TROFAST Storage System Assembly
Parts Included
- Panel Connector/Dowel (100214) 12x
- Screw (109590) 6x
- Dowel/Peg (101350) 16x
- Allen Key (100001) 1x
Assembly Steps
Preparation: Ensure you have a screwdriver [screwdriver] (not included). Handle all parts with care on a soft surface to prevent damage.
Step 1: Attach side panels to base panels using six screws (109590).
Step 2: Insert sixteen dowels (101350) into the designated holes on the panels.
Step 3: Connect the side panels to the base and top panels using the inserted dowels.
Step 4: Slide the assembled side panels into the main frame.
Step 5: Place the top panel onto the assembled structure [arrow-down].
Step 6: Secure the top panel using six screws (100214) with the provided Allen key [allen-key]. Rotate the unit [rotate-arrow] as needed to access all fastening points.
Step 7: Final check [checkmark]. Your TROFAST storage system is now assembled.