Sonance Professional Series Pendant Loudspeaker Installation Manual

Product Description

From Sonance, the company that created the architectural audio category, comes a range of professional loudspeakers that set a new benchmark in sound quality and aesthetics for commercial environments.

Introducing Sonance Professional Series

The Sonance Professional Series includes a range of In-Ceiling, Pendant, and Surface Mount speakers that deliver true full-range fidelity, extremely low distortion, wide dispersion, and a smooth power response. The range also shares consistent voicing, ensuring seamless sonic integration when used together throughout a space.

The Pendant speakers utilize a minimalistic design similar to pendant lighting to blend discretely into the environment. They take advantage of the same one-piece grille design as the In-Ceiling speakers to deliver consistent sight lines when installed in the same space. The integrated top cover hides the hanging hardware and wiring connector. Available in 4", 6.5", and 8" 2-Way models, and an 8" Woofer model, in either black or white.

Speaker Models Overview

The Sonance Professional Series Pendant line includes:

• PS-P43T: 4" 2-Way Pendant Speaker
• PS-P63T: 6.5" 2-Way Pendant Speaker
• PS-P83T: 8" 2-Way Pendant Speaker
• PS-P83WT: 8" Woofer Pendant Speaker

Box & Contents

2-Way Speakers (PS-P43T, PS-P63T, PS-P83T)

• 2 x PS-P43T, PS-P63T, or PS-P83T speakers
• 2 x Speaker Grille
• 2 x Screw-On Top Cover
• 2 x Hanging Kits, each containing:
  • 4 x Stainless Steel Cables with Snap Hooks
  • 4 x Gripple® Hangers
  • 2 x Gripple® Adjustment Tools
  • 2 x Hanging Instructions

Woofer (PS-P83WT)

• 1 x PS-P83WT speaker
• 1 x Speaker Grille
• 1 x Screw-On Top Cover
• 1 x Hanging Kit containing:
  • 2 x Stainless Steel Cables with Snap Hooks
  • 2 x Gripple® Hangers
  • 1 x Gripple® Adjustment Tool
  • 1 x Hanging Instruction

Product Features

The Sonance Professional Series Pendant speakers feature:

• Transformer Tap and Bypass Selector
• High Excursion Woofer
• Pivoting Chambered Tweeter (excludes PS-P83WT)
• Tuning Port
• One Piece Paintable Grille with Magnetic Retention
• Screw-On Top Cover
• Euroblock Connector with Loop Through
• Hanging Point
• Paintable Shell (white only)

Product Preparation

Amplifier Selection

When selecting an amplifier, consider the maximum number of speakers and the output level of each speaker. The sum of the tap settings should not exceed 80% of the amplifier's rated output. For example, for 5 speakers set at 15 watts each, the total load is 75 watts (5 x 15W = 75W). To determine the required amplifier power, divide the total load by 0.8 (e.g., 75W / 0.8 = 93.75W). A standard 100W amp would safely drive this load. To calculate usable amplifier power, multiply the rated output by 0.8 (e.g., 100W x 0.8 = 80W).

Wire Gauge – 70V/100V System

The most common wire for commercial 70V systems is 18-gauge, 2-conductor, stranded wire, jacketed without a shield. Wire runs start at the amplifier and are paralleled at each speaker. Using 18-gauge wire, a 100W load is appropriate up to 700 feet. Doubling the load halves the footage (to 350 feet), while halving the load doubles the acceptable wire length (e.g., a 50W load is safe over 1400 feet of 18-gauge). Using 16-gauge wire extends the allowable run length by approximately 35% (e.g., a 100W load can run 1100 feet on 16-gauge wire compared to 700 feet on 18-gauge).

Wire Gauge – 8 Ohm System

For Sonance Professional Series loudspeakers in an 8-ohm system, the total wire resistance should be less than 10% of the speaker impedance (nominally 8 ohms). Therefore, total wire resistance should not exceed 0.8 ohms. Excessive wire resistance negatively impacts sound quality, reducing dynamics and bass definition, and potentially attenuating high frequencies. Amplifier power is also wasted in the wire, reducing system output.

Wire Resistance vs. Cable Run Length

[Figure 1: Wire Resistance]

Speaker Placement

Sonance Professional series speakers offer smooth and predictable off-axis frequency response. The chart below shows recommended speaker spacing for distributed audio systems, based on +/- 45 degrees of coverage and listener ear heights of 62" for standing and 40" for seated.

Speaker Spacing in Feet for a Distributed Audio System

[Figure 2: Speaker Spacing]

Installation

Painting the Grilles

1. Prime the grille with a metal primer/bonder in a spray can, following the manufacturer's directions.
2. Use water-based latex paint, thinned to a 1:1 paint-to-thinner ratio and strained through a standard mesh strainer.
3. Use a small touch-up gun or cap-spray gun with a #3 tip. Set the nozzle to a medium to wide fan and the pressure regulator to 60psi. Lightly spray the front of the grille in 3 quick strokes from approximately 10 inches away. Let the paint set for a minute, then turn the grille 90° and repeat. Continue until all four sides are evenly painted.
4. While the paint is wet, inspect for excess paint under the frame or plugged perforations. Use compressed air to clear any plugged perforations. If perforations are plugged after drying, use a straight pin or sewing needle to carefully remove the paint.
5. Once the paint is thoroughly dried, replace the scrim cloth on the back of the grille and mount the grille on the speaker.

Painting the Speaker Shell

Sonance Professional Series Pendant speakers have a tough polypropylene enclosure that can be painted. Use a weather-resistant outdoor paint and a spray gun.

1. If speakers are installed, remove the grilles.
2. To protect drivers during painting, trace speaker outlines onto cardboard, cut slightly inside the lines, and fit these "paint plugs" into the speaker baffles. Avoid damaging driver components.
3. Paint the speakers according to the paint manufacturer's instructions. Remove paint plugs after the paint has thoroughly dried.

Carrying Capacity of Gripple Fasteners

Sonance Professional Series Pendant speakers are supplied with Gripple hangers and suspension hardware that exceeds required weight specifications. [See Figure 3: Gripple Fasteners Carrying Capacity]

Installing the Speakers Using Gripple Suspension Systems

CAUTION: INSTALLATION MUST BE DONE BY QUALIFIED PERSONS USING SAFE RIGGING STANDARDS. USE EQUIPMENT ONLY IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS. DO NOT ALTER OR MODIFY. DO NOT USE EQUIPMENT IF THE EQUIPMENT IS NOT FUNCTIONING CORRECTLY OR IF THE EQUIPMENT IS DEFECTIVE.

1. Thread Gripple onto cable [See Figure 4: Thread Gripple]. Pass over ceiling anchor point or through another secure anchor point of the building structure. The installer is responsible for ensuring the anchor point is secure.
2. Thread cable through the top cover of the speaker [See Figure 5: Thread Cable].
3. Pass the tail end of the cable through the other channel of the Gripple [See Figure 6: Thread Cable Again].
4. With the speaker supported, snap the main support hook hanger onto the center hole in the top bracket of the speaker. Adjust to proper height by pulling cable through either end of the Gripple [See Figure 7: Main Support].
5. Snap the secondary support safety cable hook hanger onto one of the side holes in the top bracket of the speaker. Attach this to a different ceiling support point, per Steps 1 & 2 [See Figure 8: Secondary Support].
6. After height adjustment is final, trim any unneeded extra cable tail wires with a trimmer suitable for 2mm (0.077 in) diameter stranded aircraft-type cable. Screw the top cover back on after the speaker wire is connected [See Figure 9: Screw On Cover].

How to Use Release Key to Adjust Height of Speaker

1. Ensure the weight of the load is supported [See Figure 10: Load Supported].
2. Insert the release key into the small hole at the bottom of the Gripple. Push in 1/4" to release the cable [See Figure 11: Release Cable].
3. Adjust height [See Figure 12: Adjust Height].
4. Remove the key and re-secure the load [See Figure 13: Remove Key].

Connecting Speakers

1. Connect the wires from your amplifier to the Euroblock connector [See Figure 14: Input Connector].
2. Feed speaker wire through the hole in the top of the Screw-On Top Cover [See Figure 15: Feed Speaker Wire].
3. Strip approximately .1875" (5mm) of insulation off each wire. Insert the wire into the correct square opening on the connector. Use a small flat head screwdriver to tighten the corresponding screw to secure the wire [See Figure 16: Secure the Wire].

Wire Connections:

• Pin 1: + Positive In
• Pin 2: - Negative In
• Pin 3: + Positive Out
• Pin 4: - Negative Out

14. When using multiple speakers, connect them either in parallel or in the loop-through method [See Figure 17: Parallel Connection] [See Figure 18: Loop Through Connection].

15. Screw the top cover onto the speaker [See Figure 19: Screw On Cover].

16. Determine the proper wattage setting for each speaker and set each speaker's transformer tap selector accordingly [See Figure 20: Transformer Tap Selection].

17. Fit the grilles onto the speaker [See Figure 21: Grille Installation].

Technical Specifications

PS-P43T

LOUDSPEAKER

Frequency Range (-10dB):

57Hz – 25kHz

Frequency Range (-3dB):

75Hz – 20kHz

Power Capacity:

60 Watts Continuous Program Power, 30 Watts Continuous Pink Noise

Nominal Sensitivity:

87dB

Nominal Coverage Angle:

120 degrees conical coverage

Directivity Factor (Q):

7.6

Directivity (DI):

8.1dB

Rated Maximum SPL:

105dB @ 1 meter (3.3 feet) average, 110dB peak

Rated Impedance:

8 ohms nominal, 6 ohms minimum

Transformer Taps:

70V: 30W, 15W, 7.5W and 3.8W; 100V: 30W, 15W and 7.5W

Crossover Point:

3000Hz

Overall Dimension:

6.3" Diameter x 11" Depth (160mm x 280mm)

Net Weight:

6.45 lbs (2.93kg) each

Shipping Weight:

18.92 lbs (8.58kg) pair

Unit of Measure:

Pair

Color:

Black or White

Grille:

Bezel-less magnetically retained grille

TRANSDUCERS

LF Driver:

4" (100mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver:

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

ENCLOSURE

Input Connectors:

Four pin, Euroblock with loop output connections

Safety Agency:

UL 1480, UL 2239, NFPA 70

Suspension Points:

5 Points, top mounted

Included Accessories

• Euroblock Connector x 2
• 16.4′ (5m) Stainless Steel Cable with Snap Hook x 4
• Gripple® Hanger x 4
• Gripple® Adjustment Tool x 2
• Weather Boot x 2
• Grille x 2

Optional Accessories

• Replacement Round Grille White (pair) | 40152
• Replacement Round Grille Black (pair) | 40155
• Replacement Hanging Hardware Kit | 40176

PS-P63T

LOUDSPEAKER

Frequency Range (-10dB):

49Hz – 25kHz

Frequency Range (-3dB):

65Hz – 20kHz

Power Capacity:

120 Watts Continuous Program Power, 60 Watts Continuous Pink Noise

Nominal Sensitivity:

88dB

Nominal Coverage Angle:

120 degrees conical coverage

Directivity Factor (Q):

6.5

Directivity (DI):

7.9dB

Rated Maximum SPL:

108dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance:

8 ohms nominal, 6 ohms minimum

Transformer Taps:

70V: 60W, 30W, 15W and 7.5W; 100V: 60W, 30W and 15W

Crossover Point:

2750Hz

Overall Dimension:

9.13" Diameter x 15.6" Depth (232mm x 396mm)

Net Weight:

11.63 lbs (5.28kg) each

Shipping Weight:

33.38 lbs (15.14kg) pair

Unit of Measure:

Pair

Color:

Black or White

Grille:

Bezel-less magnetically retained grille

TRANSDUCERS

LF Driver:

6.5" (165mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver:

1" (25mm) Cloth dome, Pivoting, Ferrofluid cooled

ENCLOSURE

Input Connectors:

Four pin, Euroblock with loop output connections

Safety Agency:

UL 1480, UL 2239, NFPA 70

Suspension Points:

5 Points, top mounted

Included Accessories

• Euroblock Connector x 2
• 16.4′ (5m) Stainless Steel Cable with Snap Hook x 4
• Gripple® Hanger x 4
• Gripple® Adjustment Tool x 2
• Weather Boot x 2
• Grille x 2

Optional Accessories

• Replacement Round Grille White (pair) | 40153
• Replacement Round Grille Black (pair) | 40156
• Replacement Hanging Hardware Kit | 40176

PS-P83T

LOUDSPEAKER

Frequency Range (-10dB):

41Hz – 25kHz

Frequency Range (-3dB):

55Hz – 20kHz

Power Capacity:

160 Watts Continuous Program Power, 80 Watts Continuous Pink Noise

Nominal Sensitivity:

90dB

Nominal Coverage Angle:

120 degrees conical coverage

Directivity Factor (Q):

7.6

Directivity (DI):

8.1dB

Rated Maximum SPL:

110dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance:

8 ohms nominal, 6 ohms minimum

Transformer Taps:

70V: 60W, 30W, 15W and 7.5W; 100V: 60W, 30W and 15W

Crossover Point:

2750Hz

Overall Dimension:

11.06" Diameter x 19.7" Depth (281mm x 500mm)

Net Weight:

16.26 lbs (7.38kg) each

Shipping Weight:

46.97 lbs (21.31kg) pair

Unit of Measure:

Pair

Color:

Black or White

Grille:

Bezel-less magnetically retained grille

TRANSDUCERS

LF Driver:

8" (203mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver:

1" (25mm) Cloth Dome, Pivoting, Ferrofluid cooled

ENCLOSURE

Input Connectors:

Four pin, Euroblock with loop output connections

Safety Agency:

UL 1480, UL 2239, NFPA 70

Suspension Points:

5 Points, top mounted

Included Accessories

• Euroblock Connector x 2
• 16.4′ (5m) Stainless Steel Cable with Snap Hook x 4
• Gripple® Hanger x 4
• Gripple® Adjustment Tool x 2
• Weather Boot x 2
• Grille x 2

Optional Accessories

• Replacement Round Grille White (pair) | 40154
• Replacement Round Grille Black (pair) | 40157
• Replacement Hanging Hardware Kit | 40176

PS-P83WT

LOUDSPEAKER

Frequency Range (-10dB):

32Hz – 300Hz

Frequency Range (-3dB):

50Hz – 150Hz

Power Capacity:

200 Watts Continuous Program Power, 125 Watts Continuous Pink Noise

Nominal Sensitivity:

89dB

Nominal Coverage Angle:

180 degrees conical coverage

Directivity Factor (Q):

N/A

Directivity (DI):

N/A

Rated Maximum SPL:

110dB @ 1 meter (3.3 feet) average, 116dB peak

Rated Impedance:

8 ohms nominal, 6 ohms minimum

Transformer Taps:

70V: 120W, 60W, 30W and 15W; 100V: 120W, 60W and 30W

Crossover Point:

150Hz

Overall Dimension:

11.06" Diameter x 19.7" Depth (281mm x 500mm)

Net Weight:

17.71 lbs (8.03kg) each

Shipping Weight:

22.97 lbs (10.42kg) each

Unit of Measure:

Pair

Color:

Black or White

Grille:

Bezel-less magnetically retained grille

TRANSDUCERS

LF Driver:

8" (203mm) Polypropylene Cone, Butyl Rubber Surround

HF Driver:

N/A

ENCLOSURE

Input Connectors:

Four pin, Euroblock with loop output connections

Safety Agency:

UL 1480, UL 2239, NFPA 70

Suspension Points:

5 Points, top mounted

Included Accessories

• Euroblock Connector x 1
• 16.4′ (5m) Stainless Steel Cable with Snap Hook x 2
• Gripple® Hanger x 2
• Gripple® Adjustment Tool x 1
• Weather Boot x 1
• Grille x 1

Optional Accessories

• Replacement Round Grille White (pair) | 40154
• Replacement Round Grille Black (pair) | 40157
• Replacement Hanging Hardware Kit | 40176

Certifications

Safety Agency Compliance

Sonance Professional Series Pendant loudspeakers models PS-P43T, PS-P63T, PS-P83T & PS-P83WT meet the following standards:

• UL 1480: Listed Standard For Safety For Speakers for Fire Alarm, Emergency, and Commercial and Professional Use.
• UL 2239: Standard For Safety Hardware for the Support of Conduit, Tubing, and Cable
• NFPA 70: 2002 National Electrical Code

Compliance Marks: UL LISTED, CULUS LISTED, CE, WEEE COMPLIANT.

Technical Assistance & Service

The Technical Assistance Department at Sonance is available at (949) 492-7777 to answer any questions concerning the operation and installation of your speakers between the hours of 7:00 AM and 5:00 PM Pacific time, Monday through Friday, except holidays.

In the event your unit should need repair or service, you may return the unit to your authorized dealer or use the following guidelines:

PLEASE KEEP ORIGINAL PACKAGING WHEN POSSIBLE.

1. Be prepared to state the model number and / or serial number, date of purchase, and dealer's name and address when calling.
2. Contact Sonance directly at (949) 492-7777 or at www.sonance.com. YOU MUST HAVE PRIOR AUTHORIZATION TO RETURN YOUR UNIT.
3. If you are returning the product directly to Sonance, call to obtain a return authorization number before shipping.
4. Ship the product via United Parcel Service, Federal Express, or other package delivery service. Please do not use the U.S. Postal Service.
5. Write the return authorization number on the outside of the box.
6. Ship to: Attn: Quality Assurance Department, Sonance, 991 Calle Amanecer, San Clemente, CA 92673

Warranty, Remedy, Exclusions and Limitations (U.S. Only)

Limited Warranty

Sonance warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of five (5) years from the date of original purchase as shown on the invoice. Sonance will, at its option and expense during the warranty period, either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.

This exclusive warranty gives you specific legal rights, and you may have other rights, which vary from state to state. This warranty applies exclusively to the original purchaser.

The exclusive warranty does not apply and is ineffective if:

• The invoice fails to establish that the product was purchased from an authorized Sonance dealer or distributor.
• The product was subjected to misuse, neglect, accident, or improper installation.
• The product was modified, altered, or repaired by unauthorized personnel.
• The unit was not used as described in the installation and operating instructions.

Exclusive Remedy

Sonance agrees, at its option during the five (5) year warranty period, to repair any defect in material or workmanship or to furnish an equal product in exchange without charge to the purchaser, subject to verification of the defect and proof of the date of purchase.

Exclusions

To the extent permitted by law, the warranty set forth above is in lieu of, and exclusive of, all other warranties, express or implied, and is the sole and exclusive warranty provided by Sonance. All other express and implied warranties, including the implied warranties of merchantability, implied warranty of fitness for use, and implied warranty of fitness for a particular purpose are specifically excluded.

No one is authorized to make or modify any warranties on behalf of Sonance. The warranty stated above is the sole and exclusive remedy and Sonance's performance shall constitute full and final satisfaction of all obligations, liabilities and claims with respect to the Product.

In any event, Sonance shall not be liable for consequential, incidental, economic, property, bodily injury, or personal injury damages arising from the product, any breach of this warranty or otherwise.

This warranty statement gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion of implied warranties or limitations of remedies, so the above exclusions and limitations may not apply. If your state does not allow disclaimer of implied warranties, the duration of such implied warranties is limited to the period of Sonance's express warranty.

Warranty Exclusions and Damage Limitations

Additional Limitations and Exclusions from Warranty Coverage: The warranty described above is non-transferable, applies only to the initial installation of the Product, does not include installation of any repaired or replaced Product, does not include damage to allied or associated equipment which may result for any reason from use with this Product, and does not include labor or parts caused by accident, disaster, negligence, improper installation, misuse (e.g. overdriving the amplifier or speaker, excessive heat or cold or humidity, outdoor installation), or from service or repair which has not been authorized by Sonance.

Obtaining Authorized Service

To qualify for the warranty, you must contact your authorized Sonance Dealer/Installer or call Sonance Customer Service at (949) 492-7777 within the warranty period, must obtain a return merchandise number (RMA), and must deliver the Product to Sonance shipping prepaid during the warranty period, together with the original sales receipt, or invoice or other satisfactory proof of purchase.

©2017 Sonance. All rights reserved. Sonance is a registered trademark of Dana Innovations. Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com

Sonance, 991 Calle Amanecer, San Clemente, CA 92673 USA. (949) 492-7777. www.sonance.com/professionalseries