blocs de construction; ES: Enrollar el cable alrededor de los bloques de construcción; IT: Avvolgere il cavo intorno ai blocchi di costruzione
- [Penetrate Cable]: EN: Penetrate across building blocks; DE: Durch die Bausteine hindurchdringen; FR: Pénétrer à travers les blocs de construction; ES: Perforar a través de los bloques de construcción; IT: Penetrare attraverso i blocchi di costruzione
- [Pull Cable]: EN: Pull the cable on building blocks forward; DE: Das Kabel auf den Bausteinen nach vorne ziehen; FR: Tirer le câble sur les blocs de construction vers l'avant; ES: Tirar el cable sobre los bloques de construction hacia adelante; IT: Tirare il cavo sui blocchi di costruzione in avanti
- [Turn Block]: EN: Turn the building blocks around; DE: Die Bausteine umdrehen; FR: Tourner les blocs de construction; ES: Girar los bloques de construcción; IT: Girare i blocchi di costruzione
Caution: EN: LED lights damage easily, please take it as carefully as you can. DE: LED-Lichter gehen leicht kaputt, bitte behandeln Sie sie so vorsichtig wie möglich. FR: Les lumières LED s'endommagent facilement, veuillez les manipuler aussi soigneusement que possible. ES: Las luces LED se dañan fácilmente, por favor manéjelas con el mayor cuidado posible. IT: Le luci LED si danneggiano facilmente, per favore maneggiale con la massima cura possibile.
Pre-installation Test: Before installation, please test the lights to ensure all components light up. If the lights do not function, please contact customer support.
Installation Guide
- Step 1: Prepare wire components (1, 2, 3).
- Step 2: Connect wires to the structure.
- Step 3: Assemble the first bonsai tree base.
- Step 4: Place the first bonsai tree structure onto its base.
- Step 5: Route wires (1, 2, 3) through the branches of the first bonsai tree.
- Step 6: Manage and secure wires within the first bonsai tree structure.
- Step 7: Attach leaves and branches to the first bonsai tree.
- Step 8: Continue attaching leaves and branches, managing wires.
- Step 9: Attach more leaves and branches to the first bonsai tree.
- Step 10: Continue adding foliage to the first bonsai tree.
- Step 11: Attach final leaves and branches to the first bonsai tree.
- Step 12: Complete the assembly of the first bonsai tree with lights.
- Step 13: Attach a leaf to the structure.
- Step 14: Route wire (2) through the structure.
- Step 15: Continue managing wires.
- Step 16: Continue managing wires.
- Step 17: Attach more leaves.
- Step 18: Attach more leaves.
- Step 19: Attach more leaves.
- Step 20: Attach more leaves, managing wire (3).
- Step 21: Assemble the second bonsai tree structure.
- Step 22: Prepare the base for the second bonsai tree.
- Step 23: Place the base component.
- Step 24: Attach the second bonsai tree structure to its base.
- Step 25: Attach the base components.
- Step 26: Secure the base.
- Step 27: Complete the second bonsai tree assembly.
- Step 28: The second bonsai tree is now assembled with lights.
- Step 29: Assemble the third bonsai tree structure.
- Step 30: Prepare the base for the third bonsai tree.
- Step 31: Show the LED beads (1, 2, 3) and wires.
- Step 32: Attach the third bonsai tree structure to its base.
- Step 33: Connect wires (2, 3) to the base.
- Step 34: Complete the third bonsai tree assembly.
- Step 35: The third bonsai tree is now assembled with lights.
- Step 36: Place the final base component.
- Step 37: Attach the base.
- Step 38: Complete the assembly of the first bonsai tree with lights.
- Step 39: The first bonsai tree with lights is complete.
- Step 40: The second bonsai tree with lights is complete.
- Step 41: Show the wire connections (1, 2, 3, 4).
- Step 42: Attach the final base for the display.
- Step 43: Connect the wires to the power source.
- Step 44: Attach the final tree structure to the base.
- Step 45: The complete set of bonsai trees with lights is assembled.
- Step 46: Attach the base components.
- Step 47: Secure the base.
- Step 48: Attach the final tree structure.
- Step 49: Attach more leaves and branches.
- Step 50: Continue attaching leaves and branches.
- Step 51: Attach the final leaves and branches.
- Step 52: Complete the assembly of the first bonsai tree with lights.
- Step 53: Continue attaching leaves and branches.
- Step 54: Continue attaching leaves and branches.
- Step 55: Continue attaching leaves and branches.
- Step 56: Continue attaching leaves and branches.
- Step 57: Attach the final leaves and branches.
- Step 58: Complete the assembly of the first bonsai tree with lights.
- Step 59: Attach the final leaves and branches.
- Step 60: Complete the assembly of the first bonsai tree with lights.
- Step 61: Final assembly of the bonsai tree with lights.
- Step 62: Shows the completed Lightailing kits: 10329, 10328, 10313, 10331, and a butterfly model.
Congratulations!
You have successfully installed the lighting kit! I am so proud of you. Good Job!
Thank you for purchasing our products. If you encounter any questions or issues with our products, please contact us directly for assistance. We are always here to help.
We sincerely hope you will return soon. Thanks again!
More information is available at www.lightailing.com.
Email: support@lightailing.com
Follow us on social media:
- Facebook: Lightailing
- Instagram: lightailing
- YouTube: Lightailing
Designed by Lightailing