VIGO Cass 2-Handle Wall Mount Bathroom Faucet
Model Number: VG05007
Product Features
- PerformanceSpout: Eco-friendly 1.2 GPM and WaterSense certified spout conserves water without sacrificing performance.
- EternalSeal: Ceramic disc cartridge continually prevents leaks and drips for flawless water flow.
- FinishPlated: 7-layer coated finish ensures that the hardware finish is consistent throughout the product.
- 3-hole installation: all parts, hardware and user-friendly instructions are included.
- Easy to install: All parts, hardware and user-friendly guide are included for DIY installation.
- Eco-friendly: water efficient faucet conserves water and is environmentally friendly for all homes.
Certificates & Warranty
CUPC, NSF-61, NSF 372, AB1953, CEC, and WaterSense certified by IAPMO R&T. All VIGO Bathroom Faucets have a Limited Lifetime Warranty.
Certifications: CUPC, NSF/ANSI 61, UPC, WaterSense, LEAD FREE
Parts List
| Part Number | Description (English) | Description (Spanish) | Description (French) |
|---|---|---|---|
| 68091 | Valve Housing | Carcasa de la válvula | Boîtier de vanne |
| 68185-H | Spout Adapter Assembly (Hot) | Conjunto de adaptador de boquilla (caliente) | Ensemble adaptateur de bec (chaud) |
| 68185-C | Spout Adapter Assembly (Cold) | Conjunto de adaptador de boquilla (frío) | Ensemble adaptateur de bec (froid) |
| 68182 | Handle Escutcheon | Escudo de la manija | Écusson de poignée |
| 68184-H | Handle Assembly (Hot) | Ensamblaje de manija (caliente) | Ensemble de poignée (chaud) |
| 68184-C | Handle Assembly (Cold) | Ensamblaje de manija (frío) | Ensemble de poignée (froid) |
| 68183 | Spout Assembly | Ensamblaje del pico | Ensemble de bec |
| 64042 | Aerator Washer | Lavadora de aireador | Rondelle d'aérateur |
| 64043 | Aerator | Aireador | Aérateur |
| 68164 | Outlet Sleeve | Manga de salida | Manchon de sortie |
Installation Steps
-
STEP 1.1: Preparation
- Shut off water supply.
- Remove old faucet and flexible hoses.
- Clean sink surface in preparation for the new faucet.
- Flush water connection at home to make sure no debris is stuck in the line.
-
STEP 1.2: Measurement & Placement
- Draw a simple diagram on the wall to determine the exact location for the faucet's placement.
-
STEP 1.3: Preparation & Connection
- Use plumber's tape around the threaded fitting to secure the seal.
- Connect braided hoses to the proprietary brass fitting.
-
STEP 1.4: Wall Placement & Alignment
- Finalize measurements, making sure the dimensions are correct and ready for the next steps.
-
STEP 1.5: Install New Faucet
- Remove the protective tops covering the hardware below.
-
STEP 1.6: Handles & Spout
- Place the handles and spout firmly into position within their respective circular housings.
-
STEP 1.7: Sealed for Quality
- Use plumber's tape to cover the threaded fitting, guaranteeing an efficient and long-lasting seal.
-
STEP 1.8: Putting It Together
- Attach the assembled handles and spout directly to the exposed valves.
-
STEP 1.9: Final Check
- Make sure that all fittings and lines are properly connected and tightly fastened before turning on water valves.
-
STEP 1.10: Open the water lines
- Wrap tape on cold and hot pipe threads.
- Place the hose.
- Screw the hoses onto cold and hot threads.
- Open cold and hot water lines.
Safety Tips
Installation must be done by a qualified licensed plumber. Prior to installation please read the instructions thoroughly, confirm that all parts are included and visually inspect the unit for any defects. If you have any questions please contact the VIGO Technical Support Department before proceeding with installation.
If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed before using flame. Damage caused by improper soldering will void the warranty. Protect your eyes with safety glasses when cutting or soldering water supply lines.
WARNING: This product can expose you to lead, a chemical known to the State of California to cause cancer and reproductive harm. For more information, visit: www.P65Warnings.ca.gov
Contact & Support
For installation help, missing or replacement parts, please contact our product specialist for consultation.
VIGO Product Support: (866) 591-7792 (Option 2) Monday - Friday 9:30am - 5:30pm EST
Email: sf@vigoindustries.com
Website: vigoindustries.com
