Product Overview
A visual representation of three linear LED vapor tight light fixtures is presented.
The Hykolity Ship Series 4FT LED Vapor Tight Light is designed for durability and performance in demanding environments.
Product Specifications
A single linear LED vapor tight fixture is shown.
Power Options: 40W, 50W, 60W (Selectable)
Color Temperature Options: 4000K (Warm White), 5000K (Neutral White), 6000K (Cool White) (Selectable)
Certifications & Ratings:
- IK08 (Impact Resistance)
- IP65 (Dust and Water Protection)
- CE
- RoHS
- ETL / cETL Listed for Wet Locations
- FC
- Suitable for Wet Locations
- 5 Year Warranty
Dimensions
Diagrams show the fixture's dimensions:
- Overall Length: 1165mm [45 7/8 inches]
- Width: 90mm [3 1/2 inches]
- Height: 84mm [3 3/8 inches]
- Internal Length: 799mm [31 1/2 inches]
- End Cap Dimension: 94mm [3 3/4 inches]
Features
- 3CCT Selectable (3 Color Temperatures)
- Power Selectable (Multiple Wattage Options)
- ETL/cETL listed for wet locations
- High efficiency: 130 lumens per watt (Frosted Lens)
- 120-277VAC universal voltage
- Operating Temperature: -40°F to 122°F
- 0-10V dimming standard
- Easy Installation
Applications
This fixture is suitable for various environments including:
- Wet areas
- Outside walkways
- Warehouses
- Storage areas
- Industrial units
- Farm buildings (Non-corrosive atmosphere)
- Garages
- Workshops
- Car parks
- Changing rooms
The fixture is resistant to impact and many chemical agents. For suitability in specific environments, specialist advice is recommended.
Visuals depict the fixture's use in:
- Supermarket lighting
- Farm building lighting
- Parking lot lighting
- Warehouse lighting
The light transmittance of the PC cover is up to 92%. The integrated design of the Lens Cover and LED Plate enhances ease of installation and use. The mount brackets provide adjustable space for easy correction during installation.
Installation
Two primary installation methods are illustrated:
- Hoisting Installation: Diagram shows the fixture suspended, with dimensions for mounting points (e.g., 24mm, 63mm, 52mm, 21mm for hoisting).
- Ceiling Installation: Diagram shows the fixture mounted directly to a ceiling, with dimensions for mounting points (e.g., 24mm, 63mm, 53mm, 26mm, 23mm for ceiling).
Color Temperature and Wattage Selection
3CCT Color Temperature
Users can choose their preferred color temperature before installation. Visuals show office interiors illuminated with:
- 6000K (Cool White)
- 5000K (Neutral White)
- 4000K (Warm White)
Wattage Selectable
This fixture offers nine distinct choices by combining three wattage levels and three color temperatures, allowing customization to fit specific site needs, saving time and money.
0-10V Dimmability
The fixture supports 0-10V dimming, allowing DC voltage to vary from 0 up to 10V to control the lowest dimming levels and scale the output of the LED light. Visuals demonstrate dimming effects in office settings.
Product Parameters
| Code | Size | Input Voltage | CCT | Power | CRI | Efficiency | Beam Angle |
|---|---|---|---|---|---|---|---|
| VP60W5K-S-4S | 1165*90*84mm | 120-277VAC | 4000K/5000K/6000K Selectable | 40/50/60W Selectable | >80 | 130Lm/W | 160° |
Installation Instructions (1/2)
READ PRIOR TO ATTEMPTING INSTALLATION
ALWAYS TURN OFF MAIN POWER BEFORE INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN
WARNINGS:
- Risk of fire or electric shock. LED Kit installation requires knowledge of luminaires electrical systems. Contact a qualified electrician if not qualified.
- Risk of fire or electric shock. Install this kit only in luminaires that have the construction features and dimensions shown in the photographs. The input rating of the retrofit kit does not exceed the input rating of the luminaire.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- This equipment is intended to be installed only by qualified personnel. Installation must comply with the current National Electric Code and all applicable state and local building codes. Final installation must be approved by a qualified electrical/building inspector. Improper installation may result in fire or electrical hazard. Ensure electrical power to the circuit has been disconnected before installing.
Diagram 1: Shows CCT Switch (6000K-5000K-4000K), Wattage Switch (40W-50W-60W), and 0-10V Dimming connections (DIM+ [Purple], DIM- [Pink]).
Diagram 2: Illustrates identifying installation location and checking for wiring/piping prior to drilling. Mounting brackets/suspension kits are fixed on the ceiling at correct spacing.
Diagram 3: Shows positioning and fixing the fixture base using pre-fixed mounting brackets/suspension kits.
Diagram 4: Presents a Wiring Diagram for power connection: Power to Single (N [Blue], GND [Yellow/Green], L [Brown]).
Steps:
- Color Temperature and Power must be selected before installation. If the optional 0-10V dimming function is used, wire according to the marks.
- Identify installation location & check for any passing wiring/piping prior drilling and installing cables. Fix the mounting brackets / suspension kits on the ceiling at correct spacing as per dimensions. (Pic.A)
- Position and fix base using the pre-fixed mounting brackets / suspension kits.
- Connect the power cable accordingly.
Installation Instructions (2/2)
Step 5: Connect the safety rope and male/female DC connectors. Check all connections are sound and properly insulated, then fit the tray back into the casing.
Step 6: Re-fit the diffuser to the base and secure all the clips.
Hardware Included
Note: Hardware not shown to actual size.
| Part | Description | Quantity |
|---|---|---|
| A | Mounting Brackets / Suspension Kits | 2 |
| B | Waterproof Connector | 1 |
| C | Hook | 2 |
| D | Washers | 4 |
| E | Plastic Anchors | 4 |
| F | Anchor Screws | 4 |
