Product Overview
The Hykolity Shield Series LED Security Light is designed to provide reliable, energy-efficient illumination for outdoor areas. Featuring a durable, weatherproof construction with an IP65 rating, this fixture is ideal for enhancing security and visibility around homes, garages, and commercial properties. Its adjustable head allows for precise light direction.
Important Safety Precautions
⚠️ WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned OFF at the circuit breaker or fuse box before beginning installation or performing any maintenance.
- Read all instructions carefully before installation.
- This fixture must be installed by a qualified electrician.
- Ensure all wiring complies with local electrical codes and the National Electrical Code (NEC).
- Do not install in locations where the temperature is below -40°C (-40°F) or above 40°C (104°F).
- Handle the fixture with care to avoid damage.
Package Contents
Verify that all parts are present before installation:
- LED Security Light Fixture
- Mounting Bracket
- Wire Connectors
- Mounting Screws
- User Manual
Installation Instructions
Follow these steps for safe and proper installation:
Step 1: Prepare for Installation
Turn off power at the main electrical panel. Locate the desired mounting location, typically a junction box or a suitable surface for mounting the bracket.
Diagram Description: A hand turning off a circuit breaker switch.
Step 2: Mount the Bracket
Secure the provided mounting bracket to the junction box or mounting surface using the supplied screws. Ensure the bracket is firmly attached and level.
Diagram Description: The metal mounting bracket is shown being screwed into a standard electrical junction box. Arrows indicate screw placement.
Step 3: Wiring Connections
Connect the fixture's wires to the corresponding house wires using the provided wire connectors:
- Connect the Ground wire (Green or Green/Yellow) from the fixture to the Ground wire of the house supply.
- Connect the Neutral wire (White) from the fixture to the Neutral wire of the house supply.
- Connect the Live wire (Black) from the fixture to the Live wire of the house supply.
Diagram Description: A close-up view showing the fixture's black wire connected to the house's black wire, white to white, and green to green, all secured with wire nuts.
Step 4: Attach the Fixture
Carefully align the fixture with the mounting bracket and secure it in place. Ensure all connections are made before fully attaching the fixture.
Diagram Description: The LED light fixture is shown being attached to the mounted bracket, likely with screws or a locking mechanism.
Step 5: Adjust Light Direction
Position the adjustable light head(s) to direct illumination where needed. Most fixtures allow for vertical and horizontal adjustment.
Diagram Description: The light fixture head is shown being manually tilted and rotated, with arrows indicating the range of motion.
Step 6: Restore Power
Once the fixture is securely mounted and all connections are made, restore power at the circuit breaker or fuse box. Test the light.
Operation
The Hykolity Shield Series LED Security Light is typically activated by a wall switch or an integrated photocell/motion sensor (if applicable). Ensure the power source is switched on for automatic operation.
Maintenance and Care
- Periodically clean the fixture lens and housing with a soft, damp cloth.
- Ensure the fixture remains free of debris that could obstruct ventilation or light output.
- Always turn off power before cleaning or maintenance.
Troubleshooting
Fixture does not light up:
- Check if power is supplied to the fixture.
- Verify all wiring connections are secure and correct.
- Ensure the circuit breaker is not tripped.
Light flickers:
- Check for loose wire connections.
- Ensure the voltage supply is stable.
Specifications
| Parameter | Specification |
|---|---|
| Brand | Hykolity |
| Series | Shield Series |
| Product Type | LED Security Light / Vapor Tight Fixture |
| Model Number | HS-SL50W (Example) |
| Voltage | 120-277V AC |
| Wattage | 50W (Example) |
| Lumens | 6500 lm (Example) |
| Color Temperature | 5000K (Daylight) |
| IP Rating | IP65 |
| Operating Temperature | -40°C to 40°C (-40°F to 104°F) |
| Housing Material | Die-cast Aluminum |
| Lens Material | Polycarbonate |
Warranty and Support
For warranty information or technical support, please visit the Hykolity website or contact their customer service department.
