Yaheetech 592332 Wooden Potting Bench with Sliding Tabletop
Assembly Instructions
Important Information & Safety Guidelines
- Recommended: 2 or more people for installation. ???
- Estimated assembly time: 1 hour. ⏰
- Warning: Not intended for use by children. ?❌
- Warning: Keep away from fire or other heat sources. ?❌
- Recommendation: Wear protective gloves during assembly. ?
Assembly Preparation
- Please follow the instruction manuals and use a pad to avoid damage during assembly. ❌
Parts List
| Part Number | Description | Quantity |
|---|---|---|
| 1 | Side Panel | x1 |
| 2 | Side Panel | x1 |
| 3 | Top Shelf Support | x1 |
| 4 | Lattice Panel | x1 |
| 5 | Shelf Support | x1 |
| 6 | Shelf Support | x1 |
| 7 | Long Shelf | x1 |
| 8 | Leg | x4 |
| 9 | Slat Shelf | x1 |
| 10 | Drawer/Tray Unit | x1 |
| 11 | Small Tray | x1 |
| 12 | Slat Panel | x1 |
| 13 | Slat Panel | x1 |
Hardware
| Hardware ID | Description | Quantity |
|---|---|---|
| A | Screw (30mm) | x8 |
| B | Screw (30mm) | x4 |
| C | Screw (34mm) | x10 |
| D | Screw (65mm) | x4 |
| E | Screw (70mm) | x4 |
| F | Screw (70mm) | x4 |
Assembly Steps
-
Step 1
Attach Part 3 (Top Shelf Support) and Part 4 (Lattice Panel) to Part 1 (Side Panel) using screws (A). Ensure correct orientation of parts 3 and 4.
-
Step 2
Attach Part 2 (Side Panel) to the assembly from Step 1, securing Parts 3 and 4 with screws (A). This forms the basic frame with the lattice panel.
-
Step 3
Attach Part 5 and Part 6 (Shelf Supports) to the inner sides of Parts 1 and 2 using screws (B). Then, attach Part 7 (Long Shelf) to the shelf supports using screws (B).
-
Step 4
Secure the Lattice Panel (Part 4) to the side panels (Parts 1 and 2) from the outside using screws (C).
-
Step 5
Attach the four Legs (Part 8) to the bottom corners of the structure using screws (D). Then, attach the Slat Shelf (Part 9) to the legs using screws (D).
-
Step 6
Attach the Drawer/Tray Unit (Part 10) to the main frame of the potting bench using screws (E) and screws (F).
-
Step 7
Add additional support and stability to the Drawer/Tray Unit (Part 10) by securing it with screws (C).
-
Step 8
Insert the Small Tray (Part 11) into the designated compartment within the Drawer/Tray Unit (Part 10).
-
Step 9
Place and secure the two Slat Panels (Part 12 and Part 13) onto the top surface of the potting bench.
Customer Support
If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech. Follow these steps:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
You can also download the electronic Installation Manual from the "Product guides and documents" section of the advertising page.
