Shokz OpenMove S661 User Guide
How It Works
This section details the fundamental operations of your Shokz OpenMove headphones.
Headphone Controls
The headphones feature several controls for managing audio, calls, and settings:
Diagram Description: An illustration shows the headphones with labels pointing to:
- LED Indicator: A small light indicating status.
- USB-C Charging Port: The port for charging the device.
- Power/Volume + Button: A button that controls power and increases volume.
- Volume - Button: A button that decreases volume.
- Multifunction Button: A button used for various playback and call functions.
ON/OFF
To turn on the headphones: Press and hold the Power/Volume + Button until the LED Indicator flashes blue. You will hear Audrey say: "Welcome to Shokz".
To turn off the headphones: Press and hold the Power/Volume + Button until the LED Indicator flashes red. You will hear Audrey say: "Power off".
Pairing
Follow these steps to pair your headphones with a device:
- Start with OpenMove turned off.
- Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
- Open your device's Bluetooth settings and select "OpenMove by Shokz". Audrey will say "connected".
Diagram Description: An illustration shows the headphones and a smartphone displaying Bluetooth settings with "OpenMove by Shokz" connected. A Bluetooth logo ? is also visible.
How to Wear
To wear the headphones correctly:
Pick up the headphones, bring them behind the back of the base of your neck, position the earhooks on your ears, then enjoy your music!
*Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.
Diagram Description: Two numbered steps illustrate how to place the headphones around the head and onto the ears.
Volume
Operate volume controls while audio is playing.
How to change volume: While your audio is playing, adjust headphone volume by pressing either the Volume + or Volume - buttons. A "beep" will sound when the volume is at its maximum.
⚠️ Listening with headphones at high volume may affect your hearing and the audio will be distorted.
Diagram Description: An illustration shows the headphones with labels pointing to the Power/Volume + Button and Volume - Button.
Check Battery Status
Operate controls while audio is not playing.
How to check battery status: Click the Volume + or Volume - button while music is paused. Audrey will tell you the battery status: "Battery high/Battery medium/Battery low/Charge me".
Diagram Description: An illustration shows the headphones with labels pointing to the Power/Volume + Button and Volume - Button.
Extra Features
EQ Modes
Your headphones offer different EQ modes for various listening experiences:
- Standard Mode: Balanced frequency for listening to music.
Icon Description: An icon representing an ear with sound waves ??.
- Vocal Booster Mode: Enhanced intermediate frequencies for audiobooks, podcasts, etc.
Icon Description: An icon representing a mouth speaking with sound waves ?️?.
Switching EQ Modes
Operate controls while music is playing.
How to switch EQ mode: Press and hold both buttons (Power/Volume + Button and Volume - Button) while music is playing until you hear a beep. Audrey will say: "Standard Mode/Vocal Booster Mode."
Diagram Description: An illustration shows the headphones with labels pointing to the Power/Volume + Button and Volume - Button.
Multipoint Pairing
Pair Two Devices: Switch between two devices seamlessly with multipoint pairing.
Diagram Description: An illustration shows the Shokz headphones connected to a laptop and a smartphone via Bluetooth ?.
Enabling Multipoint Pairing:
Operate controls with headphones powered off.
Instructions:
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume + button until Audrey says "multipoint enabled."
Diagram Description: An illustration shows the headphones with labels pointing to the Power/Volume + Button and Multifunction Button. A voice icon ?️ indicates Audrey's prompt.
Connecting to First Device:
Diagram Description: A screenshot of a smartphone's Bluetooth settings showing "OpenMove by Shokz" connected.
Audrey will say "connected".
- Open first device's Bluetooth® menu and select "OpenMove by Shokz." Audrey will say "connected".
- Turn your headphones off.
Connecting to Second Device:
Diagram Description: A screenshot of a laptop's Bluetooth settings showing "OpenMove by Shokz" connected.
Audrey will say "connected".
- Re-enter pairing mode by pressing and holding Volume + until Audrey says “pairing” and the LED indicator flashes red and blue alternately.
- Open second device's Bluetooth® menu and select "OpenMove by Shokz." Audrey will say "connected."
- Turn your headphones off.
Final Connection:
You will hear a beep, then Audrey will say "Welcome to Shokz, connected. Second device connected."
- Turn your headphones on. Your headphones are now connected to both devices.
Diagram Description: Illustrations show the headphones connected to both a smartphone and a laptop.
Turn Multipoint Pairing Off
Operate controls with headphones powered off.
Instructions:
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button and Volume - button until Audrey will say "multipoint disabled."
Diagram Description: An illustration shows the headphones with labels pointing to the Volume - Button and Multifunction Button. A voice icon ?️ indicates Audrey's prompt.
Restore Factory Settings
Operate controls with headphones powered off.
Instructions:
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
- Press and hold the multifunction button, Volume – button and Volume + button until you hear two beeps and feel the vibration.
- Turn your headphones off. OpenMove is now reset and can be re-paired to your device.
Diagram Description: An illustration shows the headphones with labels pointing to the Power/Volume + Button, Volume - Button, and Multifunction Button.
Changing Languages
Your headphones have four built-in languages: Chinese, English, Japanese and Korean.
Follow the instructions when headphones are powered off:
- Start with your headphones powered off.
- Press and hold Volume + until Audrey will say "pairing" and the LED indicator flashes red and blue alternately.
- Double-press the multifunction button. Languages have been switched when you hear the corresponding language.
Diagram Description: An illustration shows the headphones with the Multifunction Button highlighted.
Care and Maintenance
Charging Tips
The headset will automatically shut down when charging.
Diagram Description: An illustration shows the USB-C Charging Port and the LED indicator changing from red (charging) to blue (charging completed).
When the headphones are at low battery, there will be a "charge me" prompt and the red light will flash intermittently. Use the corresponding USB-C cable for charging.
The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator will turn from red to blue when charging is complete.
Storage and Maintenance
- Store the headphones in a cool, dry place. The working temperature should be 0~45°C (32~113°F). Working in a cold/hot temperature, highly humid area, or low air pressure environment may reduce the battery life.
- Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
- These headphones are water-resistant, but are not waterproof. Please do not submerge the headphones in water.
- Clean the headphones with a soft dry cloth.
- Do not charge right after exercising, in case there's sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using again.
Note: Design and specification are subject to change without notice. For the most up-to-date product information, please visit https://shokz.com.
Warning: To avoid the risk of explosion, fire, or leakage from toxic chemicals, please do not disassemble the product or replace, deform, or mutilate the battery.
Warranty
Your headphones are covered by a warranty.
Visit our website at https://shokz.com/pages/warranty-landing for details of the limited warranty.
*Failure to register will not affect your limited warranty rights.
Troubleshooting
If you have any trouble or problems, please visit https://shokz.com/pages/faq for more support!
Icon Description: A headphone icon ?.
What's in the Box
The package includes the following items:
- OpenMove Box*1
Image Description: A box labeled "OPENMOVE".
- OpenMove headphone*1
Image Description: An illustration of the Shokz OpenMove headphones.
- OpenMove Package*1
Image Description: A drawstring bag labeled "SHOKZ".
- USB-C Cable*1
Image Description: A USB-C cable.
- OpenMove User Guide*1
Image Description: A booklet labeled "User Guide".
- OpenMove Legal Statement*1
Image Description: A document labeled "Legal".
If any part of your product is damaged or missing, do not use it. Contact authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending on the sales region.
Regulatory and Legal Information
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
Responsible Party (for FCC matters only)
AfterShokz LLC.
3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758 USA
https://shokz.com
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CE Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands.
| Frequency Range | Max. Transmit Power |
|---|---|
| 2400-2483.5MHz | 1dBm(EIRP) |
[CE logo]
UK Declaration of Conformity
Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and all other applicable United Kingdom's regulations. The complete declaration of conformity can be found at: https://shokz.com/pages/policies. Shokz's authorised representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.
[UK CA logo]
WEEE Declaration of Conformity
This WEEE logo means that this product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
Compliance Marks:
- Australia/New Zealand: [Compliance checkmark logo]
- Singapore: Complies with IMDA Standards DA106614 [IMDA logo]
- Philippines: [NTC logo]
