Assembly Instruction

Instructions de Montage

Part List

Part ID	Description	Quantity
A1	Left Arm - Padded headboard side panel	1 pc
A2	Right Arm - Padded headboard side panel	1 pc
B1	Side rails - Metal frame pieces for the sides	2 pcs
B2	Side rails - Metal frame pieces for the sides	2 pcs
C1	Backrest - Padded panel section	1 pc
C2	Backrest - Padded panel section	1 pc
D	Link plate - Metal plate for connecting frame parts	1 pc
E	Support Bar - Metal bar for supporting slats	1 pc
F	Slats - Wooden pieces for mattress support	3 pcs
F1	Slats - Wooden pieces for mattress support	2 pcs
G	Legs Support - Metal brackets for attaching legs to slats	4 pcs
H	Legs Support - Metal brackets for attaching to side rails	2 pcs
K	Drawer - Front Panels	2 pcs
L	Drawer - Back Panels	1 pc
M	Drawer-Side Panels	2 pcs
N	Drawers - Support Bottom	2 pcs
O	Panel - Wooden panel for drawer construction	2 pcs

Hardware List

Item #	Description	Quantity
1	Plastic Feet (Ø50x40) - Cylindrical feet with flat base	4 pcs
2	Wheels - Small casters	8 pcs
3	M4 x 12 mm Wood Screws	20 pcs
4	M4 x 30 mm Wood Screws	42 pcs
5	Ø1/4" x 50mm Hex-Head bolts	8 pcs
6	Ø1/4" x 35mm Hex-Head bolts	16 pcs
7	Ø1/4" x 30 mm Hex-Head bolts	8 pcs
8	Allen Key - L-shaped hex wrench	1 pc
9	Plastic Drawer Stopper	4 pcs

Assembly Tools Required (Not Included): Screwdriver, Allen Key (provided).

STEP 1

Attach wheels (1) to the bottom of the headboard side panels (A1 and A2). Two wheels per panel are attached using the provided hardware.

Diagram shows two padded panels (A1, A2) with circular wheel components (1) being attached to their bottom edges.

STEP 2

Connect the side rails (B1 and B2) to the headboard side panels (A1 and A2). Use eight Ø1/4" x 35mm Hex-Head bolts (6) and the Allen key (8). This step is repeated for both sides of the bed frame (indicated by "x2").

Diagram shows side rails (B1, B2) being bolted to the inner sides of the headboard panels (A1, A2). A magnified view shows the bolt (6) passing through holes and being tightened with the Allen key (8).

STEP 3

Attach the backrest panels (C1 and C2) and the link plate (D) to the side rails (B1 and B2). Use eight Ø1/4" x 35mm Hex-Head bolts (6) and the Allen key (8).

Diagram shows backrest panels (C1, C2) and a link plate (D) being attached to the ends of the side rails (B1, B2). A magnified view shows the bolt (6) and Allen key (8) connection.

STEP 4

Connect the assembled frame structure to the footboard side panels (A1 and A2). Use eight Ø1/4" x 30mm Hex-Head bolts (7) and the Allen key (8).

Diagram shows the main frame assembly being attached to the footboard panels (A1, A2). Magnified views highlight the connection points using bolts (7) and the Allen key (8).

STEP 5

Secure the frame by attaching the side rails (B1 and B2) to the headboard and footboard connections. Use four M4 x 12 mm Wood Screws (3) and four Plastic Drawer Stoppers (9) for each side. This step uses a screwdriver.

Diagram shows screws (3) and stoppers (9) being inserted into pre-drilled holes to reinforce the frame connections. A magnified view shows a screw (3) being driven by a screwdriver into a hole, with a stopper (9) also shown.

STEP 6

Attach the backrest panels (C1 and C2) to the side panels (A1 and A2). Use eight Ø1/4" x 50mm Hex-Head bolts (5) and the Allen key (8).

Diagram shows the backrest panels (C1, C2) being attached to the inner sides of the main bed frame panels (A1, A2). A magnified view shows the bolt (5) being tightened with the Allen key (8).

STEP 7

Assemble the central support structure for the mattress slats. Attach two support bars (E) to two slats (F1) using eight Ø1/4" x 50mm Hex-Head bolts (5) and the Allen key (8). Attach leg supports (G) to the ends of the slats. This assembly is performed twice ("x2").

Diagram shows two sets of components being assembled: slats (F1) with support bars (E) in between, and leg supports (G) attached to the ends of the slats. Bolts (5) and Allen key (8) are used.

STEP 8

Install the assembled slat structures (F1) into the main bed frame. Use eight M4 x 30 mm Wood Screws (4) and a screwdriver to secure them.

Diagram shows the main bed frame with the assembled slat structures (F1) being placed inside. A magnified view shows wood screws (4) being driven through the slats into the frame using a screwdriver.

STEP 9

Install the remaining slats (F) into the main bed frame. Use eighteen M4 x 30 mm Wood Screws (4) and a screwdriver to secure them.

Diagram shows the main bed frame with the remaining slats (F) being placed and secured. Magnified views show wood screws (4) being driven into the frame.

STEP 10.1

Assemble the drawer boxes. Attach drawer side panels (M) to drawer front panels (K) using eight M4 x 30 mm Wood Screws (4) per drawer. This is done for two drawers ("x2").

Diagram shows drawer side panels (M) being attached to drawer front panels (K) using wood screws (4) and a screwdriver. This assembly is repeated for two drawers.

STEP 10.2

Insert the drawer bottom panels (O) into the assembled drawer sides and front. Attach the drawer support bottom (N). This is done for two drawers ("x2").

Diagram shows the drawer bottom panels (O) sliding into grooves and the support bottom (N) being placed within the drawer structure. Arrows indicate insertion direction.

STEP 10.3

Attach the drawer back panels (L) to the assembled drawer sides. Use eight M4 x 30 mm Wood Screws (4) per drawer. This is done for two drawers ("x2").

Diagram shows the drawer back panels (L) being attached to the rear of the drawer assembly using wood screws (4) and a screwdriver. This is repeated for two drawers.

STEP 10.4

Attach wheels (2) to the bottom of the assembled drawers. Use sixteen M4 x 12 mm Wood Screws (3) and four Plastic Drawer Stoppers (9) in total for both drawers (8 screws and 2 stoppers per drawer). This step uses a screwdriver.

Diagram shows wheels (2) being attached to the bottom corners of the drawers. A magnified view shows screws (3) and stoppers (9) being used for attachment with a screwdriver. This is repeated for two drawers.

FINISH

The assembly is now complete. The bed frame is fully constructed with drawers installed.

Diagram shows the fully assembled bed frame with drawers extended, indicating the final product.

	Latitude Run Multifunctional Queen Bed Assembly Instructions Comprehensive assembly guide for the Latitude Run Multifunctional Queen Size Upholstered Bed, featuring reading lights, storage headboard, drawers, and trundle. Includes part lists, hardware details, and step-by-step instructions.
	Latitude Run JMBB2586 Platform Bed Installation Guide Comprehensive installation manual for the Latitude Run JMBB2586 Queen Size Platform Bed, including assembly steps, safety warnings, warranty, and returns information.
	Latitude Run HBIG1969 Full Queen Bed Assembly Instructions Comprehensive assembly guide for the Latitude Run HBIG1969 Full Queen Upholstered Platform Bed with Storage Headboard, Trundle, and Drawers. Includes detailed part lists, hardware specifications, and step-by-step instructions for a smooth setup.
	Latitude Run Queen Size Bed Frame Assembly Instructions Comprehensive assembly instructions and helpful tips for setting up your Latitude Run Queen Size Bed Frame. This guide covers unpacking, expansion, and final assembly steps.
	Assembly Instructions: Latitude Run Upholstered Platform Bed Step-by-step guide for assembling the Latitude Run Padded Backrest King Size Upholstered Platform Bed, including parts list and hardware details.
	Latitude Run Queen Bed Assembly Instructions Comprehensive assembly instructions for the Latitude Run Queen Bed, including parts identification, hardware details, and step-by-step guidance for a smooth setup.
	Dove Tufted Upholstered Bed - Queen Assembly Instructions Comprehensive assembly guide for the Dove Tufted Upholstered Bed - Queen. Includes detailed parts and hardware lists, step-by-step instructions, and care recommendations for easy setup and maintenance.
	Latitude Run Queen Platform Bed Frame Assembly Instructions Comprehensive assembly guide and important information for the Latitude Run Queen size platform bed frame (Model CMAS1134), including parts list, hardware details, step-by-step instructions, and care recommendations.