ASSEMBLY INSTRUCTIONS
Page 01
Overview
Page 02 shows an isometric view of the assembled bed frame, highlighting key components labeled with numbers 1 through 8.
Parts List
Page 03 & 04: Check that you've received all parts listed below.
- Part 1: Head Board (1x1) - A padded headboard structure.
- Part 2: Head legs (2x1) - Two vertical support legs for the headboard.
- Part 3: Side Board Left (3x1) - A padded side panel.
- Part 4: Side Board Right (4x1) - A padded side panel.
- Part 5: Foot Board (5x1) - A padded footboard structure.
- Part 6: Flats (6x6) - Six flat wooden slats.
- Part 7: Flats (7x4) - Four flat wooden slats.
- Part 8: Support Slats (8x1) - A central support beam.
Hardware List
Page 05: Check that you've received all hardware listed below.
| No. | Outlook | Description | QTY |
|---|---|---|---|
| A | Bolt | Bolts 5/16"x38 mm | 12 |
| B | Washer | Plain washer Ø19x1.5 mm | 18 |
| C | Washer | Spring washer Ø13x1 mm | 18 |
| D | Tool | Allen key 80x30x4 mm | 1 |
| E | Bolt | Bolts 5/16"x45 mm | 6 |
| F | Screw | Screws Ø4x30 mm | 20 |
| G | Dowel | Dowel Ø10x30 mm | 2 |
| H | Foot | Adjust Foot 1/4"x15 mm | 3 |
Assembly Steps
Page 06: STEP 1
Open the black fabric on one of the side panels (Part 2). Take out the slats (Parts 6 and 7). Insert the slats (Part 6) into the designated slots on the side panel (Part 2).
Page 07: STEP 2
Insert two dowels (G) into the pre-drilled holes on the Head Board (Part 1).
Page 07: STEP 3
Attach the Side Board Left (Part 3) and Side Board Right (Part 4) to the frame. Use bolts (E), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the side boards and into the corresponding threaded inserts in the frame. Secure with washers and tighten using the Allen key (D).
Page 08: STEP 4
Attach the Side Board Left (Part 3) and Side Board Right (Part 4) to the Head Board (Part 1). Use bolts (A), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the side boards and into the corresponding threaded inserts in the Head Board. Secure with washers and tighten using the Allen key (D).
Page 08: STEP 5
Attach the Foot Board (Part 5) to the Side Board Left (Part 3) and Side Board Right (Part 4). Use bolts (A), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the side boards and into the corresponding threaded inserts in the Foot Board. Secure with washers and tighten using the Allen key (D).
Page 09: STEP 6
Attach the Side Board Left (Part 3) and Side Board Right (Part 4) to the Head Board (Part 1). Use bolts (A), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the side boards and into the corresponding threaded inserts in the Head Board. Secure with washers and tighten using the Allen key (D).
Page 09: STEP 7
Attach the Side Board Left (Part 3) and Side Board Right (Part 4) to the Foot Board (Part 5). Use bolts (A), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the side boards and into the corresponding threaded inserts in the Foot Board. Secure with washers and tighten using the Allen key (D).
Page 10: STEP 8
Ensure all previously installed screw bolts are fully tightened. 100%
Page 10: STEP 9
Attach the Support Slats (Part 8) to the frame. Use three adjust feet (H) to secure the support slats. Insert the adjust feet into the designated holes on the support slats and screw them into the frame.
Page 11: STEP 10
Attach the remaining slats (Part 7) to the frame. Use bolts (A), plain washers (B), and spring washers (C) to secure them. Insert the bolts through the holes in the slats and into the corresponding threaded inserts in the frame. Secure with washers and tighten using the Allen key (D).
Page 11: STEP 11
Place the remaining slats (Part 6) onto the frame, resting them on the support structures. ↓
Page 12: STEP 12
Secure the slats (Part 6) to the frame using screws (F). Insert twenty screws (F) into the pre-drilled holes along the slats and into the frame. Tighten securely. 100%
Finish
Page 13: FINISH
