MAULsirius 825 92

This document provides information and instructions related to the MAULsirius 825 92 LED lamp and its components.

Product Overview and Components

Brand: MAUL

Manufacturer: Jakob Maul GmbH

Model: MAULsirius 825 92

Article Numbers:

• 8259209.220
• 8259209.225
• 8259209.205
• 8259209.200
• 8259209.210
• 8259209.211
• 8259209.160

Component Identification and Handling

Component A: LED Strip

Article Number: 8259209.205

Description: A linear LED strip component.

Component B: LED Strip

Article Number: 8259209.200

Description: A linear LED strip component.

Component C: LED Driver Board

Article Number: 8259209.225

Description: A driver board with markings "LS-TLED-GAN-V1.1" and "NLP-ST-002 CN1". It includes a "QC PASS" sticker.

Component D: Driver Board

Article Number: 8259209.220

Description: A driver board with markings "LS-HC-V08".

Component E: HEP GROUP LED Driver

Article Number: 8259209.210

Model: LCV70W48 UNI

Specifications:

• Supply Voltage: 100-277VAC
• Supply Current: 0.39A
• Power: 70W
• Frequency: 50/60Hz

Component F: Control Module/Driver

Article Number: 8259209.211

Description: A control module or driver board.

Replacement and Assembly Procedures

Procedure 1: Handling Driver Unit (Page 3)

This procedure shows a MAUL LED driver unit from Jakob Maul GmbH. It is rated for 200-240V, 50/60Hz, 90W, and a maximum operating temperature of 45°C. It features CE and TÜV certifications. A PH2 screwdriver ?️ is shown for use.

Procedure 2: Cable Insertion/Removal (Pages 4, 14, 22, 23, 24)

Several steps illustrate actions involving cables and connectors:

• Page 4: A cable is shown being pulled out with a red arrow →.
• Page 14: Instructions indicate "DREHEN ROTATE b)" [Rotate b)] and a directional arrow "a)".
• Page 15: Instructions include "DREHEN ROTATE b)" [Rotate b)] and "ZIEHEN PULL a)" [Pull Tab a)].
• Page 22: Instructions for power connection: "DRÜCKEN PUSH a)" [Push Button a)] and "ZIEHEN PULL b)" [Pull Tab b)].
• Page 23: A cable is guided, with a screw circled, using a PH2 screwdriver ?️.
• Page 24: A cable is shown being inserted into a housing with a red arrow →.

Procedure 3: LED Strip Replacement (Pages 5, 10)

These steps detail the replacement of LED strips:

• Page 5: Shows the lamp housing with multiple screws circled. Instructions are "DRÜCKEN PUSH a)" [Push Button a)] and "ZIEHEN PULL b)" [Pull Tab b)]. A PH2 screwdriver ?️ is required.
• Page 10: Similar to Page 5, with instructions "DRÜCKEN PUSH a)" [Push Button a)] and "ZIEHEN PULL b)" [Pull Tab b)], and a PH2 screwdriver ?️.

Procedure 4: Component Removal/Installation (Pages 6, 8, 9, 13, 16, 19, 21, 25, 28)

Various steps involve removing or installing components using screws:

• Page 6: Shows a detached LED strip and a circular component.
• Page 8: Shows the lamp housing with LEDs.
• Page 9: Shows the lamp housing with multiple screws circled, requiring a PH2 screwdriver ?️.
• Page 13: Shows a screw circled in the lamp housing, requiring a PH2 screwdriver ?️.
• Page 16: Shows a heatsink with a board attached, with screws circled. Requires a PH1 screwdriver ?️.
• Page 19: Shows a driver board with connections, with instructions "ZIEHEN PULL" [Pull Tab]. Requires a PH2 screwdriver ?️.
• Page 21: Shows the lamp housing with a power cord and switch. Requires a PH2 screwdriver ?️.
• Page 25: Shows the HEP GROUP LED Driver with instructions "DRÜCKEN PUSH a)" [Push Button a)] and "ZIEHEN PULL b)" [Pull Tab b)]. Requires a PH1 screwdriver ?️.
• Page 28: Shows a board with connections, with instructions "ZIEHEN PULL" [Pull Tab]. Requires a PH2 screwdriver ?️.

Procedure 5: Cover Folding (Page 27)

Page 27: Instruction "AUFKLAPPEN FOLD BACK" [Fold Back Cover] is shown for a board.