VIGO ELAN Adjustable Frameless Sliding Shower Door
Model Number: VG6041
Product Features
- Built-in horizontal adjustability for easy installation.
- Includes all necessary mounting hardware.
- Constructed from ANSI Z97.1 and 16 CFR 1201-certified tempered glass for safety.
- RollerDisk™ Technology allows for up to 3/8" of adjustability as walls shift over time.
- High-quality stainless steel and solid brass hardware resist corrosion and tarnishing.
- Backed by VIGO's Limited Lifetime Warranty.
Product Registration & Warranty
Register your product to activate your warranty. Visit vigoindustries.com/register.
VIGO reserves the right to modify or update hardware and glass components to improve user experience. For questions, contact VIGO Tech Support at 1-866-591-7792.
Safety Precautions
WARNING: Instructions that, if ignored, could result in death or serious personal injury. Always observe instructions indicated by these symbols for safe installation.
IMPORTANT: Maintenance and other important non-personal injury and non-material damage instructions or statements that should be observed.
It is highly advised to dry fit the unit prior to any installation.
Parts List
A comprehensive list of parts is provided with corresponding diagrams and part numbers for clear identification.
Dimensions
Detailed dimensions (A, B, C) are provided for various models, indicating door and fixed panel sizes, adjustable width, height, and door opening width.
Required Tools: Square and/or Phillips screwdriver (#1, #2), Flat head screwdriver, Electric drill with appropriate drill bits, Level, Measuring tape, Clear silicone caulking, Utility knife, Hacksaw.
Important Notes: Handle fragile items with care. Tempered glass panels cannot be cut. Always rest glass on a level surface. Ensure sufficient structural support behind shower walls. Fiberglass, acrylic, or sheetrock construction may require reinforcement with wood framing. Install the shower door perfectly level to prevent leaks.
Installation Steps
The manual provides detailed, step-by-step instructions for installation, categorized into sections:
- A. Installing the structural rail
- B. Installing the fixed panel
- C. Installing the door panel
- D. Installing threshold
- E. Installing the handle
- F. Installing the water seal strip
- G. Applying the silicone
Each step includes diagrams and specific part references for clarity. Special attention is given to roller adjustments for out-of-square openings, with detailed diagrams illustrating different wall conditions (straight, top angled, bottom angled).
Contact Information
For assistance, contact VIGO Product Support at (866) 591-7792 (Option 2), Monday - Friday, 9:30 am - 5:30 pm EST. Visit vigoindustries.com for more information or instructional videos.
