Product Features
Five-Way Solution: Offers five electronic locking modes: Fingerprint, PIN code, Key card, Zigbee, and emergency key.
Capacity: Supports up to 300 users (9 Admins, 291 normal users), with capacity for 100 PIN codes, 100 key cards, and 100 fingerprints.
Random Security Coding Function: Allows adding random numbers before and after the user's PIN code (up to 32 digits total) to prevent PIN exposure.
Auto Lock/Auto Re-lock Function: The lock automatically engages when the door is closed (unless in 'Normally Open Mode').
Privacy & Safe Handle Function: When activated, the door cannot be opened from the outside using the handle. The inside handle is also locked, preventing operation from within. Only the mechanical key can unlock the door from the outside.
Prevent Mischief and Hacking: If an incorrect PIN code, key card, or fingerprint is entered 5 times within 5 minutes, the lock will be suspended for 90 seconds before reactivating.
Low Battery Alarm: A voice alert will sound when the battery power is critically low. The lock can be opened up to 200 times after the first alarm before it becomes inoperable. Replace batteries immediately.
Warnings
- Read and understand all instructions before use.
- Warranty does not apply if damage is caused by failure to follow instructions.
- Use only alkaline batteries.
- Do not expose the product or accessories to rain or water.
- Do not expose the product to corrosive substances.
- Do not scrape the fingerprint sensor with sharp objects.
- Clean the product with a soft cloth.
- Replace batteries promptly when a low battery alert is indicated and ensure they are installed correctly.
Product Specifications
Inside Panel Components: Battery cover, Privacy switch/Safe handle switch, Inside handle.
Outside Panel Components: Touch keypad, Card reader area, Fingerprint sensor, Outside handle, Key cylinder, Emergency USB power supply.
CAUTION:
- Voice guidance is available in English and Chinese.
- The initial password is '123456'. Any fingerprint can also open the door initially.
- User PIN code: 6-12 digits (100 codes).
- Fingerprint: 100 fingerprints.
- Card: 100 cards.
Installation Guide
Door Lock Structure:
- 1. Front panel (1pc)
- 2. Spindle (1pc)
- 3. Connection bolt (2pcs)
- 4. Cylinder (1pc)
- 5. Mortise (1pc)
- 6. Mortise fixing screw (2pcs)
- 7. Cylinder fixing screw (1pc)
- 8. Back panel (1pc)
- 9. Battery cover (1pc)
- 10. Back panel screw (2pcs)
- 11. Battery cover fixing screw (1pc)
Installation Steps:
- Step 1: Install the mortise and cylinder.
- Step 2: Install the front panel. Ensure the arrow mark aligns with the door's opening direction. Connect the wire correctly.
- Step 3: Install the back panel.
- Step 4: Install the batteries.
- Step 5: Check operation and complete the installation.
Lock Settings
Factory Default Settings
| Setting | Factory Default |
|---|---|
| Password | 123456 |
| Opening Mode Setting | Normal Mode |
| Speaker | Enabled |
| Wrong Code Entry Limit | 5 times |
| Shutdown Time | 90 seconds |
| Voice Guide Language | English |
Important: The first step is to set the Admin PIN code/key card/Fingerprint.
Initialization
Press the setting key (on the back panel) for 5 seconds until the device announces "initialization succeeded".
Note: The initial password is '123456', or any fingerprint can open the door. After setting the Admin PIN/Password/Fingerprint, the initial password will be automatically deleted.
Add the First Admin
Use '#' as the Confirm Key or Menu Function Key, and '*' as the Clear Key or Back Key.
In the initial state, touch the screen, press '*' then '#' buttons, or press the 'Set' button on the back panel to add master information.
Process: Touch screen -> press '*' -> press '#' (or press 'Set') -> Voice broadcast: "Please add administrator information". Administrators can be fingerprints, passwords, or cards. -> After successful addition, voice broadcast: "administrator added successfully".
Note: Before adding administrator information, the initialized password (123456) can be used to open the door. After adding admin information, the initial password becomes invalid. A total of 9 admins can be added.
Add User & Admin
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please verify administrator information".
- Add User: Press '1' to enter the user adding screen. Voice broadcast: "Please enter the unlocking information". The system adds users sequentially. These are general users.
- Add Admin: Press '4' to add administrators. Voice broadcast: "Please enter the unlocking information". The system adds users sequentially. These are administrator users.
After successful verification, voice broadcast options include: 1. add users, 2. delete users, 3. door lock settings, 4. add administrator.
CAUTION:
- Information that already exists cannot be added. Password must be 6-12 digits.
- Administrator users are recommended to set at least one group of fingerprint/password/card and remember this information.
Delete User/Admin
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please verify administrator information".
Press '2' to enter the user deletion screen. Voice broadcast: "Please enter unlocking information".
After successful verification, voice broadcast options include: 1. add users, 2. delete users, 3. door lock settings, 4. add administrator.
Normally Open Mode
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please verify administrator information".
Press '3' for voice broadcast options: 1. function setting, 2. volume control, 3. language setting, 4. time setting.
Press '1' to enter "function setting": 1. normally open mode, 2. two-step verification, 3. anti-theft alarm, 4. silent mode.
Press '1' to switch to normally open mode.
CAUTION: After enabling normally open mode, the lock will remain in this state after each unlocking. Press '#' to lock the door.
Volume Control & Silent Mode
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please verify administrator information".
Press '3' for voice broadcast options: 1. function setting, 2. volume control, 3. language setting, 4. time setting.
Press '2' for volume control to adjust the sound level.
Press '1' to enter "function setting", then press '4' to switch to silent mode.
After successful verification, voice broadcast options include: 1. add users, 2. delete users, 3. door lock settings, 4. add administrator.
Two-Step Verification Mode
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please verify administrator information".
Press '3' for voice broadcast options: 1. function setting, 2. volume control, 3. language setting, 4. time setting.
Press '1' to enter "function setting", then press '2' for two-step verification. This mode requires two general users to verify to unlock. Admins are not restricted.
Note: Two-step verification is only valid for normal users.
After successful verification, voice broadcast options include: 1. add users, 2. delete users, 3. door lock settings, 4. add administrator.
Language Setting
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please add administrator information".
Press '3' for voice broadcast options: 1. function setting, 2. volume control, 3. language setting, 4. time setting.
Press '3' to set the language: '1' for Chinese, '2' for English.
CAUTION: When restoring factory default settings, the original language remains unchanged. You need to enter the setting interface to switch the language.
Time Setting
Process: Touch screen -> press '*' -> press '#' (or press 'Set' on the back panel) -> Voice broadcast: "Please add administrator information".
Press '3' for voice broadcast options: 1. function setting, 2. volume control, 3. language setting, 4. time setting.
Press '4' to set the time according to voice guidance.
After successful verification, voice broadcast options include: 1. add users, 2. delete users, 3. door lock settings, 4. add administrator.
Prevent Mischief and Hacking Function
The keypad locks for 90 seconds if more than 5 incorrect password attempts are made within 5 minutes. The system will not respond during this period. Administrator mode can be accessed via the setting button on the back panel to remove restrictions.
Random Security Coding Function
When opening the door, enter the password as follows: XXX password XXX. You can add random digits before and after the password, then press '#' to confirm. The password must be included.
Low Battery Alarm
A warning will sound when the voltage drops below 4.8V. The lock can be opened a maximum of 200 times from the first alarm until complete power loss. Replace batteries promptly after the low voltage alarm occurs.
Privacy and Safe Handle Function
When the Privacy/Safe handle switch is activated (from the inside panel), both handles are locked. Users cannot use the handle to unlock from the inside. From the outside, only the mechanical key can be used to unlock.
