TROFAST Storage System Assembly Instructions
Product Overview
This document provides assembly instructions for the IKEA TROFAST storage system. The TROFAST system is a modular storage solution designed for organization and play.
Manufacturer: IKEA
Product Name: TROFAST
Model Reference: AA-2282496-2
Getting Started
Before assembly, ensure you have the correct tools and understand the basic assembly principles.
Required Tools:
A screwdriver is required for assembly. ?
Assembly Tips:
- Follow the diagrams carefully to ensure correct assembly. ❌ Incorrect assembly can lead to instability.
- If you encounter difficulties, refer to IKEA customer service. ❓ ? IKEA
Parts List
Identify all components before starting assembly.
Hardware:
- 12x Dowels (Part Number: 100214)
- 6x Screws (Part Number: 109590)
- 16x Dowels (Part Number: 101350)
- 1x Allen Key (Part Number: 100001)
Assembly Steps
Step 1: Prepare Side Panels
Attach the two horizontal support pieces to the two main side panels using 6 screws (109590). Ensure the screws are tightened securely. ?
Diagram Description: Two sets of side panels are shown, with horizontal supports being attached using screws.
Step 2: Assemble Drawer Supports
Connect the drawer support pieces using 16 dowels (101350). Insert the dowels into the pre-drilled holes. ⚙️
Diagram Description: Multiple small pieces are shown being joined together with dowels.
Step 3: Attach Side Connectors
Attach the side connector pieces to the assembled structure using 4 dowels. The diagram shows a specific insertion method where a dowel is pushed into a slot. ➡️
Diagram Description: The structure from Step 1 is shown with additional pieces being attached using dowels.
Step 4: Install Side Panels
Insert the two side panels into the base structure. Arrows indicate the panels should be pushed downwards into place. ↓
Diagram Description: Two vertical panels are shown being lowered into the frame.
Step 5: Attach Top Panel
Place the top panel onto the assembled frame. An arrow indicates it should be pressed down. ↓
Diagram Description: The frame is shown with the top panel being placed on it.
Step 6: Secure the Frame
Secure the assembled unit by inserting 6 screws (100214) into the designated holes. Use the provided Allen key (100001) to tighten them. ⚙️
Diagram Description: The unit from Step 5 is shown with screws being inserted from the top and secured with the Allen key.
Step 7: Final Placement and Use
The TROFAST storage unit is now assembled. Ensure all connections are secure. The unit can be placed as needed and used with TROFAST storage boxes (sold separately).
Diagram Description: The completed unit is shown, with a suggestion for its use. A final action shows rotating or positioning the unit. ?