VIGO Mateo Shower Massage Panel Installation Manual

Product Features

• Hydrotherapy revitalization through pressurized water massage jets
• 6 fully adjustable body spray massage jets
• Great water pressure with 60 psi
• Pre-plumbed panel can be easily installed on flat walls or in corners
• Easy to install with standard 1/2" plumbing connection
• Eco-friendly 2.5 gpm flow rate without sacrificing performance

Certifications

CUPC certified by IAPMO

Packing List

• Shower panel
• Hand shower
• Hand shower hose
• Supply lines
• Mounting hardware

Tools Required

• Tape Measure
• Pencil
• Soft Cleaning Rag
• Ear Protection
• Eye Protection
• Safety Gloves

Product Registration

Register your product to activate your warranty. Visit vigoindustries.com/register.

Questions?

For installation help, missing or replacement parts, please contact VIGO Product Support at 1-866-591-7792 (Option 2) or email support@vigoindustries.com.

Dimensions

Front View:

Height: 59 15/16" (1523mm)

Width: 7" (178mm)

Depth: 20 1/2" (521mm)

Side View:

Height: 59 15/16" (1523mm)

Width: 8 1/4" (210mm)

Depth: 20 1/2" (521mm)

Top View:

Dimensions are shown in the diagrams.

Flow Rate: 2.5 gpm

Installation Instructions

Flat Installation

1. Place shower panel against the wall at the desired height. Position shower head at least 150mm higher than your height.
2. Mark the wall at the bottom of each bracket attached to the shower panel.
3. Place wall mount bracket on the wall using the markings, aligning them just above the outward bend in the bracket. Mark hole locations for drilling.
4. Ensure water lines from the wall are located at the correct distance from the bottom of the shower panel to fit hoses in the rear.
5. Drill 15/64" diameter holes into the wall at the desired height. Insert anchors into the drilled holes. Screw wall mount brackets to the wall.
6. Connect hot and cold supply hoses to the water source coming from the wall.
7. Ensure all connections are secure. Test for leaks before securing the shower panel to the wall.
8. Place the shower panel onto the wall, aligning the rear brackets with the wall mount brackets, and slide downward to secure.
9. Ensure supply line connections are outside the wall, behind the shower panel.
10. Connect the hand shower hose to the shower panel, ensuring the washer is in place.
11. Connect the other side of the hand shower hose to the hand shower, ensuring the screen is in place.
12. Install the hand shower bracket to the wall in the desired location.

Corner Installation

1. Place shower panel against the wall at the desired height. Position shower head at least 150mm higher than your height.
2. Mark the wall at the bottom of each bracket attached to the shower panel.
3. Place wall mount bracket on the wall using the markings, aligning them just above the outward bend in the bracket. Mark hole locations for drilling.
4. Ensure water lines from the wall are located at the correct distance from the bottom of the shower panel to fit hoses in the rear.
5. Drill 15/64" diameter holes into the wall at the desired height. Insert anchors into the drilled holes. Screw wall mount brackets to the wall.
6. Connect hot and cold supply hoses to the water source coming from the wall.
7. Ensure all connections are secure. Test for leaks before securing the shower panel to the wall.
8. Place the shower panel onto the wall, aligning the rear brackets with the wall mount brackets, and slide downward to secure.
9. Ensure supply line connections are outside the wall, behind the shower panel.
10. Connect the hand shower hose to the shower panel, ensuring the washer is in place.
11. Connect the other side of the hand shower hose to the hand shower, ensuring the screen is in place.
12. Install the hand shower bracket to the wall in the desired location.

Limited Lifetime Warranty

VIGO INDUSTRIES, LLC offers a limited lifetime warranty on its SHOWER PANEL Products. The warranty covers mechanical components for five (5) years and the finish for three (3) years from the original date of purchase for personal household use. This warranty is non-transferable. It does not cover products used for commercial purposes, sold as-is, closeouts, or purchased through unauthorized dealers. Limitations include damages from improper installation, misuse, or lack of maintenance. For full details and to make a warranty claim, please contact VIGO Product Support.

Cleaning Recommendations

To avoid damage and reclamations, avoid abrasive materials when cleaning VIGO products. Use mild cleaners and rinse thoroughly with clean water. A 50/50 water and vinegar solution is recommended for hard water and soap scum.

Do Not Use: Hydrochloric acid, formic acid, acetic acid, phosphoric acid, abrasive cleaners, scouring pads, or microfiber cloths.