Baby Trend EZ Bouncer BC20A Instruction Manual

Warranty Information

Important: Do Not Return to Store

Contact Baby Trend directly for replacement parts, service, and repair. The Baby Trend® warranty covers workmanship defects for 180 days from purchase. It is voided by misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, accident, or serial number alteration/removal. Any property damage during installation is the end user's responsibility. Customer Service can be reached at 1 (800) 328-7363, Monday-Friday, 8:00 am - 4:30 pm PST. Return Authorizations are required. Warranty valid only in North America.

Safety Warnings

⚠️ FALL Hazard

Babies have suffered skull fractures falling from bouncers. Always use the bouncer ONLY on the floor. Always use restraints and adjust them to fit snugly. NEVER lift or carry a baby while they are in the bouncer.

⚠️ SUFFOCATION Hazard

Babies have suffocated when bouncers tipped over on soft surfaces. NEVER use on a bed, sofa, cushion, or other soft surface. NEVER leave a baby unattended.

To Prevent Falls and Suffocation:

Always use restraints and adjust them to fit snugly.
NEVER use for a child who can sit up unassisted.
NEVER use on any elevated surface (e.g., tables, counters, near stairs).
A child's activity may cause the bouncer to move.
NEVER allow your bouncer to be used as a toy.
The toy bar is NOT a carry handle.
NEVER use the toy bar to lift or carry the bouncer.
NEVER move the bouncer with the child inside.
The bouncer is NOT intended for use as a carrier.
The bouncer is NOT intended for use as a sleeper or for prolonged periods of use.
NEVER place a child weighing less than 6 lbs (3 kg) or more than 25 lbs (11 kg) in the bouncer.
Regularly check the product for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.
Discontinue use if the product malfunctions or becomes damaged. Contact customer service for repair or replacement parts.

Product Parts

Before assembly, check that you have all the parts for this model.

Seat Pad: The padded seat cover.
Headrest: Provides head support for the baby (may vary in type).
Right Backrest Tube: One of the upright tubes for the backrest.
Left Backrest Tube: The other upright tube for the backrest.
Rear Base Frame Tube: The main lower support tube.
Left Base Frame Wire: Metal wire connecting the left side of the base.
Right Base Frame Wire: Metal wire connecting the right side of the base.
Footrest Wire: Metal wire for the footrest support.
Toy Bar with Plush Toys: Attaches to the bouncer for entertainment (may vary in type).
Music/Vibration Unit: Module that provides music and vibration features.

Assembly Instructions

Important Assembly Notes:

Follow these instructions carefully for safe operation. Inspect the product for damaged hardware, loose joints, missing parts, or sharp edges before assembly and each use. Adult assembly is required.

Bouncer Frame Assembly:

Step 1: Base Frame Assembly

Place the rear base frame tube on a flat surface. Lift the plastic corners. Insert the left and right base frame wires into the rear base frame tube. Push the plastic corners back down until they securely snap onto the base frame wires.

Step 2: Backrest Tube Connection

Connect the ends of the left and right backrest tubes and push them together until they click into place.

Step 3: Footrest Wire Attachment

Attach the footrest wire to the lower seat frame by inserting the ends of the upright tubes into the corresponding loops on the footrest wire.

Step 4: Upper Frame Attachment

Attach the upper frame assembly to the frame base by inserting the ends of the base frame wires into the corresponding holes on the backrest tube hub. Ensure each side snaps into place.

Step 5: Frame Assembly Complete

The bouncer frame assembly is now complete.

Battery Installation

The music/vibration unit requires three size C batteries (not included). Alkaline batteries are recommended for longer life.

Battery Precautions:

Do not mix old and new batteries.
Do not mix different battery types (alkaline, standard, rechargeable).
Keep batteries out of reach of children.
Dispose of batteries properly.
Remove batteries when the bouncer is not in use for extended periods.
Never leave exhausted batteries in the unit.
Never attempt to recharge non-rechargeable batteries.

Seat Pad Installation

Step 8: Unbuckle Straps

Unbuckle the three straps on the back of the seat pad.

Step 9: Slide Top Over Backrest

Slide the top of the seat pad over the backrest tube.

Step 10: Secure Front Edge

Pull the front edge of the seat pad over the music/vibration unit, then pull each side of the seat pad over the footrest wire until it fits snugly over the bouncer frame.

Step 11: Secure Seat Pad to Frame

Secure the seat pad to the frame by buckling the three straps on the back of the pad. Place the bouncer back in the upright position.

Toy Bar Installation

Position the toy bar above the bouncer. Insert the ends of the toy bar through the corresponding holes in the seat pad and into the corresponding holes on the frame.

Headrest Installation

Unfasten the fabric loop on the back of the headrest. Insert the loose end of the loop through the loop on the seat pad. Secure the headrest to the seat pad by fastening the fabric loop on the back of the headrest.

Seat Restraint (Harness)

Unbuckle the straps on each side of the seat restraint. Carefully place the child in the bouncer seat and buckle the straps. Adjust the straps so that the restraint fits the child snugly.

Care and Cleaning

Seat Pad and Headrest:

Remove the seat pad and headrest from the frame. Ensure all buckles are fastened. Machine wash on a gentle, delicate cycle with cold water. Do not bleach. Do not tumble dry. Do not iron. Do not dry clean.

Toy Bar and Toys:

Using a damp cloth and mild soap, wipe the toy bar and toys clean. Air dry. Do not immerse the toys or toy bar in water.

Frame:

Using a soft cloth and mild soap, wipe the frame.

Music and Vibration Unit Operation

Vibration Function:

To activate vibration, slide the vibration switch to the ON position.

Music Function:

This unit features different melodies. Slide the music switch to LOW or HIGH to activate music and select the volume.

Regulatory Information

FCC Statement:

This device complies with Part 15 of the FCC rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, try measures like reorienting the antenna, increasing separation, or connecting to a different circuit. Consult a dealer or technician for help.

Canada ICES-003 Statement:

This Class B digital apparatus complies with Industry Canada Standard ICES-003. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

	Baby Trend Trend EZ Bouncer BC20xxxA/B Instruction Manual Comprehensive instruction manual for the Baby Trend Trend EZ Bouncer (Model BC20xxxA/B), covering assembly, safety warnings, care, and operation.
	Baby Trend Trend EZ Bouncer BC20xxxS Instruction Manual Comprehensive instruction manual for the Baby Trend Trend EZ Bouncer (Model BC20xxxS), covering assembly, safety, care, and operation. Includes warranty information and regulatory compliance details.
	Baby Trend Trend EZ Bouncer Instruction Manual Comprehensive instruction manual for the Baby Trend Trend EZ Bouncer, covering safety warnings, parts identification, assembly steps, battery installation, unit operation, care and cleaning, and regulatory information.
	Baby Trend My First Rocker 2 Bouncer Instruction Manual Comprehensive instruction manual for the Baby Trend My First Rocker 2 Bouncer (Model RK02XXXA/B), covering assembly, safety guidelines, functions, and care instructions.
	Baby Trend Trend Bouncer Instruction Manual This manual provides essential safety warnings, assembly instructions, parts identification, and care guidelines for the Baby Trend Trend Bouncer. It is designed to help users safely assemble and use the product.
	Baby Trend BC36 Bouncer Instruction Manual This document provides comprehensive instructions for the Baby Trend BC36 Bouncer, including warranty information, parts identification, safety warnings, assembly steps, care and cleaning guidelines, and operational details for the music and vibration unit. It is designed for safe and proper use of the product.
	Baby Trend SW 47 Baby Swing Instruction Manual Instruction manual for the Baby Trend SW 47 baby swing, detailing safety warnings, assembly, operation, care, and warranty information. Includes multilingual safety guidelines.
	Baby Trend SW56 Swing Instruction Manual and Assembly Guide Comprehensive instruction and assembly guide for the Baby Trend SW56 swing and bouncer, including safety warnings, parts list, assembly steps, and care instructions.