Manuals+

Sonance Professional Series Surface Mount Installation Manual

This manual provides comprehensive instructions for the installation of Sonance Professional Series Surface Mount speakers.

Product Description

Sonance Professional Series loudspeakers are designed for commercial environments, offering superior sound quality and aesthetics. The series includes In-Ceiling, Pendant, and Surface Mount speakers with consistent voicing for seamless integration. The Surface-Mount Speakers feature the FastMount® bracket and front cable connection for efficient installation and a clean appearance. They are available in 4", 5.25", 6.5", and 8" 2-Way models, as well as an 8" Woofer, in black or white.

Box and Contents

2-Way Speakers (PS-S43T, PS-S53T, PS-S63T, PS-S83T)

Woofer (PS-S83WT)

Product Features

The speakers feature a Powder Coated Aluminum Grille, a Tuning Port, a Chambered Tweeter (excluding PS-S83WT), a High Excursion Woofer, a Transformer Tap and Bypass Selector, and a Euroblock Connector with Loop Through. The enclosure includes a Rotation Lock, a Paintable Shell (white only), a FastMount Bracket, and Cable Pass-Through.

Product Preparation

Amplifier Selection

Ensure the amplifier's total tap settings do not exceed 80% of its rated output. Calculate usable power by multiplying the rated output by 0.8.

Wire Selection

70V/100V System

Use 18-gauge, 2-conductor stranded wire. For a 100-watt load, 18-gauge wire is suitable up to 700 feet. Using 16-gauge wire extends this to approximately 1100 feet.

8 Ohm System

Total wire resistance should be less than 10% of the speaker impedance (0.8 ohms for 8-ohm speakers) to maintain sound quality.

Refer to the chart for appropriate wire gauge based on distance and resistance:

Wire Resistance in Ohms vs. Length of Cable Run
Distance in Feet 50′ 100′ 150′ 200′ 250′ 300′
20 Gauge .86 1.73 2.59 3.45 4.32 5.18
18 Gauge .65 1.30 1.94 2.59 3.24 3.89
16 Gauge .43 .85 1.28 1.71 2.14 2.56
14 Gauge .27 .54 .81 1.08 1.35 1.62
12 Gauge .17 .34 .51 .68 .85 1.02

Figure 1: Wire Resistance

Speaker Placement

Sonance Professional Series speakers offer smooth off-axis response. The FastMount system allows for versatile placement.

Wall/Ceiling Mounting

Ensure the bracket is securely mounted to a structurally sound surface capable of supporting the speaker's weight and vibration. Use four screw points with #14 to #20 diameter x 2" length screws, or M6 to M8 diameter x 50mm length screws. For drywall or plasterboard, mount into a joist or stud. For brick or concrete, use wall plugs or anchors.

Figure 2: Wall Mount & Ceiling Mount

Pole Mounting

To mount on a pole, use 2 x U-bolts and nuts to clamp around the pole and bolt through the 4 holes on the back of the FastMount bracket. Spring washers or thread lock are recommended to prevent loosening due to vibration.

Figure 3: Pole Mount

Pivoting the Speakers

  1. Unlock the slide locks by moving them towards the rear of the speaker.
  2. Rotate the speakers to the desired position.
  3. Lock the slide locks by moving them towards the front of the speaker.

Figure 4: Lock and Unlock Slide Locks to Pivot Speaker

Painting the Grilles & Speaker Shell

Sonance Surface Mount speakers have a paintable polypropylene enclosure. Use a weather-resistant outdoor paint and a spray gun for best results.

  1. Remove grilles if already installed.
  2. Protect speaker driver units by using cardboard cutouts as "paint plugs" in the speaker baffles.
  3. Paint speakers according to the paint manufacturer's instructions. Remove paint plugs once dry.
  4. Paint grilles separately with very thin paint (5:1 ratio), avoiding blockage of grille holes.

Installing the Speakers

For optimal performance, place left and right speakers at ear level, 6-10 feet apart, facing the listeners. If mounting above or below ear level, pivot speakers to direct sound.

  1. Remove speakers from mounting brackets by pulling tabs on the front panels away from each other.

    2. Figure 6: Pull Tabs Away From Each Other and Slide Speaker Off Bracket

  2. Run speaker wires from the amplifier to the speaker locations through the mounting brackets. Ensure enough wire is left for connection.
  3. Attach the mounting bracket to the surface using appropriate hardware.

    4. Figure 7: Attach Bracket

  4. For pole mounting, attach the bracket using 2.5" U-bolts.

    5. Figure 8: Attaching the Bracket to a Pole

  5. Feed speaker wires through the wire entry grommets on the speaker backs, through wire tunnels, and out the front openings. The grommet creates a water-resistant seal. Ensure sufficient slack for pivoting.

    6. Figure 9: Wire Entry Grommet

  6. Slide speakers onto brackets until locks snap into place. Pull enough wire through the front for terminal connection.

    7. Figure 10: Attach Speakers to Brackets

  7. Connect wires from the amplifier to the input connector.

    8. Figure 11: Input Connector

  8. Strip approximately .1875" (5mm) of insulation from each wire. Insert wires into the correct square openings on the connector and tighten screws with a flathead screwdriver.

    9. Figure 12: Securing the Wire

  9. Determine the correct wattage setting for each speaker and set the transformer tap selector accordingly.

    10. Figure 15: Transformer Tap Selector

  10. Fit wiring terminal covers into the speaker front panel recesses.

    11. Figure 16: Attach the Connector Cover

  11. Fit the grilles onto the speakers.

    12. Figure 17: Attach the Grille

Wiring Methods

Speakers can be connected in parallel or using the loop-through method.

Figure 13: Parallel Connection

Figure 14: Loop Thru Connection

Technical Specifications

PS-S43T

PS-S53T

PS-S63T

PS-S83T

PS-S83WT

Certifications

Sonance Professional Series loudspeakers meet the following standards:

Certifications include UL Listed, CUL Listed, CE, and WEEE symbols.

Technical Assistance and Service

For questions regarding operation and installation, contact the Sonance Technical Assistance Department at (949) 492-7777, Monday-Friday, 7:00 AM - 5:00 PM Pacific Time. Keep original packaging for potential returns.

When calling, be prepared to provide the model number, serial number, date of purchase, and dealer information.

Prior authorization is required for all returns. Ship products via United Parcel Service, Federal Express, or other package delivery service (not U.S. Postal Service). Write the return authorization number on the outside of the box and ship to:

Attn: Quality Assurance Department
Sonance
991 Calle Amanecer
San Clemente, CA 92673

Warranty, Remedy, Exclusions and Limitations (U.S. Only)

Limited Warranty

Sonance warrants this product to the original purchaser against defects in material and workmanship for five (5) years from the date of original purchase. Sonance will, at its option, repair or replace the product.

This warranty is exclusive and does not apply if:

  1. The product was not purchased from an authorized Sonance dealer or distributor.
  2. The product was subjected to misuse, neglect, accident, or improper installation.
  3. The product was modified, altered, or repaired by unauthorized personnel.
  4. The unit was not used as described in the installation and operating instructions.

Exclusive Remedy

Sonance will, at its option, repair any defect or furnish an equal product in exchange during the five (5) year warranty period, subject to verification of the defect and proof of purchase.

Exclusions

The warranty is in lieu of all other warranties, express or implied, including implied warranties of merchantability, fitness for use, and fitness for a particular purpose. Sonance shall not be liable for consequential, incidental, economic, property, bodily injury, or personal injury damages.

This warranty grants specific legal rights, and other rights may vary by state. Some states do not allow exclusion of implied warranties, so these limitations may not apply.

Warranty Exclusions and Damage Limitations

The warranty is non-transferable, applies only to the initial installation, and does not cover damage from misuse, improper installation, accident, disaster, negligence, or unauthorized service. Contact your authorized Sonance Dealer/Installer or Sonance Customer Service at (949) 492-7777 for warranty service. Obtain a return merchandise number (RMA) and ship prepaid with proof of purchase.

©2017 Sonance. All rights reserved. Sonance and FastMount are registered trademarks of Dana Innovations. Features and specifications are subject to change without notice. For the latest information, visit www.sonance.com.

Sonance
991 Calle Amanecer
San Clemente, CA 92673 USA
(949) 492-7777 • FAX: (949) 361-5151
www.sonance.com/professionalseries

PDF preview unavailable. Download the PDF instead.

Professional Series Surface Mount Manual 071145 Adobe PDF Library 15.0 Adobe InDesign CC 13.1 (Macintosh)

Related Documents

Preview Sonance PS-S43T Professional Series Surface Mount Speaker | High-Fidelity Commercial Audio
Detailed specifications, features, performance data, and dimensions for the Sonance PS-S43T Professional Series Surface Mount Speaker, designed for high-quality commercial audio installations.
Preview Sonance PS-C63RTLP Professional Series In-Ceiling Speaker
Detailed specifications, features, benefits, and performance measurements for the Sonance PS-C63RTLP Professional Series In-Ceiling Low Profile Speaker. Includes information on aesthetics, installation, applications, and associated products.
Preview Sonance Professional Series Surface Mount MKII Loudspeaker Manual
Detailed manual for Sonance Professional Series Surface Mount MKII loudspeakers. Covers installation, technical specifications, safety, and warranty for models PS-S43T, PS-S53T, PS-S63T, PS-S83T, and PS-S83WT, designed for professional AV installations.
Preview Sonance Professional Series In-Ceiling Speakers Installation Manual
Detailed installation guide for Sonance Professional Series In-Ceiling loudspeakers, including product features, technical specifications, wiring, mounting, and safety compliance for models PS-C43RT, PS-C63RT, PS-C83RT, PS-C83RWT, PS-C43RTLP, and PS-C63RTLP.
Preview Sonance Professional Series Pendant Loudspeaker Installation Manual
This installation manual provides detailed instructions for installing Sonance Professional Series Pendant loudspeakers, including product description, box contents, features, preparation steps like amplifier and wire selection, speaker placement, painting guidelines, installation procedures using Gripple suspension systems, technical specifications for PS-P43T, PS-P63T, PS-P83T, and PS-P83WT models, certifications, technical assistance, and warranty information.
Preview Sonance PS-C41RT & PS-C61RT Professional Series In-Ceiling Speaker Manual
Comprehensive installation and technical manual for Sonance PS-C41RT and PS-C61RT Professional Series In-Ceiling Speakers, covering safety, features, installation, specifications, and warranty.
Preview Sonance PS-S63T Professional Series Surface Mount Speaker | High-Fidelity Commercial Audio
Explore the Sonance PS-S63T Professional Series surface mount loudspeaker, engineered for superior sound quality and aesthetics in commercial environments. Features IPX4 rating, FastMount bracket, and versatile applications.
Preview Sonance PS-S210SUBT Surface Mount Subwoofer Instruction Manual
Comprehensive guide for installing and using the Sonance Professional Series PS-S210SUBT Surface Mount Subwoofer, including safety, product description, features, preparation, installation, wiring, technical specifications, architectural specifications, technical assistance, and warranty information.