Yaheetech 592716 Assembly Instructions
Model: 592716
Important Information & Safety
Assembly Recommendation: We recommend 1 or more people to install.
Estimated Assembly Time: 1 hour.
Warnings:
- Not intended for use by children. ?
- Keep away from fire or other heat sources. ?
- We recommend wearing protective gloves. ?
Assembly Tip: Please follow the instruction manuals and use a pad to avoid damage during assembly.
Parts List
- Part 1 (x2): Frame piece
- Part 2 (x2): Base piece
- Part 3 (x4): Side panel
- Part 4 (x2): Top frame
- Part 5 (x2): Lid panel
- Part 6 (x2): Container box
- Part 7 (x2): Cushion
- Fastener A (x8): Screw
- Fastener B (x32): Screw (30mm)
- Fastener C (x24): Washer
- Fastener D (x8): Block/Spacer
- Fastener E (x2): Allen Key
- Fastener F (x8): Screw (35mm)
Assembly Steps
Note: The following steps are for assembling one unit. Repeat for the second unit.
Step 1: Attach Side Panels to Base
Connect two side panels (3) to the base panel (2) using four screws (B) and four washers (C) per connection. Ensure screws are half-tightened.
Diagram shows two side panels being attached to a base panel with screws and washers.
Step 2: Attach Top Frame
Attach the top frame (4) to the upper edges of the side panels (3) using two screws (F) and two washers (C) per side. Ensure screws are half-tightened.
Diagram shows the top frame being attached to the side panels with screws and washers.
Step 3: Connect Remaining Side Panels
Connect the remaining side panels (1) to the base (2) and top frame (3) using screws (B) and washers (C) for the base, and screws (F) and washers (C) for the top. Ensure panels (1) and (2) are positioned slightly higher than panel (3). Half-tighten all screws.
Diagram shows the final side panels being attached, with a note about panel height alignment.
Step 4: Attach Support Blocks
Attach the blocks (D) to the designated points on the top of the assembled structure using screws (B). Two blocks (D) are attached with four screws (B) each.
Diagram shows blocks being attached to the top corners of the frame with screws.
Step 5: Attach Lid Panels
Attach the lid panels (5) to the main body using screws (A). After all screws are in place, tighten them completely.
Diagram shows the lid panels being attached to the main body with screws.
Step 6: Insert Container Box
Place the container box (6) inside the assembled frame.
Diagram shows the inner box being placed into the assembled unit.
Step 7: Secure Cushion
Secure the cushion (7) onto the lid using the provided straps.
Diagram shows the cushion being attached to the lid with straps.
Maintenance and Care
Velvet Care
Vacuum your piece monthly to keep the velvet looking like new. Use a nylon brush to remove any dirt or food. Contact a professional annually for a deep clean.
Stubborn Stains
Blot stains with a damp cloth and a dash of dish soap. Wipe away excess water with a clean towel. Let the material air-dry fully before use.
Additional Tips
Vacuum to remove any loose crumbs or dirt. If you have a pet, use a lint roller to gather up any fur.
Preventative Care
Rotate pillows and cushions monthly to ensure even wear. Avoid placing your piece in direct sunlight to prevent fading. Add a slipcover; most are machine-washable and can change up your style!
Contact Information
If you are not entirely satisfied with your purchase, please feel free to contact us using the following steps:
- Go to Your Orders.
- Find your order in the list.
- Select Problem with order.
- Choose your topic from the list displayed.
- Select Contact seller.
US Contact:
YAHEE TECHNOLOGIES CORP
Address: 1532 S VINEYARD AVE ONTARIO CA 91761
UK Contact:
Monumart Limited
Address: Europa House, Europa Way, IP15DL, Ipswich.
Germany Contact:
Yahee GmbH
Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen
France Contact:
Yahee SAS
Adresse: 6, Place de la Madeleine, 75008 Paris.
Italy Contact:
Yahee SRL
Indirizzo: Via Generale Gustavo Fara, 26, 20124 Milano.
Download Manual
You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.