Tribesigns HOGA-F2228 Locker Assembly Instructions

Model Number: HOGA-F2228

Brand: Tribesigns

Contact Us

We're here to help you.

Email: support@tribesigns.com

Phone: 1-424-220-6888 (Contact us from 7 AM to 8 PM EST, Monday to Friday)

Your satisfaction is our top priority. If you encounter any issues with this product, such as missing or damaged parts, please retain the original packaging and take photos of the packaging and the product, then contact us as soon as possible.

Warm Tips

Carefully read these instructions and keep them for future reference.
Check the parts list and confirm everything's there before starting assembly.
When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

How to Get the Assembly Video

Step 1: Scan the QR code [QR Code] for the installation video.

Step 2: Alternatively, search with the Model No. (HOGA-F2228) on platforms like YouTube.

Note: If you can't find the assembly video, please contact customer service.

Tool Recommendations & Safety

We recommend using hand tools for assembly. If an electric screwdriver is used, reduce power and torque to avoid damage to the product. ⚠️

Install the Anti-Tip Straps

Using the anti-tip straps can reduce the risk of tipping over, but can not eliminate it. Ensure the unit is securely fastened to the wall for safety.

[Diagram Description: Shows the correct installation of anti-tip straps, securing the unit to the wall, and an incorrect scenario where the unit is tipping over.]

Parts List

Part #	Description	Quantity
1	Base Panel	2 pcs
2	Side Panel Base	2 pcs
3	Bottom Panel	1 pc
4	Side Panel	2 pcs
5	Side Panel	2 pcs
6	Shelf Panel	4 pcs
7	Back Panel	1 pc
8	Side Panel	2 pcs
9	Top Panel	1 pc
10	Shelf Panel	2 pcs
11	Decorative Door Panel	2 pcs
12	Decorative Door Panel	2 pcs

Hardware List

Label	Description	Quantity
A	M6x35mm Screw	36 pcs
B	Ø15x12mm Cam Lock	40 pcs
C	Ø8x30mm Screw	12 pcs
D	M6x35mm Screw	4 pcs
E	Ø3.5x14mm Screw	8 pcs
F	Nail/Pin	8 pcs
G	Ø4x25mm Screw	8 pcs
H	96mm Connector Bracket	4 pcs
I	Cam Pin	8 pcs
J	Cam Lock	8 pcs
K	Hinge Component	8 pcs
L	Wall Anchor Strap	1 pc

Assembly Steps

Step 1: Attach Base Panels

Attach part 1 to part 2 using hardware A (M6x35mm screws, 8 pcs). Repeat for the second set of part 1 and 2.

[Diagram Description: Shows attaching part 1 to part 2 using screws A.]

Step 2: Secure Base Components

Connect part 1 to part 2 using hardware B (Ø15x12mm cam locks, 8 pcs).

[Diagram Description: Shows connecting part 1 to part 2 using cam locks B, illustrating the tightening action.]

Step 3: Assemble Base Frame

Attach part 2 to part 3 using hardware B (Ø15x12mm cam locks, 4 pcs). Then, attach part 1 to part 3 using hardware B (Ø15x12mm cam locks, 4 pcs).

[Diagram Description: Shows attaching part 2 and part 1 to part 3 using cam locks B to form the base structure.]

Step 4: Secure Bottom Panel and Prepare Shelf

Secure the bottom panel (part 3) with nails/pins (F, 8 pcs). Then, prepare another part 3 by rotating it 180 degrees and inserting screws (A, 6 pcs).

[Diagram Description: Shows securing part 3 with nails F and preparing another part 3 with screws A.]

Step 5: Attach Side Panels to Base

Attach side panels 4 and 5 to the base structure using cam locks (B, 6 pcs) and screws (C, 2 pcs).

[Diagram Description: Shows attaching side panels 4 and 5 to the base using cam locks B and screws C.]

Step 6: Install Shelf Panels

Insert shelf panels (6) into the grooves on the side panels 4 and 5.

[Diagram Description: Shows sliding shelf panels 6 into the side panels.]

Step 7: Attach Back Panel

Attach the back panel (7) to the rear of the unit using screws (A, 4 pcs) and (D, 2 pcs).

[Diagram Description: Shows placing back panel 7 and securing it with screws A and D.]

Step 8: Attach Top Panel

Attach the top panel (9) to the unit using cam locks (B, 6 pcs) and screws (C, 2 pcs).

[Diagram Description: Shows attaching top panel 9 using cam locks B and screws C.]

Step 9: Attach Main Side Panels

Attach side panels (7) to the unit using screws (A, 4 pcs) and (D, 2 pcs).

[Diagram Description: Shows attaching side panels 7 to the unit using screws A and D.]

Step 10: Attach Other Main Side Panels

Attach side panels (8) to the unit using cam locks (B, 6 pcs) and screws (C, 4 pcs).

[Diagram Description: Shows attaching side panels 8 to the unit using cam locks B and screws C.]

Step 11: Install Vertical Dividers

Insert vertical divider panels (6) into the designated slots.

[Diagram Description: Shows inserting vertical divider panels 6.]

Step 12: Prepare Top Panel for Shelves

Insert screws (A, 6 pcs) into the top panel (9).

[Diagram Description: Shows inserting screws A into top panel 9.]

Step 13: Attach Top Panel

Attach the top panel (9) to the unit using cam locks (B, 6 pcs) and screws (C, 4 pcs).

[Diagram Description: Shows attaching top panel 9 using cam locks B and screws C.]

Step 14: Install Shelf Supports

Insert shelf supports (I, 8 pcs) into the pre-drilled holes on the inner side panels.

[Diagram Description: Shows inserting shelf supports I into the inner side panels.]

Step 15: Install Shelves

Place shelf panels (10) onto the installed shelf supports.

[Diagram Description: Shows placing shelf panels 10 onto the supports.]

Step 16: Attach Hinges to Side Panels

Attach hinge components (K, 4 pcs) and connector brackets (H, 2 pcs) to the side panels (11) using screws (E, 8 pcs) and (G, 4 pcs). Repeat for the second side panel (x2).

[Diagram Description: Shows attaching hinges K and connector brackets H to side panel 11 using screws E and G.]

Step 17: Attach Hinges to Door Panels

Attach hinge components (K, 4 pcs) and connector brackets (H, 2 pcs) to the decorative door panels (12) using screws (E, 8 pcs) and (G, 4 pcs). Repeat for the second door panel (x2).

[Diagram Description: Shows attaching hinges K and connector brackets H to decorative door panel 12 using screws E and G.]

Step 18: Install Doors

Attach the doors to the main unit using the hinges. Secure hinges with screws (E, 32 pcs total).

[Diagram Description: Shows attaching the doors to the main cabinet structure, highlighting the use of screws E for hinges.]

Step 19: Attach Door Handles

Attach door handles using hardware J (8 pcs) and E (8 pcs).

[Diagram Description: Shows attaching door handles using hardware J and E.]

Step 20: Attach Wall Anchor Strap to Unit

Attach the wall anchor strap (L, 1 pc) to the top of the unit.

[Diagram Description: Shows attaching the wall anchor strap L to the top rear of the unit.]

Step 21: Secure Unit to Wall

Secure the unit to the wall using the wall anchor strap (L) for safety.

[Diagram Description: Shows the process of securing the unit to the wall using the anchor strap L.]

Adjust Your Doors (Optional)

These steps are optional for making door gaps more even.

Step 1: Open the door.

[Diagram Description: Shows an open door relative to the side and top panels.]

Step 2: Adjust Door Flushness

Adjust the door panel to be flush with the side panel and top panel edge. Loosen the indicated screw slightly, adjust the hinge position (move door in/out), and then retighten the screw.

[Diagram Description: Shows adjusting the door's forward/backward position by manipulating the hinge screws.]

Step 3: Adjust Door Gaps

Adjust the gap between the door panel and the side panel. Loosen the indicated screw slightly, adjust the hinge position (move door left/right), and then retighten the screw.

To make the gap smaller: Turn the screw clockwise.

To make the gap bigger: Turn the screw counterclockwise.

[Diagram Description: Shows adjusting the door's left/right position by manipulating the hinge screws.]

	Tribesigns HOGA-J0306/J0382 Cabinet Assembly Instructions Comprehensive assembly guide for the Tribesigns HOGA-J0306/J0382 cabinet, detailing parts, hardware, and step-by-step instructions for building your storage unit.
	Tribesigns Assembly Instructions: A Shelf for Holding Things Detailed assembly instructions for the Tribesigns shelf unit, including parts list, hardware list, and step-by-step guidance for model numbers HOGA-XK00312, HOGA-XK00313, HOGA-XK00389, HOGA-XK00470, HOGA-XK00609.
	Assembly Instructions for HOGA-HL060/HOGA-HL061/HOGA-HL062 Shoe Cabinet Step-by-step assembly guide for the HOGA-HL060, HOGA-HL061, and HOGA-HL062 shoe cabinet, including parts list, hardware list, and assembly diagrams. Provides instructions in English, German, Italian, French, and Spanish.
	Assembly Instructions for Tribesigns Shoe Cabinet HOGA-F1880/F2132 Step-by-step assembly instructions for the Tribesigns Wooden Shoe Cabinet Organizer with Doors and Drawer, model HOGA-F1880/F2132. Includes parts list, hardware list, and detailed assembly steps with multilingual support.
	Tribesigns Sideboard Assembly Instructions - Model HOGA-JW0983 Detailed assembly instructions for the Tribesigns Sideboard, Model HOGA-JW0983. Includes parts list, hardware list, and step-by-step visual guides for building the furniture.
	Tribesigns Dining Table Assembly Instructions - HOGA Series Comprehensive assembly instructions for the Tribesigns Dining Table, model series HOGA-JW0669, HOGA-JW0752, HOGA-JW0879, and HOGA-JW1043. Includes detailed parts list, hardware list, step-by-step assembly guidance, and contact information for customer support.
	Tribesigns HOGA-F1333 Shoes Cabinet Assembly Instructions Assembly instructions and parts list for the Tribesigns HOGA-F1333 Shoes Cabinet. Includes detailed steps for assembly and information on returns.
	Tribesigns Boss Table Assembly Instructions Detailed assembly instructions for the Tribesigns Boss Table, including parts list, hardware list, and step-by-step guidance for assembly. This guide ensures proper construction to avoid damage and achieve optimal results.