Shokz OpenRun Pro User Guide

Shokz App

Manage multipoint pairing, upgrade firmware, change EQ modes, and more by downloading the Shokz App to easily control headphone settings. Available for limited regions. For more information, visit userguide.shokz.net/openrunpro.

Note: Apple and the Apple logo are trademarks of Apple Inc. Google Play is a trademark of Google LLC.

Headphone Controls

Components:

• Magnetic Charging Port
• LED Indicator
• Power/Volume + Button
• Volume - Button
• Multifunction Button

[Diagram description: Illustration showing the location of the magnetic charging port, LED indicator, power/volume buttons, and multifunction button on the headphones.]

ON/OFF

To turn on: Press and hold the Power/Volume + Button until the LED Indicator flashes blue. You will hear "Welcome to Shokz."

To turn off: Press and hold the Power/Volume + Button until the LED Indicator flashes red. You will hear "Power off."

Pairing

Steps:

1. Ensure the OpenRun Pro is turned off.
2. Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately. You will hear "pairing."
3. Open your device's Bluetooth settings and select "OpenRun Pro by Shokz." You will hear "connected."

[Diagram description: Illustration showing a smartphone with Bluetooth settings open, displaying "OpenRun Pro by Shokz" as connected.]

How to Wear

[Diagram description: Two-step illustration showing how to put on the headphones. Step 1: Hold the headphones. Step 2: Position the earhooks behind the neck and over the ears.]

Pick up the headphones, bring them behind the base of your neck, position the earhooks on your ears, and enjoy your music.

Note: Wearing the headphones incorrectly may cause discomfort. Ensure the transducers rest in front of your ears.

Volume

Operate volume controls while audio is playing.

To change volume: While audio is playing, adjust headphone volume by pressing the Volume + or Volume - buttons. A "beep" will sound when the volume reaches its maximum.

Warning: Listening at high volumes may affect hearing and audio quality.

[Diagram description: Close-up of the headphone's control buttons, highlighting the Power/Volume + and Volume - buttons.]

Multifunction Button

Music & Call Controls:

• Play/pause music: Click once.
• Next song: Double-click while music is playing.
• Previous song: Triple-click while music is playing.
• Answer call: Click once.
• End call: Click once.

Advanced Controls:

Note: Functions related to calls are applicable for phone calls, not online calls.

Check Battery Status

Operate controls while audio is not playing.

To check battery status: Click the Volume + or Volume - button while music is paused. Audrey will announce the battery status: "Battery high," "Battery medium," "Battery low," or "Charge me."

[Diagram description: Close-up of the headphone's control buttons, highlighting the Power/Volume + and Volume - buttons.]

EQ Modes

The headphones offer two EQ modes:

• Standard Mode: Balanced frequency for listening to music. [Icon description: Stylized ear with sound waves.]
• Vocal Booster Mode: Enhanced intermediate frequencies for audiobooks, podcasts, etc. [Icon description: Stylized mouth speaking.]

Switching EQ Modes

Operate controls while music is playing.

To switch EQ mode: Press and hold both the Power/Volume + Button and Volume - Button simultaneously while music is playing until you hear a beep. Audrey will announce "Standard Mode" or "Vocal Booster Mode." You can also use the Shokz App to change the EQ mode.

[Diagram description: Close-up of the headphone's control buttons, highlighting the Power/Volume + and Volume - buttons.]

Multipoint Pairing

Allows you to connect to two devices simultaneously.

[Diagram description: Illustration showing the Shokz OpenRun Pro headphones connecting wirelessly to a laptop and a smartphone.]

Pairing Two Devices: Switch between two devices seamlessly with multipoint pairing.

Steps to enable Multipoint Pairing:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately. (You can also use the Shokz App for easy switching between devices.)
3. Press and hold the Multifunction Button and Volume + Button until Audrey says "multipoint enabled."
4. First Device: Open your first device's Bluetooth menu and select "OpenRun Pro by Shokz." Audrey will say "connected." Turn your headphones off.
5. Second Device: Re-enter pairing mode by pressing and holding the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately. Open your second device's Bluetooth menu and select "OpenRun Pro by Shokz." Audrey will say "connected." Turn your headphones off.
6. Turn your headphones on. You will hear a beep, then Audrey will say "Welcome to Shokz, connected. Second device connected." Your headphones are now connected to both devices.

[Diagram description: Illustrations showing Bluetooth connection status on a smartphone and laptop, indicating "OpenRun Pro by Shokz" is connected.]

Turn Multipoint Pairing Off

Operate controls with headphones powered off.

Steps:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately. (You can also use the Shokz App for easy switching between devices.)
3. Press and hold the Multifunction Button and Volume - Button until Audrey says "multipoint disabled."

[Diagram description: Close-up of the headphone's control buttons, highlighting the Volume - and Multifunction buttons.]

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese, and Korean.

Steps:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately. (You can also use the Shokz App to change the language.)
3. Double-press the Multifunction Button. The language will switch, and you will hear the corresponding language announcement.

[Diagram description: Close-up of the headphone's multifunction button.]

Charging Tips

The headset will automatically shut down when charging.

[Diagram description: Illustration showing the magnetic charging cable connecting to the headphones, with two states: "Charging" (red LED) and "Charging Completed" (blue LED).]

When the headphones are low on battery, you will hear a "charge me" prompt and the red light will flash intermittently. Use the magnetic charging cable for charging. The LED indicator turns red during charging and the headphones turn off automatically. The LED indicator turns from red to blue when charging is complete.

Moisture Detection Alert

How it Works: These headphones can detect liquid such as water, sweat, or rain. If the headphones are plugged into the charger while wet, the LED indicator will flash red and blue, and the headphones will emit a beep. If this occurs, remove the charging cable, dry the headphones completely, and then proceed with charging.

[Diagram description: Close-up of the headphone's charging port area, showing water droplets and the LED indicator.]

Storage and Maintenance

• Store the headphones in a cool, dry place. Recommended working temperature: 0-45°C (32-113°F). Extreme temperatures, high humidity, or low air pressure may reduce battery life.
• Keep the product away from heat sources, direct sunlight, combustible gas, or other liquids.
• Ensure the charging port is dry before connecting the charger to prevent damage.
• The headphones are water-resistant, not waterproof. Do not submerge them in water.
• Clean the headphones with a soft, dry cloth.
• Avoid charging immediately after exercising if sweat is present in the charging port, as this could cause circuit damage.
• If stored for an extended period, charge the headphones before use.

Note: Design and specifications are subject to change without notice. For the latest product information, visit shokz.com.

Warning: To prevent risks of explosion, fire, or leakage from toxic chemicals, do not disassemble, replace, deform, or mutilate the battery.

Warranty

Your headphones are covered by a warranty. For details of the limited warranty, visit shokz.com/pages/warranty-landing.

To register your product, download the Shokz App. Failure to register will not affect your limited warranty rights.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Responsible Party (for FCC matters only)

AfterShokz LLC.
3200 Gracie Kiltz Lane, Suite 400 Austin, TX 78758 USA
shokz.com

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CE Declaration of Conformity

Shokz Holding Limited declares that this product complies with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: shokz.com/pages/policies. Shokz's EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands.

[Icon description: CE mark.]

UK Declaration of Conformity

Shokz Holding Limited declares that this product complies with the essential requirements and all other applicable United Kingdom's regulations. The complete declaration of conformity can be found at: shokz.com/pages/policies. Shokz's authorised representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.

[Icon description: UKCA mark.]

WEEE Declaration of Conformity

The WEEE logo [Icon description: WEEE symbol] indicates that this product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information on disposal and recycling, contact your local municipality, disposal service, or the shop where you bought this product.

Australia/New Zealand: [Icon description: Australian/New Zealand compliance mark.]

Singapore: Complies with IMDA Standards DA107248 [Icon description: Singapore IMDA mark.]