Quick Start Guide
Follow these steps to get started quickly with your X-TERRA PRO metal detector.
-
Step 1: Turn On Detector
Press the power button [?] to turn on the detector.
-
Step 2: Select Search Mode
Choose the appropriate search mode for your environment.
Search Modes:
-
PARK
Description: Excellent for detecting targets in trashy areas in recreational zones and for general searches.
Typical scenarios: [? Park/Recreation], [?️ Trashy Sites]
-
FIELD
Description: Ideal mode for searching for targets of various sizes in historical locations.
Typical scenarios: [?️ Historical Locations], [? Various Sized Targets]
-
BEACH
Description: Suitable for all types of saltwater ground – dry sand, wet sand, for searching in the surf zone and underwater.
Typical scenarios: [?️ Dry Sand], [? Wet Sand/Surf Zone], [?♂️ Underwater]
-
-
Step 3: Ground Balance
Perform ground balance [⚖️] to optimize performance for the soil conditions. (Refer to full manual for detailed instructions).
-
Step 4: Start Searching
Begin your metal detecting adventure!
Assembly
Follow these steps to assemble your X-TERRA PRO metal detector.
- Connect the lower shaft to the search coil. [?]
- Connect the middle shaft to the lower shaft. [?]
- Attach the control box to the middle shaft. [?]
- Attach the armrest. [?]
- Insert the battery pack. [?]
- Connect the search coil cable to the shaft. [?]
- Adjust the shaft length for comfort. [?]
- Adjust the armrest position for comfort. [?]
Diagrams show numbered steps for connecting shaft sections, control box, armrest, coil, and battery.
Charging
Charging Time: 5-6 Hours.
Use only a quality USB charger with a current of at least 2A at 5V. Low-quality chargers may cause damage. Ensure your charger has the CE EAC markings.
Diagram shows the detector connected to a USB power source via its charging port. [? USB Charging]
Controls and Display
Familiarize yourself with the detector's controls and display.
| Control/Indicator | Description |
|---|---|
| Ground Balance Tracking Indicator [⚖️] | Indicates ground balance tracking status. |
| Charging LED [?/?] | Shows charging status (Red: Charging, Green: Charged). |
| Battery Charge Level [?] | Displays the remaining battery power. |
| Discrimination Scale [?] | Visual representation of target discrimination. |
| Power Switch [?] | Turns the detector on/off. |
| Sensitivity Level [⬆️/⬇️] | Adjusts the detector's sensitivity. |
| Backlight/Flashlight [?/?] | Short press: Backlight on/off. Long press: Flashlight on/off. |
| Frequency Display [⚡] | Shows the current operating frequency (e.g., 10 kHz). |
| Pinpoint Mode Indicator [?] | Indicates when Pinpoint mode is active. |
| Search Modes [⚙️] | Select between different search modes (Park, Field, Beach). |
| Sensitivity/Settings Adjustment [➕/➖] | Use plus/minus buttons to adjust sensitivity and settings. |
| Search Mode Button [▶️] | Cycles through search modes. |
| All Metal Button [♾️] | Activates All Metal mode. |
| Pinpoint/Search Mode Button [?/▶️] | Toggles between Pinpoint and Search modes. |
| Frequency Button [⚡] | Cycles through operating frequencies. |
| Backlight Indicator [?] | Illuminates when backlight is active. |
| Flashlight Indicator [?] | Illuminates when flashlight is active. |
| Vibration Indicator [?] | Indicates when vibration feedback is active. |
| Headphone Indicator [?] | Shows when headphones are connected. |
| Wireless Audio Indicator [?] | Indicates status of wireless audio transmission. Short press: toggle on/off. Long press: pair device. |
| Depth Indicator [?] | Estimates the depth of the detected target. |
| Target ID Number [?] | Displays a numerical ID for the detected target. |
| Settings Button [⚙️] | Short press: navigate settings. Long press: access additional settings. |
| Notch Filter [?] | Allows exclusion of specific target IDs. |
| Ground Balance [⚖️] | Adjusts the detector to local ground conditions. |
| Volume Control [?] | Adjusts the audio output volume. |
| Threshold Tone [?] | Sets the background hum level. |
| Target Tone [?] | Adjusts the tone for detected targets. |
| Accept/Reject [✔️/❌] | Confirms or rejects settings/options. |
| Target Speed [⏩] | Adjusts how quickly the detector responds to targets. |
| Additional Settings [⚙️+] | Long press the Settings button to access advanced options. |
| Tone Volume [??] | Adjusts the volume of target tones. |
| Tone Break [?️] | Adjusts the point at which tones change. |
| Accept/Reject [✔️/❌] | Confirms or rejects settings/options. |
| Frequency [⚡] | Displays current operating frequency. |
The display shows target ID, depth, frequency, battery status, and various mode indicators. Buttons control power, sensitivity, modes, settings, and volume.
