Yaheetech Raised Garden Bed Assembly Instructions

Important Information

General Guidance:

• We recommend 2 or more people to install.
• The expected assembly time is 1 hour.
• Not intended for use by children.
• Keep away from fire or other heat sources.
• We recommend wearing protective gloves [gloves emoji].

Assembly Precautions:

Please follow the instruction manuals and use a pad to avoid damage during assembly. Ensure the product and the floor are protected during installation.

Parts List

Please identify all parts before beginning assembly:

• ① Left Side Panel (x2)
• ② Right Side Panel (x2)
• ③ Front/Back Panel (x2)
• ④ Side Rail (x2)
• ⑤ Corner Brace (x4)
• ⑥ Support Rail (x4)
• ⑦ Top Cap (x4)
• ⑧ Top Board (x4)
• ⑨ Long Support Bar (x2)
• ⑩ Slat (x10)
• ⑪ Inner Tray (x1)
• ⑫ Top Frame (x1)
• ⑬ Support Rod (x3)
• A Screw (x8)
• B Screw (x24)
• C Screw (x4)
• D Screw (x40)
• E Gloves (x1)

Assembly Steps

Step 1

Attach side panels (1) and (2) to the front/back panels (3) using screws (A). Ensure panels are aligned correctly.

Step 2

Continue attaching side panels (1) and (2) to the front/back panels (3) using screws (A).

Step 3

Assemble the slatted base. Attach the slats (10) to the support rails (9) using screws (D). Ensure 10 slats are used per support rail.

Step 4

Connect the assembled base to the side panels. Initially, half-tighten all screws (C) and (D). Fully tighten all screws once all parts are in place.

Step 5

Attach the corner braces (5) and support rails (6) to the structure using screws (B). Refer to the diagrams for precise placement.

Step 6

Attach the top caps (7) to the corner posts using screws (B). Ensure they are securely fastened.

Step 7

Place the top boards (8) onto the top frame, aligning them correctly.

Step 8

Insert the inner tray (11) into the top section of the garden bed.

Step 9

Attach the top frame (12) and support rods (13) to the top of the garden bed using the provided hardware.

Step 10

Final check of all connections. Ensure all screws are tightened securely.

Customer Support

If you are not entirely satisfied with your purchase, please contact Yaheetech customer support. Follow these steps:

1. Go to Your Orders.
2. Find your order in the list.
3. Select "Problem with order".
4. Choose your topic from the displayed list.
5. Select "Contact seller".

The product was manufactured in the PRC. The importer is Yahee GmbH, Hans-Grüninger-Weg 11, 71706 Markgröningen.

You can also download the electronic Installation Manual from the product guides and documents section of the advertising page.