Drilling Template ALPHA
Model: F036-B-6510
Template For Mortise
This template section is for mortising the door edge for the lock body.
Overall Length: 241 mm
Hatched Area Length: 212 mm
Top Edge to Hatched Area Start: 18 mm
Top Edge to Spindle Hole Center: 23 mm
Spindle Hole Center to Bottom Hole Center: 180 mm
Spindle Hole Diameter: Ø30 mm
Bottom Hole Diameter: Ø15 mm
Backset: 60 mm
Includes a reference line for the Central Line of Door Thickness.
Visual description: A long rectangular shape with a hatched area, a circular hole (Ø30mm) above it, and another circular hole (Ø15mm) below it. Rulers are shown on the sides.
Template For Lock Panels
This section details the mortise for the lock cylinder and bolt mechanism.
Main Cutout Length: 78.5 mm
Main Cutout Width: 15 mm
Top of Cutout to Spindle Hole Center: 14.3 mm
Spindle Hole Center to Bolt Hole Center: 88 mm
Bolt Hole Center to Bottom of Panel: 101 mm
Spindle Hole Diameter: Ø30 mm
Bolt Hole Diameter: Ø15 mm
Backset: 60 mm
Visual description: An elongated oval or exclamation mark shape with a hatched area, a circular hole (Ø30mm) above it, and another circular hole (Ø15mm) below it. Rulers are shown on the sides.
Template For Strike Plate
Note: The template for strike plate is for wooden doors. Please bore hole according to the actual situation if using a steel door.
Overall Strike Plate Cutout Length: 46.2 mm
Strike Plate Cutout Width: 26.5 mm
Bottom Screw Hole Center to Bottom of Cutout: 30 mm
Center of Screw Holes (Vertical Distance): 72 mm
Top Screw Hole Center to Top of Cutout: 14.5 mm
Latch Opening Width: 20 mm
Latch Opening Height: 25 mm
Overall Strike Plate Width: 40.5 mm
Visual description: A shaped outline representing a strike plate, with hatched areas indicating the latch opening and screw holes. Rulers are shown on the right side.
General Markings and Instructions
The template includes rulers marked in millimeters (mm) along the edges for precise measurement.
Scissors icons ✂️ indicate areas where the template may need to be cut or folded.
An upward arrow icon ⬆️ indicates the correct orientation for use.
