Shokz OpenRun Pro S810 User Guide

How It Works

Shokz App

Download the Shokz App to manage multipoint pairing, upgrade firmware, change EQ modes, and more. The app allows for easy control of headphone settings.

Available on the App Store and Google Play.

For more information, visit userguide.shokz.net/openrunpro (only for limited regions).

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play is a trademark of Google LLC.

Headphone Controls

The headphones feature a Magnetic Charging Port and an LED Indicator. Control buttons include the Power/Volume + Button, Volume - Button, and a Multifunction Button.

Diagram Description: An illustration shows the right side of the headphone. Labeled components are: Magnetic Charging Port, LED Indicator (a small light), Power/Volume + Button (with '+' and '①' symbols), Volume - Button (with '-' symbol), and Multifunction Button (a green button on the other side of the headphone).

ON/OFF

To turn on: Press and hold the Power/Volume + Button until the LED Indicator flashes blue. You will hear Audrey say, "Welcome to Shokz."

To turn off: Press and hold the Power/Volume + Button until the LED Indicator flashes red. You will hear Audrey say, "Power off."

Pairing

Steps to pair:

1. Start with OpenRun Pro turned off.
2. Press and hold the Volume + Button until the LED Indicator flashes red and blue alternately.
3. Open your device's Bluetooth settings and select "OpenRun Pro by Shokz." Audrey will say "connected."

Diagram Description: An illustration shows a smartphone with Bluetooth settings open, displaying "OpenRun Pro by Shokz" as connected. A Bluetooth symbol is also shown.

How to Wear

Pick up the headphones, bring them behind the base of your neck, position the earhooks on your ears, and then enjoy your music.

Wearing your headphones the wrong way could cause discomfort. The transducers should rest in front of your ears.

Diagram Description: A diagram illustrates the correct way to wear the headphones, showing the sequence of placing them on the head.

Volume

Operate volume controls while audio is playing.

How to change volume: While audio is playing, adjust headphone volume by pressing either the Volume + or Volume - buttons. A "beep" will sound when the volume reaches its maximum level.

⚠️ Listening with headphones at high volume may affect your hearing and the audio quality.

Diagram Description: An illustration shows the headphone controls with labels for Power/Volume + Button and Volume - Button.

Multifunction Button

The Multifunction Button controls various playback and call functions.

*Only applicable for phone calls, not online calls.

Diagram Description: An illustration shows the Multifunction Button on the headphone. Icons indicate actions like play/pause, next/previous song, and call handling.

Check Battery Status

Operate controls while audio is not playing.

How to check battery status: Click the Volume + or Volume - button while music is paused. Audrey will announce the battery status: "Battery high," "Battery medium," "Battery low," or "Charge me."

Diagram Description: An illustration shows the headphone controls with labels for Power/Volume + Button and Volume - Button.

Extra Features

EQ Modes

The headphones offer different EQ modes to suit your listening preferences.

Standard Mode: Balanced frequency for listening to music. ??

Vocal Booster Mode: Enhanced intermediate frequencies for audiobooks, podcasts, etc. ?️?

Switching EQ Modes

Operate controls while music is playing.

How to switch EQ mode: Press and hold both the Power/Volume + Button and Volume - Button simultaneously while music is playing until you hear a beep. Audrey will announce, "Standard Mode" or "Vocal Booster Mode." You can also use the Shokz App to change the EQ mode.

Diagram Description: An illustration shows the headphone controls with labels for Power/Volume + Button and Volume - Button.

Multipoint Pairing

Pair Two Devices: Switch between two devices seamlessly with multipoint pairing.

Steps to enable multipoint pairing:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the Multifunction Button and Volume + Button until Audrey says "multipoint enabled."
4. Open your first device's Bluetooth menu and select "OpenRun Pro by Shokz." Audrey will say "connected."
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
7. Open your second device's Bluetooth menu and select "OpenRun Pro by Shokz." Audrey will say "connected."
8. Turn your headphones off.
9. Turn your headphones on. You will hear a beep, then Audrey will say, "Welcome to Shokz, connected. Second device connected." Your headphones are now connected to both devices.

Diagram Description: Illustrations show the headphones, a smartphone, and a laptop, connected via Bluetooth, demonstrating multipoint pairing.

You can also use the Shokz App for easy switching between devices.

Turn Multipoint Pairing Off

Steps to turn off multipoint pairing:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
3. Press and hold the Multifunction Button and Volume - Button until Audrey says "multipoint disabled."

Diagram Description: An illustration shows the headphone controls with labels for Volume - Button and Multifunction Button.

You can also use the Shokz App for easy switching between devices.

Changing Languages

Your headphones have four built-in languages: Chinese, English, Japanese, and Korean.

Steps to change language:

1. Start with your headphones powered off.
2. Press and hold the Volume + Button until Audrey says "pairing" and the LED indicator flashes red and blue alternately.
3. Double-press the Multifunction Button. The language will switch when you hear the corresponding language announcement.

Diagram Description: An illustration shows the headphone controls with labels for Volume + Button and Multifunction Button.

You can also use the Shokz App to change the language.

Care and Maintenance

Charging Tips

The headset will automatically shut down when charging.

When the headphones are at low battery, you will hear a "charge me" prompt and the red light will flash intermittently. Use the provided magnetic charging cable.

The LED indicator will turn red during the charging process and the headphones will automatically turn off. The LED indicator turns from red to blue when charging is complete.

Diagram Description: Illustrations show the magnetic charging cable connecting to the headphone and the LED indicator changing from red (charging) to blue (charging completed).

Moisture Detection Alert

How it Works: These headphones can detect liquid such as water, sweat, or rain. If the headphones are plugged into the charger while wet, the LED indicator will flash red and blue, and the headphones will emit a beep. If this occurs, remove the charging cable, dry the headphones completely, and then proceed with charging.

Diagram Description: An illustration shows the headphone controls with water droplets indicating moisture detection.

Storage and Maintenance

• Store the headphones in a cool, dry place. The working temperature should be 0-45°C (32-113°F). Working in extreme temperatures, highly humid areas, or low air pressure environments may reduce battery life.
• Keep the product away from heat sources, direct sunlight, combustible gas, or other liquids.
• Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
• These headphones are water-resistant, but not waterproof. Do not submerge the headphones in water.
• Clean the headphones with a soft, dry cloth.
• Do not charge immediately after exercising if sweat is present in the charging port, as this could lead to circuit damage during charging.
• After a long period of storage, please charge the headphones before using them again.

Note: Design and specifications are subject to change without notice. For the most up-to-date product information, please visit shokz.com.

Warning: ⚠️ To avoid the risk of explosion, fire, or leakage from toxic chemicals, please do not disassemble the product or replace, deform, or mutilate the battery.

Warranty

Your headphones are covered by a warranty. Visit shokz.com/pages/warranty-landing for details of the limited warranty.

To register your product, download the Shokz App. Failure to register will not affect your limited warranty rights.

Troubleshooting

If you encounter any trouble or problems, please visit shokz.com/pages/faq for more support.

Icon Description: A headphone icon is shown next to the support link.

What's in the Box

The package typically includes:

• OpenRun Pro Box
• OpenRun Pro headphones
• OpenRun Pro Package
• OpenRun Pro User Guide
• OpenRun Pro Legal Statement
• OpenRun Pro App Card
• Magnetic Charging Cable

If any part of your product is damaged or missing, do not use it. Contact an authorized Shokz dealer or Shokz customer service.

Please note that the packaging envelope may vary depending on the sales region.

Diagram Description: Illustrations show the OpenRun Pro Box, headphones, and package. Below these are illustrations for the User Guide, Legal Statement, Shokz App, and Magnetic Charging Cable.

Regulatory and Legal Information

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Industry Canada

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following Two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CE Declaration of Conformity

Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU Directive requirements. The complete declaration of conformity can be found at: shokz.com/pages/policies. Shokz's EU representative is AfterShokz Euro B.V., Schipholweg 103, 2316XC Leiden, Netherlands.

Frequency Range: 2400-2483.5MHz, Max. Transmit Power: 10dBm(EIRP). CE

UK Declaration of Conformity

Shokz Holding Limited hereby declares that this product is in compliance with the essential requirements and all other applicable United Kingdom's regulations. The complete declaration of conformity can be found at: shokz.com/pages/policies. Shokz's authorised representative in the UK is Pinpoint Consumer Electronics Ltd., Unit 35, Meridian House, Road One, Winsford Industrial Estate, Winsford, Cheshire CW7 3QG.

UKCA

WEEE Declaration of Conformity

This WEEE logo ♻️ means that this product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health, and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Australia/New Zealand Compliance: [Compliance Mark]

Singapore Compliance: Complies with IMDA Standards DA107248