This document provides comprehensive assembly instructions for the IKEA TROFAST storage unit. Follow these steps carefully to ensure correct assembly.
Brand: IKEA
Product Name: TROFAST
Key Components & Quantities:
- 12x Component 100214 (likely screws)
- 6x Component 109590 (likely screws)
- 16x Component 101350 (likely dowels or pins)
- 1x Component 100001 (likely an Allen key/tool)
General Assembly Guidance:
? [Person] is shown communicating with another ? [Person], holding a ? [screwdriver] with a screw symbol ✖️, indicating tools are required.
It is recommended to assemble the unit on a soft surface, such as a ?️ [rug], to prevent scratches or damage to the product or flooring.
Avoid forcing parts together ❌. If assembly proves difficult, re-check the steps or consult customer support ?.
Step 1: Prepare Base Panels
Attach side supports to the base panels.
Lay two base panels flat on your work surface. Using 6x component 109590 [screws], attach the side support pieces to the base panels. The diagram shows screws being driven into pre-drilled holes on the base panels.
Step 2: Assemble Frame Sides
Connect side panels using dowels.
Insert 16x component 101350 [dowels/pins] into the designated holes on the side panels. These dowels will help align and secure the frame components as they are joined.
Step 3: Continue Frame Construction
Join frame components.
Attach additional frame panels using 4x component 101350 [dowels/pins]. The visual shows the process of inserting dowels and then connecting these panels to the partially assembled frame.
Step 4: Insert Drawer Runners/Sides
Slide in internal components.
Carefully slide the drawer runners or internal side panels into the main frame structure. Arrows indicate the direction of insertion: ↓ [down arrow].
Step 5: Attach Top Panel
Position the top surface.
Place the top panel onto the assembled frame. An arrow indicates the correct placement direction: ↓ [down arrow].
Step 6: Secure Top Panel
Fasten the top panel with screws.
Using 6x component 100214 [screws] and the provided 1x component 100001 [Allen key], securely fasten the top panel to the frame. The diagram illustrates the tightening process.
The assembled unit is then shown being rotated or tilted, possibly to access different sides for further assembly or to check stability.
Step 7: Final Checks and Completion
Final tightening and unit orientation.
Confirm that the top panel is securely attached by re-tightening the 6x component 100214 [screws] with the 1x component 100001 [Allen key] if necessary. The diagram shows the completed frame with screws being tightened.
The unit is shown being rotated again, indicating the completion of the main frame assembly. The product name "TROFAST" is visible on the unit or documentation.
Copyright © Inter IKEA Systems B.V. 2021
