Yaheetech 591957 Garden Bench Assembly Instructions
Important Information
Assembly Requirements
??? We recommend 1 or more people to install.
Assembly Time
⏱️ The expected assembly time is 0.5 hours.
Safety Warnings
?? Not intended for use by children.
?? Keep away from fire or other heat sources.
? We recommend wearing protective gloves.
Assembly Preparation
⚠️ Please follow the instruction manuals and use a pad to avoid damage during assembly.
Diagram: Illustrates proper unpacking and assembly preparation. It shows a character placing a box labeled 'CARTON' near a trash bin with a red cross (❌) symbol, advising against discarding parts. The character then opens the box and places a protective pad on the floor before arranging product parts on it, indicated by a green checkmark (✔️) symbol.
Parts List
| Label | Description | Quantity |
|---|---|---|
| A | Bench Seat Base | x1 |
| B | Leg/Support | x4 |
| C | Backrest | x1 |
| D | Decorative Element | x1 |
| E | Decorative Element | x1 |
| F | M8*30mm Screw | x8 |
| G | M6*35mm Screw | x9 |
| H | M6 Screw | x9 |
| I | M6 Washer | x9 |
| J | M6 Nut | x9 |
| K | M8 Washer | x8 |
| L | M8 Washer | x8 |
| M | M8 Nut | x8 |
| N | M6 Nut | x2 |
| O | Allen Wrench | x1 |
Assembly Steps
Step 1: Attach Seat Base
Attach part A (Bench Seat Base) using eight part F (M8*30mm Screws). Use the provided Allen wrench (O) for tightening.
Diagram: Shows part A being attached using eight screws (F). A circular arrow indicates the tightening action with a tool.
Step 2: Attach Legs
Attach four parts B (Legs/Supports) to the bench seat base (A). For each leg, use one part F (M8*30mm Screw), one part K (M8 Washer), one part L (M8 Washer), and one part M (M8 Nut). The order is: screw, leg, washer K, washer L, nut M.
Diagram: Details attaching the four legs (B) to the bench seat base (A). A close-up shows the assembly order: screw (F) through leg (B), then washers (K, L), secured by nut (M).
Step 3: Attach Backrest and Supports
Attach part C (Backrest) and parts G (M6 Screws) and H (M6 Screws) with parts I (M6 Washers) and J (M6 Nuts). It is recommended to half-tighten all screws first, then fully tighten them once all are in place.
Diagram: Depicts attaching the backrest (C) and side supports (G, H) to the main assembly. Screws (G, H) are inserted with washers (I) and fastened with nuts (J). The diagram shows the placement of these components.
Step 4: Final Assembly and Tightening
Attach remaining decorative elements and supports using parts D, E, G, H, J, and N. Ensure all screws are fully tightened as per the instructions in Step 3.
Diagram: Illustrates the final assembly, attaching decorative elements (D, E) and securing the structure with screws (G, H) and nuts (J, N). The complete bench is shown with all parts in place.
Customer Support
If you are not entirely satisfied with your purchase, please feel free to contact us:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the list displayed.
- Select "Contact seller".
The product was manufactured in the People's Republic of China (PRC).
Importer: Yahee GmbH, Hans-Grüninger-Weg 11, 71706 Markgröningen.
You can also download the electronic Installation Manual from the 'Product guides and documents' section of the advertising page.
