Yaheetech Raised Garden Bed Assembly Manual

Model Number: 611469

Please read this instruction manual carefully before attempting to install.

Important Assembly Information

General Recommendations:

• People Required: 2 or more people recommended for installation. ?
• Estimated Assembly Time: 1 hour. ⏰
• Child Safety: Not intended for use by children. ? ❌
• Heat Safety: Keep away from fire or other heat sources. ? ❌
• Protective Gear: Wearing protective gloves is recommended. ?

Assembly Tip:

Use a pad or protective covering on your floor and the product during assembly to avoid damage.

Tightening Procedure:

During assembly, first half-tighten all screws. After all screws are in place, fully tighten them.

Parts List

Identify all parts before beginning assembly:

• Part 1: Left Vertical Support Post (x2)
• Part 2: Right Vertical Support Post (x2)
• Part 3: Lower Shelf Support Brace (x1)
• Part 4: Side Panel / Lower Shelf Support (x2)
• Part 5: Main Top Panel (x1)
• Part 6: Horizontal Support Bar (x2)
• Part 7: Middle Shelf Panel (x2)
• Part 8: Horizontal Support Bar (x2)
• Part 9: Bottom Shelf Support Bar (x2)
• Part 10: Bottom Shelf Slats (x11)
• Part 11: Foldable Side Table Top (x1)
• Part 12: Side Table Support Arms (x3)
• Part 13: Storage Tray/Drawer (x1)

Hardware:

• Hardware A: Screws (40mm) (x24)
• Hardware B: Screws (30mm) (x8)
• Hardware C: Bolts (85mm) (x4)
• Hardware D: Bolts (80mm) (x4)
• Hardware E: Screws (25mm) (x44)

Assembly Steps

Step 1:

Attach the Lower Shelf Support Brace (Part 3) to the inner sides of two Vertical Support Posts (Parts 1 and 2) using 6x Hardware A (40mm screws).

Step 2:

Attach the Side Panels/Lower Shelf Supports (Part 4) to the lower section of the assembled posts using 8x Hardware B (30mm screws) and 2x Hardware C (85mm bolts).

Step 3:

Attach Horizontal Support Bars (Parts 6 and 8) and Middle Shelf Panels (Part 7) to the vertical posts using 6x Hardware A (40mm screws). Attach Bottom Shelf Support Bars (Part 9) to the vertical posts.

Step 4:

Secure the Main Top Panel (Part 5) to the top of the vertical posts using 2x Hardware C (85mm bolts).

Step 5:

Attach the remaining two Vertical Support Posts (Parts 1 and 2) to the base structure using 12x Hardware A (40mm screws).

Step 6:

Assemble the bottom shelf by attaching the Bottom Shelf Slats (Part 10) to the Bottom Shelf Support Bars (Part 9) using 44x Hardware E (25mm screws).

Step 7:

Insert the assembled bottom shelf into the main frame and secure it using 4x Hardware D (80mm bolts).

Step 8:

Slide the Storage Tray/Drawer (Part 13) into its designated slot.

Step 9:

Attach the Side Table Support Arms (Part 12) and the Foldable Side Table Top (Part 11) to the main structure.

Step 10: Side Table Extension

The side table can be extended. Follow the visual indicators (NO.1, NO.2) to slide and lock the table into place.

Customer Support

If you are not entirely satisfied with your purchase, please contact Yaheetech customer service:

Steps to Contact Support:

• Go to "Your Orders".
• Find your order in the list.
• Select "Problem with order".
• Choose your topic from the displayed list.
• Select "Contact seller".

The electronic Installation Manual can also be downloaded from the product guides and documents section of the advertising page.

Manufacturer Information: Made in PRC for Yahee GmbH. Importer: Yahee GmbH, Hans-Grüninger-Weg 11, 71706 Markgröningen.