Sonance PS-60XF 70V/100V Transformer Manual
Box Contents
- Professional Series 60 Watt 70V/100V Transformer
- Installation Manual
Description
The Sonance Professional Series PS-60XF Transformer is a line matching transformer designed to match the impedance of any 8 Ohm Sonance speaker for 70V/100V system configurations. The PS-60XF features multiple input taps to accommodate different wattage requirements. This product is ideal for projects where a Sonance 8 Ohm speaker is desired but the system utilizes other 70V/100V speakers connected to a 70V/100V amplifier. These system configurations are common in commercial applications, such as restaurants, hospitality venues, and amusement parks, as well as residential spaces requiring widespread coverage or long speaker wire runs. 70-volt systems are effective for maintaining a consistent volume level across large areas.
Installation Instructions
- Review the wiring diagram on page 2 to determine the desired wattage and wire taps for your speaker installation.
- Once the desired wattage is selected, use electrical tape or wire nuts to conceal the exposed ends of the remaining, unused wire selections labeled "To Amplifier". Do not conceal the black (-) common wire, as it will be used in addition to your selected color wire.
Note: Ensure all unused "To Amplifier" wires are covered to protect the speaker from potential damage caused by hot wires touching the transformer or other metal surfaces. - Connect the green and yellow wires labeled "To Speaker" to your 8 Ohm Sonance speaker, connecting the green wire to the negative (-) terminal and the yellow wire to the positive (+) terminal.
- Secure the PS-60XF transformer to the equipment location or speaker location using bolts or screws (not supplied) through the transformer's mounting holes.
- Connect the selected wire tap and the Common (black) wire to your 70V/100V amplifier. Connect the Common (black) wire to the negative (-) terminal and the other color wire to the positive (+) terminal.
- After all four connections are made (two to the speaker and two to the amplifier), proceed to connect the remaining speakers in the system to the amplifier and configure as you would in any typical 70V/100V system.
Technical Specifications
| Primary Voltage: | 70V |
|---|---|
| Power Rating: | 60W |
| Primary Taps (70V): | 7.5W, 15W, 30W, 60W |
| 100V Taps: | 15W, 30W, 60W, NC |
| Secondary Impedance: | 6 Ohms |
| Insertion Loss: | 1.8dB |
| Frequency Response: | 20Hz - 17kHz +/- 3dB |
| Lead Length: | 6" |
| Weight: | 1.19 lbs |
| Mounting Dimensions: | 3.52" W x 1.85" D x 2.01" H (89.4mm x 47mm x 51mm) |
| Mounting Method: | Surface mounted using built-in mounting holes (hardware not included) |
Diagrams
Dimensions
Front View
The front view shows the transformer's width of 3.52 inches (89.4mm), height of 2.01 inches (51mm), and depth of 1.85 inches (47mm). A thin wire gauge of 0.04 inches (0.9mm) is also indicated.
Side View
The side view illustrates the transformer's height of 2.01 inches (51mm) and depth of 1.85 inches (47mm). It also shows a mounting hole diameter of 0.39 inches (10mm).
Top View
The top view displays the transformer's width of 3.52 inches (89.4mm) and depth of 1.85 inches (47mm).
Bottom View
The bottom view reveals the transformer's width of 2.86 inches (72.7mm) and depth of 1.48 inches (37.5mm). It indicates mounting hole diameters of 0.61 inches (4.1mm) and a mounting hole spacing of 0.37 inches (9.3mm).
Wiring Diagram and Tap Wires
This section details the wiring connections. The diagram shows wires labeled "TO AMPLIFIER" including: 7.5W (White), 15W (Blue), 30W (Brown), 60W (Orange), and Common (Black). Wires labeled "TO SPEAKER" are: Green (connected to 0, the common/negative terminal) and Yellow (connected to 8Ω, the positive terminal).
The "70 VOLT AMPLIFIER INPUT (PRIMARY)" diagram illustrates the available taps: 70V (100V), 7.5W (15W), 15W (30W), 30W (60W), 60W (NC - No Connection), and Common. The "SPEAKER OUTPUT (SECONDARY)" shows an 8Ω connection.
Warranty Information
Limited Five (5) Year Warranty
Sonance warrants to the first end-user purchaser that this Sonance-brand product (PS-60XF), when purchased from an authorized SONANCE Dealer/Distributor, will be free from defective workmanship and materials for a period of five (5) years from the date of purchase. Sonance will, at its option and expense, repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.
Exclusions
To the extent permitted by law, this warranty is exclusive and in lieu of all other warranties, express or implied, including implied warranties of merchantability, fitness for use, and fitness for a particular purpose. No one is authorized to modify these warranties. Sonance shall not be liable for consequential, incidental, economic, property, bodily injury, or personal injury damages arising from the product or any breach of warranty.
This warranty is non-transferable, applies only to the initial installation, and does not cover damage from misuse, improper installation, accident, disaster, negligence, or unauthorized service or repair. Some states may have different warranty rights.
Obtaining Authorized Service
To qualify for warranty service, contact your authorized Sonance Dealer/Installer or call Sonance Customer Service at (949) 492-7777 within the warranty period. Obtain a return merchandise number (RMA) and deliver the Product, shipping prepaid, along with proof of purchase (sales receipt or invoice).
Company Information
©2019 Sonance. All rights reserved. Sonance is a registered trademark of Dana Innovations. Features and specifications are subject to change without notice. For the latest information, visit www.sonance.com.
Sonance
991 Calle Amanecer
San Clemente, CA 92673 USA
Phone: (949) 492-7777
Fax: (949) 361-5151
Technical Support: (949) 492-7777
Document Revision Date: 12.03.2019
