TROFAST Storage Unit Assembly Instructions
Brand: IKEA
Parts List
| Part | Description | Quantity | Part Number |
|---|---|---|---|
| Screw | Main assembly screw | 12x | (Part number not specified for this group) |
| Screw | Smaller screw | 6x | 109590 |
| Dowel | Wooden dowel | 16x | 101350 |
| Connecting Piece | Frame connector | 1x | 100001 |
| Foot | Unit foot | 4x | 153549 |
Tools Required: Screwdriver ?
General Assembly Notes: Assemble on a flat, stable surface. Ensure all parts are present before starting. Follow steps sequentially.
Assembly Steps
Step 1: Prepare Base Panels
Take two base panels. Attach two horizontal support pieces to each base panel using 6 screws (part 109590) per panel. Ensure the supports are flush with the edges.
Visual Description: Two flat rectangular base panels are shown. On each, two narrow rectangular pieces are positioned along the longer edges. Arrows indicate screws being driven into pre-drilled holes to secure these pieces.
Step 2: Assemble Side Frames
Connect the vertical side frame components using 16 wooden dowels (part 101350). Insert dowels into the corresponding holes on the frame pieces to create two side frame assemblies.
Visual Description: Several rectangular frame pieces are shown. Wooden dowels are being inserted into holes on the edges of these pieces. The process suggests creating two identical side structures.
Step 3: Attach Side Frames to Base
Attach the assembled side frames to the prepared base panels. Use 4 wooden dowels (part 101350) and screws to secure each side frame to its respective base panel. Ensure the frames are perpendicular to the base.
Visual Description: The base panels with attached supports are shown. The assembled side frames are being positioned onto the base panels. Arrows indicate dowels and screws being used to connect them.
Step 4: Insert Vertical Panels
Slide the vertical side panels into the grooves or slots provided within the assembled frame structure. Ensure they are fully seated.
Visual Description: The partially assembled unit is shown. Two vertical panels are being guided downwards into the frame structure.
Step 5: Attach Top Panel
Place the top panel onto the assembled unit. Align it with the frame and ensure it sits correctly.
Visual Description: The unit, now with vertical panels in place, is shown. A flat top panel is being lowered onto the top of the structure.
Step 6: Secure the Unit
Secure the main structure of the unit using 6 screws (part 100001). These screws are typically driven through the top and bottom panels into the side frames.
Visual Description: The assembled unit is shown. Arrows indicate screws being driven through the top panel into the side frame members. A close-up shows a screw (part 100001) being inserted with a tool.
Step 7: Final Securing
This step appears to be a confirmation or continuation of securing the unit, likely reinforcing the structure with the same type of screws (part 100001).
Visual Description: Similar to Step 6, showing screws being used to further secure the unit's construction.
Step 8: Attach Feet and Final Check
Attach the 4 feet (part 153549) to the bottom of the storage unit. Perform a final check to ensure all connections are secure and the unit is stable. The unit can now be oriented as needed.
Visual Description: The completed storage unit is shown. Arrows indicate the 4 feet being attached to the underside. A final image shows the unit being rotated, suggesting it's ready for use.
