JLab Fit Sport Wireless Earbuds: User Manual & Setup Guide

Customer Guarantees & Support

Your Satisfaction is Guaranteed: You may exchange or return merchandise within 30 days of the purchase date. Learn more at jlabaudio.com/guarantee.

Your Warranty: You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us: Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact.

First Time Setup: Bluetooth Pairing

1. Turn on the Bluetooth in your device settings.

   [Image: Smartphone screen showing Bluetooth settings with Bluetooth toggled ON.]

2. Press and hold the button on the earbuds for 10 seconds. Release. The light will blink red and blue to indicate pairing mode.

   [Image: Earbuds with a button highlighted, showing red and blue blinking lights.]

3. Select "JLab BT" in your device settings to connect. The light will slow blink blue when Bluetooth is paired.

   [Image: Smartphone screen showing Bluetooth settings with "JLab BT" selected and a slow blue blinking light indicator.]

Recurring Use

Once JLab Fit Sport has initially paired to your device, the earbuds will auto-connect to your Bluetooth device when powered back ON. (Follow BUTTON FUNCTIONS instructions).

Accessories

• 7 Tip Sizes [7 tip sizes]
• Shirt Cable Clip [shirt clip]
• Micro USB Cable [micro USB cable]

Button Functions

• Volume Up: Click once.
• Track Forward: Click & hold 2+ seconds.
• Power On: Click & hold 3 seconds.
• Power Off: Click & hold 5 seconds.
• Play/Pause, Answer/Hang Up Calls: Click once.
• Activate Siri (iOS) or "OK Google" (Android): Click twice.
• Bluetooth Pairing: (Follow First Time Setup: Bluetooth Pairing).
• Volume Down: Click once.
• Track Backward: Click & hold 2+ seconds.

Equalizer Modes

Quick press both buttons for different EQ settings (Fit Sport will cycle 3 EQ settings):

• JLab Signature (One Beep): JLab C3™ signature sound with amplified vocals and bass.
• Balanced (Two Beeps): Even sound with no additional sound enhancements.
• Bass Boost (Three Beeps): Amplified bass and sub-bass.

Voice Prompts

• "HELLO": Power is ON.
• "READY TO PAIR": JLab BT earbuds are ready to connect to your Bluetooth device.
• "YOU'RE CONNECTED": JLab BT earbuds are connected to your Bluetooth device and ready for use.
• "GOODBYE": Power turning OFF.

Charging

1. Open USB door and connect the cable to a computer or USB power source to charge. Make sure the charging source is rated at 5V or less.

   [Image: USB cable connecting to earbuds and a computer/power source.]

2. The light will turn solid red when charging and turn blue when fully charged.

   [Image: Earbuds showing charging status: solid red light for charging, solid blue light for fully charged.]

Fitting

1. Shape Memory Wire to your preference.

   [Image: Earbud with memory wire being shaped.]

2. Start from the back and rotate around the ear.

   [Image: Earbud being fitted around the ear.]

3. Secure cable in front, back, and bottom.

   [Image: Earbuds fitted securely in the ear.]

Cable Clip Use

1. Attach the cable clip near the center of the cable.

   [Image: Cable clip being attached to the earbud cable.]

2. Clip in the back or front position of shirt.

   [Image: Cable clip attached to a shirt collar, showing front and back positions.]

Connection Troubleshooting

I Do Not See JLab BT in My Device

1. Turn Bluetooth off and then back on in device settings.

   [Image: Smartphone screen showing Bluetooth settings with Bluetooth toggled OFF and then ON.]

2. If you still do not see JLab BT, repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.

JLab BT Does Not Reconnect to My Device After Powering On

1. In device settings, forget the JLab BT.

   [Image: Smartphone screen showing Bluetooth settings with "JLab BT" selected and an option to "Forget Device".]

2. Turn Bluetooth off then back on in device settings.

   [Image: Smartphone screen showing Bluetooth settings with Bluetooth toggled OFF and then ON.]

3. Repeat FIRST TIME SETUP: BLUETOOTH PAIRING directions.

Bluetooth is Connecting to an Unwanted Device

Note: The JLab BT can remember up to 8 devices. It will try to auto-connect to the last device used.

1. If you have more than one device that was connected to JLab BT, turn OFF Bluetooth on unwanted devices and turn ON Bluetooth on the chosen device.

   [Image: Smartphone screen showing multiple Bluetooth devices, with one selected and others turned off.]

2. Press and hold the button for 10 seconds. Release. The light will blink red and blue to indicate pairing mode. The light will slow blink blue when Bluetooth is paired.

   [Image: Earbuds with a button highlighted, showing red and blue blinking lights, then slow blue blinking lights.]

Warning

Make sure USB door is closed and fastened. This will protect against sweat and water damage. ⚠️

[Image: Earbuds showing the USB port door closed and fastened.]

Before charging, the Fit Sport earbuds need to be fully dry. If there is any exposure to moisture, the internal components may become damaged. It is best practice to air dry before charging.

[Image: Earbuds showing a dry state and a wet state, with a caution symbol.]

Warm-Up Your Headphones

Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Normal, everyday use can also burn-in the headphones though JLab's proprietary burn-in provides an ideal mix of sounds and frequency sweeps to achieve this.

Burn-in your audio equipment with the JLab Audio app available on the App Store and Google Play. Or access the burn-in method at: jlabaudio.com/burnin.

Cautions

• Avoid getting moisture or liquids into the tip of the earbuds or charging port.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in a safe location when not in use.

Visit JLABAUDIO.COM