JLab JBuds Air Sport True Wireless Earbuds
Thank you for purchasing JLab. JLab is committed to developing products that allow customers to enjoy the best audio.
Support & Warranty
Warranty: All warranty claims are subject to JLab's approval and our sole discretion. Please keep your proof of purchase to ensure warranty coverage. ?️
Contact Us: For inquiries, please contact support@jlab.com or visit intl.jlab.com/contact.
Register Now: Get the latest product information, usage tips, and FAQs at intl.jlab.com/register. ✍️
Initial Setup
1. Auto-Connect Earbuds
A. Remove the stickers from the earbuds before placing them in the charging case.
B. Press and hold the touch sensors on both earbuds for 3 seconds to power them on. One earbud will light up solid white, while the other will flash blue and white, indicating they are ready to pair with your device.
Diagram Description: Shows an earbud with a sticker to be removed, and a hand pressing the touch sensor for 3 seconds. Indicator lights are shown changing from off to solid white and flashing blue/white.
2. Connect via BLUETOOTH
Select "JLab JBuds Air Sport" in your device's Bluetooth settings. A successful connection is indicated by two beeps and a solid white light on the earbuds.
Diagram Description: Shows a smartphone screen with Bluetooth settings, highlighting the selection of 'JLab JBuds Air Sport' and a confirmation of connection.
Adding New BLUETOOTH Devices
Turn off Bluetooth on previously connected devices. Turn on Bluetooth on the new device and remove the earbuds from the case. The earbuds will automatically enter Bluetooth pairing mode. Select "JLab JBuds Air Sport" in your device's settings to connect.
Product Overview & Accessories
Earbuds
- Left Touch Sensor
- Right Touch Sensor
- Indicator Light
Eartips
- Size S
- Size M
- Size L
- Cloud Foam
Charging Case
- Charge Indicator Light
- USB Charging Port
Button Functions
Left Earbud Functions
- Volume Down: Single tap. ?
- Activate Voice Assistant (SIRI/OK GOOGLE): Double tap. ?️
- Switch Music/Movie Mode: Press and hold for 1 second.
- Change EQ: Triple tap (cycles through 3 EQ settings). ?️
- Power On: Press and hold for 3 seconds.
Right Earbud Functions
- Volume Up: Single tap. ?
- Play/Pause: Double tap. ▶️/⏸️
- Next Track: Press and hold for 1 second. ⏭️
- Calls (Answer/End): Single tap to answer, double tap to end.
- Reject Call: Press and hold for 1 second.
- BE AWARE On/Off: Triple tap.
- Power On: Press and hold for 3 seconds.
Sound Prompts
- Power On: Chime
- Bluetooth Connected: 2 Beeps
- Low Battery: "Low Battery" (below 20%) ?
- Power Off: Chime
Turning Off Earbuds without Case: Disconnect from Bluetooth settings in your device. The earbuds will power off automatically after 3 minutes.
Equalizer (EQ) Modes
Triple tap the left earbud to cycle through EQ settings. A sound prompt will indicate the selected EQ mode.
- JLab SIGNATURE (1 beep): Emphasizes vocals and bass for a balanced sound.
- BALANCED (2 beeps): Provides a balanced audio experience.
- BASS BOOST (3 beeps): Enhances bass and sub-bass frequencies.
Charging
Charging Earbuds
1. Placing the earbuds in the charging case will turn them off and begin charging. A blue indicator light on the earbuds shows they are charging; this light turns off when charging is complete.
Diagram Description: Shows earbuds placed inside the charging case, with indicator lights showing the charging status.
Charging the Case
Connect the JBuds Air Sport charging case to a computer or a USB 5V 1A power source (or lower). The indicator light on the case will flash white while charging and turn solid white when fully charged. ?
Diagram Description: Shows the charging case connected to a USB cable, which is then connected to a power source like a computer or wall adapter.
Fitting
Diagram Description: Illustrates three steps for fitting the earbuds: 1. Inserting the earbud into the ear canal. 2. Adjusting the earbud for a secure fit. 3. Final placement for optimal comfort and sound seal.
Troubleshooting
No Audio on Left Earbud / Left & Right Not Connecting (Manual Reset)
1. Delete "JLab JBuds Air Sport" from your device's Bluetooth settings. (See Diagram A)
2. Place both earbuds in the charging case. With one earbud, quickly tap the touch sensor 7 times. The indicator light will flash blue 3 times. Keep the earbud in the case. (See Diagram C1)
3. Repeat step 2 for the other earbud. Quickly tap the touch sensor 7 times. The indicator light will flash blue 3 times. (See Diagram C2)
4. Remove both earbuds from the case and place them within 5 cm (2 inches) of each other. Wait for one earbud to light up solid white and the other to flash blue/white. They are now ready to pair with your device.
Diagram Description: Diagram A shows deleting the device from Bluetooth settings. Diagrams C1 and C2 show tapping the earbud touch sensors multiple times.
BLUETOOTH Device Not Connecting/Reconnecting
1. Delete "JLab JBuds Air Sport" from your device's Bluetooth settings. (See Diagram A)
2. Turn your device's Bluetooth off and then on again. (See Diagram B)
3. Remove the earbuds from the case. Wait for one earbud to light up solid white and the other to flash blue/white.
4. Select "JLab JBuds Air Sport" in your device's settings to connect.
Diagram Description: Diagram A shows deleting the device from Bluetooth settings. Diagram B shows toggling Bluetooth on and off.
Video Guide: For visual assistance, visit INTL.JLAB.COM/MANUALS.
Quick Tips & Warnings
- Ensure earbuds are completely dry before placing them in the charging case.
- The left or right earbud can be used individually for music and calls. Select one and remove it from the case to connect.
- Choosing the correct ear tip ensures a proper seal with the ear canal, significantly improving audio quality. Test all included ear tips for the best results.
- Only one Bluetooth device can be connected at a time. Turn off Bluetooth on unnecessary devices and turn on Bluetooth on the desired device to establish a connection.
Warning: ⚠️ Ensure earbuds are completely dry before placing them in the charging case. Wet or moist earbuds can cause damage to the charging case. Damage resulting from moisture or sweat will void the warranty.
Precautions
- Avoid exposure to extreme heat, cold, and humidity.
- Do not drop or crush the earbuds.
- Earwax buildup on the earbud tips can degrade sound quality. Carefully remove earwax using a cotton swab or other small tool.
- If you experience discomfort or pain, lower the volume or discontinue use temporarily.
- If persistent discomfort occurs during use, stop using the product and consult a doctor.
- Treat your earbuds with care, similar to how you would handle sunglasses. Store them in a safe place when not in use.
Product Information
Explore the full range of JLab products, find product alerts, and learn about headphone burn-in at the JLab Store + Burn-in Tool.
Visit us online: INTL.JLAB.COM
