Beghelli ACCIAIO SD Bluetooth® LED Luminaire
Brand: Beghelli
Model Series: ACCIAIO SD Bluetooth®
Operating Temperature: -20°C to 40°C
Power Supply: 230V - 50Hz
Certifications: UKCA, CE, IK09, IP66, ISO Certified
Website: www.beghelli.com
For further information and updates, scan the QR code on the product.
Product Dimensions and Specifications
The ACCIAIO SD Bluetooth® luminaire is available in several versions with varying dimensions and weights.
| Dimensions (mm) | Version 2X18 | Version 2X36 - 2X58 | Version 2X80 |
| A (Suspended) | 347 | 916 | 1200 |
| B (Ceiling) | 331 | 900 | 1184 |
| C | 667 | 1236 | 1563 |
| D | 101 | 101 | 101 |
| E | 108 | 108 | 108 |
| Weight (Kg) | 1.7 | 3.1 | 3.9 |
Mounting Instructions
General Mounting
Refer to the diagrams for general mounting procedures. Components are labeled with numbers for identification.
Mounting the Autodimmer Sensor (COD. 15050-15051)
This section details the installation of the optional Autodimmer Sensor (Code 15050-15051). Ensure the sensor is kept away from external light sources and is properly aligned. When integrating into a system, select the appropriate device for sensor mounting.
Sensor Specifications:
- Cable Entry: M20
- Cable Diameter: Ø 7.5 ÷ 12mm
- Wire Cross-section: 0.5 - 2.5 mm²
- Recommended Sensor Distance: 9-10mm from surface
Wiring and Control
Main Power Supply
Connect the luminaire to the mains power supply (230V - 50Hz) via L (Line) and N (Neutral) terminals.
Auxiliary Control Input
An application diagram illustrates the auxiliary control input. This input can be used for functions like 'Push to Dim' or other control signals.
- Input Type: 230VAC auxiliary control input (PUSH)
Sensor Connections
Connecting a Sensor (e.g., PUSH TO DIM):
Diagrams show connections for a PUSH TO DIM sensor and a sensor with a 230VAC output. Ensure correct wiring for each type.
- Control Input Terminal: Labeled 'PUSH' or 'SENS' depending on the sensor type.
Configuration via B.connect App
The Beghelli B.connect app (available on App Store and Google Play) is used for configuring the luminaire.
Equipment Not Included in a System:
Upon first power-up, the device offers a 7-day (168 hours) Bluetooth communication window for initial configuration without access credentials. After this period, credentials are required. If not configured within 24 days, a power cycle reactivates Bluetooth for 2 hours.
Equipment Included in a System:
Devices in a system are password-protected, and communication remains open for system owners.
Configuration Options:
The table below summarizes configuration capabilities based on system integration:
| Configuration/Command | Single Lamp without Plant | With Plant - NO Gateway / NO Central | With Plant - + Gateway (Code 15064-15074-15174) | With Plant - + Central (Code 21102) |
| Communication System | Bluetooth integrated into the device | Bluetooth integrated into the device | Bluetooth integrated into the device | Autodimmer Radio Module Code 15051 |
| Lamp Configuration | Maximum power setting only with App | Advanced features configurable from App | With App or NuBe | With App, NuBe or SD Manager |
| Control Input: | Pre-configured 'Push to Dim' function only on a single lamp | Configurable button (Push to Dim, On/Off, Scene button, Timed button...) | Configurable presence sensor (occupancy, vacancy, corridor function) | Many functions configurable via App (one per group**) |
| Autodimmer Sensor | Optional (Code 15050) on each individual lamp | Optional (Code 15050) one per group** | Optional (Code 15051) one per group** | Optional (Code 15051) one per group** |
| Security Settings | Bluetooth disabled after 2 hours | Bluetooth always active and each device protected with a password; encrypted communications | Bluetooth always active and each device protected with a password; encrypted communications | Bluetooth always active and each device protected with a password; encrypted communications |
| Remote Control via Internet | N/A | App and Cloud plant | 64 lamps per gateway (one gateway per zone) | 996 lamps per central unit |
| Energy Monitoring / Diagnostics | Single lamp from App | OK | OK with advanced features | OK with advanced features |
| Scenarios | N/A | N/A | Local and cloud | Local and cloud |
| Number of Manageable Lamps | 64 lamps for 250 zones | N/A | 64 lamps per gateway (one gateway per zone) | 996 lamps per central unit |
| Lamp Management | Local groups of lamps with connected App | N/A | Local and cloud | Local and cloud |
Emergency Kit Mounting (Optional)
An optional emergency kit (Codes: 19367, 19371, 19398, 19399) is available for specific versions (2X36, 2X58, and 2X80). Refer to the inverter manual for wiring clarification.
Autodimmer Sensor Usage & Technical Details
Usage: Keep sensors away from external light sources and align them properly. Pay attention to device selection when mounting sensors within a system.
Radio Technical Characteristics:
- Frequency band: 2.4GHz-2.4835GHz
- RF power: <100mW e.i.r.p.
Warnings and Guarantee
General Safety:
- This device is intended solely for its designed purpose. Any other use is improper and dangerous.
- The light source contained in this luminaire must only be replaced by the manufacturer, its service agent, or a similarly qualified person.
- Contact an authorized technical service center for repairs and insist on original spare parts. Failure to comply may compromise safety.
- This product contains a light source of energy efficiency class D.
- ⚠️ Caution: Electric Shock
Conformity Declaration:
Beghelli S.p.A. declares that the radio transceiver is in conformity with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at: www.beghelli.it. The device can be used under 'free use' conditions.
Lighting, LED, security systems
Lighting, LED, security systems
