UTILITECH 18-Inch Direct-Wire LED Undercabinet Light

Preparation

Before beginning assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list. Do not assemble if any part is missing or damaged.

Estimated Assembly Time: 20 minutes

Tools Required (Not Included)

Typical tools for electrical installation include a screwdriver, wire strippers, wire connectors, and a voltage tester.

Support

For questions, problems, or missing parts, contact UTILITECH support:

Phone: 866-994-4148 (8 a.m. - 8 p.m., EST, Monday - Sunday)

Email: ascs@lowes.com

For more information, visit Lowes.com (US) or Lowes.ca (Canada) and search the item number.

Troubleshooting

Care and Maintenance

Ensure power is off before cleaning. Clean with a mild glass cleaner and a soft cloth. Apply liquid cleaner to the cloth, not directly to the fixture. Do not attempt to replace the LEDs.

Warranty

This fixture is warranted against defects in materials and workmanship for three (3) years from the original purchase date. Contact 866-994-4148 for a Return Authorization number and instructions. The manufacturer is liable for replacement of defective items.

Safety Information

General Precautions

• Read and understand the entire manual before assembly, operation, or installation.
• Ensure electricity to the wires is shut off (remove fuse or turn off circuit breaker) before working.
• This product cannot be used with a dimmer switch.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits per FCC Rules, designed for reasonable protection against harmful interference in residential installations. If interference occurs, try:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to a different circuit outlet.
• Consult the dealer or an experienced radio/TV technician.

Consult a qualified electrician to ensure correct branch circuit conductor.

Installation Overview

Package Contents:

• A: 18-Inch LED Undercabinet Light Fixture (x1)

Hardware Contents:

• AA: Screws (x2)
• BB: Wire Connectors (x1)

Installation Steps:

1. Select desired color temperature using the switch on the fixture. [Color Temperature Selector]

   Diagram Description: Shows a switch labeled with color temperature options on the fixture.

2. Prepare to mount the fixture. [Prepare Mounting]

   Diagram Description: Shows the fixture being positioned for mounting.

3. To open the fixture cover, pull the blue tab in the indicated direction. [Open Fixture Cover]

   Diagram Description: Close-up of the fixture showing a blue tab on the cover and an arrow indicating the direction to pull.

4. Secure the fixture to the mounting surface using screws (AA). [Secure Fixture]

   Diagram Description: Shows screws being driven through mounting holes in the fixture.

5. Connect fixture wires to the supply wires: Black to Black (L - live wire), White to White (N - neutral wire), and Green (GND - ground wire) to copper/bare wire. Use wire connectors (BB) as needed. [Wire Connections]

   Diagram Description: Shows the wiring connections being made inside the fixture.

6. The fixture is now mounted and wired. [Fixture Mounted]

   Diagram Description: Shows the fixture attached to the surface with wires connected.

7. Note the fixture dimensions: 12.87 inches (32.7 cm) in length and 0.23 inches (0.6 cm) in depth. [Fixture Dimensions]

   Diagram Description: Shows the fixture with measurement lines indicating length and depth.

8. Close the fixture cover. If needed, the cover can be reopened from the side with a flat-head screwdriver. [Close Fixture Cover]

   Diagram Description: Shows the fixture cover being closed.

9. Final installation complete. [Final Installation]

   Diagram Description: Shows the fully installed and functional LED undercabinet light.