Minelab X-TERRA PRO Metal Detector Quick Start Guide

Quick Start Steps

1. 1. Power On [power symbol]

   Press the power button to turn the detector on.

2. 2. Select Search Mode [search modes]

   Choose the appropriate search mode for your detection environment.

3. 3. Cancel Noise [noise cancel]

   Adjust settings to minimize unwanted noise interference for clearer signals.

4. 4. Detecting [search]

   Begin your metal detecting session.

Search Modes

The X-TERRA PRO offers versatile search modes tailored for different environments:

• Park [park icon]

  Ideal for recreational areas with high trash content, enabling more generalized detection.

  Best suited for: [general targets], [coins], [jewelry], [artifacts].

• Field [field icon]

  Excellent for detecting in historical fields to find a wide variety of target sizes.

  Best suited for: [coins], [fine jewelry], [coins and artifacts].

• Beach [beach icon]

  Designed for all saltwater conditions: dry sand, wet sand, surf, and underwater.

  Best suited for: [coins], [fine jewelry], [coins and artifacts], [wet sand], [dry sand], [underwater], [surf].

Assembly

Follow these steps to assemble your X-TERRA PRO detector:

1. Connect the lower shaft to the control box.
2. Attach the coil to the lower shaft.
3. Connect the lower shaft to the middle shaft.
4. Connect the middle shaft to the upper shaft.
5. Adjust the upper shaft length for comfortable use.
6. Ensure all connections are secure.
7. (Visual description of steps 7 & 8 showing final assembly adjustments and securing mechanisms)

Note: Refer to the full manual for detailed visual instructions.

Charging

Charge your detector using a good quality USB charger with a minimum capacity of 2A @ 5V.

Warning: Using a low-quality charger may risk detector failure. Ensure your charger meets the specified requirements.

Charging time: Approximately 5-6 hours.

Certifications: [CE], [EAC]

Controls and Display

Familiarize yourself with the detector's controls and display screen:

Display Indicators:

• Ground Balance Tracking Indicator [ground balance tracking]
• Charge Status LED [status LED]
• Battery Level/Charging Indicator [battery level]
• Discrimination Scale
• Frequency Display [frequency]
• Accuracy Indicator [accuracy]
• Search Modes Indicator [search modes]

Buttons and Functions:

• Power Button [power symbol]: Press to turn on/off.
• Sensitivity Adjustment (Less/More): Use buttons to increase or decrease sensitivity [sensitivity].
• Search Mode Button: Cycles through available search modes.
• Identify/Detect Button [identify/detect]: Used for target identification.
• Accept/Reject Button [accept/reject]: Confirms or rejects settings/targets.
• Backlight Button [backlight]: Press to toggle screen backlight.
• Flashlight Button [flashlight]: Press and hold to activate the flashlight.

Settings Menu:

Press the settings button [+] to navigate through the following settings:

• Noise Cancel [noise cancel]
• Ground Balance [ground balance]
• Volume Adjust [volume]
• Threshold [threshold]
• Target Tone [target tone]
• Recovery Speed [recovery speed]

Advanced Settings:

Press and hold the settings button [+] to access advanced settings [advanced settings].

Audio & Other Indicators:

• Vibration Indicator [vibration]
• Headphones Indicator [headphones]
• Wireless Audio Indicator [wireless audio]
• Wireless Audio Button: Press to toggle wireless audio on/off. Press and hold to pair wireless headphones.

Depth Indicator: Shows estimated target depth.

Target ID Number: Displays a numerical identification for the target.