Kinetik Wellbeing BCA1 User Manual

Body Analyser Scales

Safety Information

Safety and Usage Information

The warning signs and symbols are essential to ensuring the correct and safe use of this product, which will protect you and others from injury. Please find meanings of the warning signs and symbols, which you may encounter on the label and user manual below:

CAUTION

The Body Analyser Scales BCA1 offers you a seamless way to manage your health. Please be aware that this device is designed for adults' self-measuring and self-monitoring body fat level. Any information provided by this device is in no way meant to treat, cure or prevent any disease or illness from happening. This device should not be used by anyone who is acutely or chronically ill, suffering from a disease or taking medications that affect your water levels. The accuracy of readings for these patients has not been verified. Specific medical advice should be obtained from a physician.

Before diet and exercise, you must first find a professional medical guide. Kindly note that the use of accessories, transducers or cables other than those specified, with the exception of transducers and cables sold by the manufacturer as replacement parts for internal components, may result in increased EMISSIONS or decreased IMMUNITY of the device. Portable and mobile RF communications equipment can affect the measuring accuracy of the device. Be aware that misuse of electrical equipments can cause electric shock, burns, fire and other hazards. Please do not use the device in flammable gas environment. Warning that the analyzer should not be used adjacent to or stacked with other equipment. Manufacturer will make available on request circuit diagrams, component parts list, etc.

WARNING: No modifications of this equipment is allowed.

During using the analyzer, the patient will contact with the surface and the electrode of the analyzer. The surface and the electrode of the analyzer is type BF Applied part. The device doesn't need to be calibrated in five years lifetime. Do not touch the output of batteries when using the analyzer. The patient is an intended operator. The patient can perform all the operations in the manual, such as measurement, changing batteries.

INDICATIONS FOR USE

The Body Analyser measures weight, BMI and uses bio-electrical impedance analysis (BIA) technology to estimate body fat, total body water percentage, bone mass and muscle mass in generally healthy children (10-17 years old) and healthy adults.

WARNING

  1. Unsuitable for use during pregnancy or labour. Readings will be inaccurate and the effects of this device on the foetus are unknown.
  2. Unsuitable for use by anyone connected to a wearable or implantable electronic device/ instrument such as a pacemaker or defribulator.

Your Scale and Its Environment

To ensure your safety as well as the service life of your scale, please avoid using the scale under the following circumstances:

Avoid storage in the following locations:

Efficient Use of Your Scale

To ensure the accuracy of measurement, please follow below instructions when you start measurement.

Overview

Device Components

A diagram showing the top view of the Kinetik Wellbeing Body Analyser Scale BCA1. Key components indicated are: Set Key, Down Key, LCD Display, Up Key, Electrodes (four circular pads), Battery Compartment, and UNIT Button.

List

  1. Body Analyser Scales BCA1
  2. One CR2032 Battery (3V)
  3. User Manual

LCD Display

The digital LCD display shows various measurement results and status indicators. It includes icons representing different body composition metrics and units of measurement.

Icons and Units:

Measurement Units and Results:

Measurement Unit Description
Body Fat Analysis Result % Body Fat Percentage
Total Body Water Analysis Result % Total Body Water Percentage
Muscle Mass Analysis Result kg Muscle Mass in Kilograms
Bone Mass Analysis Result kg Bone Mass in Kilograms
Body Mass Index BMI Body Mass Index
Stature ft / cm Height in Feet/Inches or Centimeters
Age AGE User's Age
Weight kg / lb / st Weight in Kilograms, Pounds, or Stone

Initial Start-Up

General Instructions

The Kinetik Wellbeing Body Analyser applies BIA (Bio-impedance Analysis) technology. A small amount of weak current flows through the human body to detect bio-impedance and estimate BMI, body fat, total body water, muscle mass, and bone mass. The electrical current is small and may not be felt. This BIA technology is safe, non-invasive, toxic-free, and harmless. The current mentioned above is less than 0.5mA. However, please be aware that anyone with a wearable or implantable medical electronic instrument, such as a pacemaker, must avoid using this device. The intended use of this device is for healthy children 10-17 years old and healthy adults.

Insert the Batteries

Open the battery door in the back of the scale.

CAUTION

When the symbol "Lo" appears, the device will power off after about 4s. Then you shall replace with a new set of batteries. Worn batteries are hazardous waste. Do NOT dispose of them together with the household garbage. Please refer to the local ordinances and recycling instructions regarding disposal of the worn batteries and scrapped device. If you do not intend to use this unit for a prolonged period of time, it is advisable to remove the batteries before storing.

Set Up Your Profile

The Body Analyser Scales BCA1 supports multiple users (Up to 8). You may follow below instructions to assign User ID and set up your own profile, including Gender, Stature, and Age.

  1. Assigning User ID

    With batteries correctly installed, press "set" key to enter setting mode when the scale is off. Or when the LCD displays 0.0, long press and hold "set" key to enter setting mode.

    The system will request User ID selection first. As pictured below, [User ID P1 Blinking] is shown. The operator may press the function key [Up Arrow Icon] or [Down Arrow Icon] to select User ID among P1 to P8.

    Press "set" key to confirm User ID.

  2. Setting Gender

    After confirming User ID, the system will divert to Gender setting automatically.

    As pictured below, the [Male/Female Icon] blinks. The operator may press the function key [Up Arrow Icon] or [Down Arrow Icon] to select Gender (Male/Female Athlete/Male Athlete/Female).

    Press "set" key to confirm Gender.

    Athlete Mode: An athlete is considered as a person who does 10 hours or more per week of aerobic activity and has a resting heart rate of 60 beats per minute. These individuals should select Athlete Mode for the most accurate measurement results. The Body Analyser Scales are not calibrated for professional athletes or body builders.

  3. Setting Height

    After confirming Gender, the system will divert to Height setting automatically.

    As pictured below, the digits [Height 165 Blinking] blink. The user can press the function key [Up Arrow Icon] or [Down Arrow Icon] to increase or decrease the numeral.

    You may press and hold the function key [Up Arrow Icon] or [Down Arrow Icon] to quickly change the numerical.

    Press "set" key to confirm Height.

  4. Setting Age

    After confirming the Height, the system will divert to Age setting.

    As pictured below, the digits [Age 30 Blinking] blink. The user may press the function key [Up Arrow Icon] or [Down Arrow Icon] to increase or decrease the numerical.

    You may press and hold the function key [Up Arrow Icon] or [Down Arrow Icon] to quickly change the numerical.

    Press "set" key to confirm Age.

After confirming the Age, the LCD will display "[Zero Weight KG Display]", then you can start measuring.

Repeat procedure for a second user, or to change user details. Note: To update or overwrite the memorised data, follow the same procedure, making changes as required.

Initialising Your Scale

  1. Press the platform centre and remove your foot.
  2. [Zero Weight Display] will be displayed.
  3. The scale will switch off and is now ready for use. This initialisation process must be repeated if the scale is moved. At all other times step straight on the scale.

Weight Only Operation

Your Kinetik Body Analyser Scales will operate as a conventional weight-reading scale. No special programming steps are required. Once the scale is initialized, as previously described, you may simply step on the scale to measure your current weight. For only weight reading.

  1. Position the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.
  2. Step onto the scale platform and remain still while the scale computes your weight.
  3. The scale will display your weight value. [Weight 50.0kg, Stable, Ready]
  4. The scale will automatically turn off after a few seconds.

Start Measuring

First Measurement

STEP 1: Step on the platform barefooted when the LCD displays "[Zero Weight Display]".

STEP 2: Stand still and the weight data will be locked with the unit stop flashing. Keep full contact with the electrodes until the LCD stop displaying moving "o". [Weight 50.0kg, Stable, Ready]

STEP 3: The measurement results will be displayed followed by BMI, Body Fat, Total Body Water, Muscle Mass and Bone Mass. The data will be displayed twice and then turn off.

[BMI 18.4, Body Fat 10.5%, Total Body Water 66.7%, Muscle Mass 47.5kg]

[Weight 50.0kg, Bone Mass 2.5kg]

* If it fails to complete the analysis, the LCD will only display the weight data. (To find out the solutions, please refer to Troubleshooting for more details.)

Daily Measurement

With original SENSE ON patent technology, BCA1 will switch on as you step on the platform barefooted.

Stand still and keep full contact with the electrodes until the LCD stops displaying moving "o".

After the weight is locked, the system will automatically identify the possible User ID with most similar history records.

If it identifies one user, it will skip the step about user selection, then display the BMI, Body Fat, Total Body Water, Muscle Mass and Bone Mass data sequentially twice and turn off.

Manage Your Health

If it identifies two or more users, for example, P1, P2 and P3, The LCD will display these users alternately two times. You may press [Left Arrow Icon] key to choose the left User ID and press [Right Arrow Icon] key to choose the right User ID. The measuring results will then be sorted into the User ID you selected and displayed sequentially three times. If you don't choose the user, it will display the weight again and turn off.

If it fails to identify the possible User ID, the LCD will only display the weight data then shutdown. (To find out the solutions, please refer to Troubleshooting for more details.)

How to Recall Last Reading

  1. Press set
  2. Select the user you want to get memory for by pressing the [Left Arrow Icon] or [Right Arrow Icon] key
  3. Remain on the desired user, indicated by the screen flashing P1, P2 etc.
  4. Wait until the scale flashes to 0.0kg/lb/st
  5. Press the [Left Arrow Icon] or [Right Arrow Icon] key once
  6. You will see the user you have selected flash on the display
  7. Press set again
  8. The scale will now show the last recorded memory for that user

The analysis results will be displayed in the following order: Weight, BMI, Body Fat, Total Body Water, Muscle Mass and Bone Mass.

[Weight 50.0kg, BMI 18.4, Body Fat 10.5%, Total Body Water 66.7%, Muscle Mass 47.5kg, Bone Mass 2.5kg]

Troubleshooting

Error Prompts

Error Description Solution
[Dash Display] When there are no pieces of measuring results stored under a specific User ID, for example, 3, the LCD will display "----".
[Zero Weight KG Display] After displaying the analysis results, the device will divert to the weighing interface automatically (as pictured below). You may start measuring and the measuring results will be recorded under the referring User ID.
[Overload Symbol] Overload. The device will power off. Stop using this scale for measurement.
[Low Battery Indicator] Low Battery. The device will power off after three seconds. Replace CR2032 battery. Please ensure to purchase an authorised battery.

When Measuring ...

Problem Root Cause Solution
Abnormal measuring results: Too high; OR Too low; OR Huge difference between two recent measurements. Incorrect posture Please step on the platform barefooted and stand still.
The device is located on the soft ground such as a carpet OR on a rugged surface. Please place the device on a flat, hard surface.
Your feet are too dry. Wipe your feet with a damp cloth, keeping them slightly damp when starting measurement.
No display on LCD when the device powers on. Batteries not yet installed. Install the batteries. (Please refer to Insert the Batteries)
Worn batteries. Replace CR2032 battery. Please ensure to purchase an authorised battery.
CANNOT proceed to analyze BMI, body fat, total body water, muscle mass and bone mass. Step onto the platform wearing socks or shoes. Please keep barefooted during the measurement, and keep full contact with the electrodes as well.
The system cannot identify the possible User ID with most similar data. Please assign a User ID following the instruction in Set Up Your Profile.
The user fails to select the User ID from what the system found. Please assign a User ID following the instruction in Set Up Your Profile.
The device powers off. Low battery. Replace CR2032 battery. Please ensure to purchase an authorised battery.

Specifications

Product Name Body Analyser Scales
Dimension Scale: 300x300x22.2mm (Approximately)
Net Weight Approximately 1.28kg (Excluding the cells)
Display Digital LCD
Measurement Unit Kilogram / Stone / Pound
Measurement Range 150kg; 330lb; 23st; 8lb
Division 0.1kg / 0.2lb
Accuracy 50kg: ±0.2kg; 100kg: ±0.3kg; 150kg: ±0.4kg;
Working Environment Temperature: 5 °C to 40 °C Relative Humidity: ≤85% RH Atmospheric pressure: 86kPa to 106kPa
Storage Environment Temperature: -20 °C to 60 °C Relative Humidity: ≤90% RH Atmospheric pressure: 50kPa to 106kPa
Power Source 3V (One CR2032 Battery)
Turn on Method SENSE ON technology
Auto-OFF The scale will turn off after about 10 seconds if there is no operation
Accessories 1. One CR2032 battery
2. User Manual
Mode of Operation Continuous Operation
Degree of protection Type BF applied part

About the Accuracy of This Product

This product passes strict inspection before delivery and therefore its accuracy is guaranteed by the manufacturer. Please refer to the above table for the descriptions on accuracy. This product is specially designed for body fat analysis as well as weight measurement. It should NOT be used by anyone during the process of transaction for verification of goods' weight.

Maintenance

When carrying out usual maintenance, please ensure practice of the following Do's and Don'ts:

Warranty

Your product is warranted to be free of defects in materials and workmanship for one year from the original purchase date. The device was built to exacting standards and carefully inspected prior to shipment. In the event of a defect covered by this warranty there is the option to repair or replace the device. This warranty does not cover device failure due to owner misuse or negligence, or normal wear and tear. If you have questions about your device or the warranty, please contact Kinetik Wellbeing.

This warranty does not cover damages caused by misuse or abuse, including but not limited to:

Kinetik Wellbeing
Website: http://www.kinetikwellbeing.com
Customer Care email: customercare@kinetikwellbeing.com

Appendix

Health Tips - About Body Fat

Human body is made up of, amongst other things, a percentage of fat. Body fat is vital for a healthy, functioning body, protects vital organs, helps regulate body temperature, stores vitamins and helps the body sustain itself when food is scarce. However, too much body fat or indeed too little body fat will damage to your health. It is difficult to gauge how much body fat we have in our bodies simply by looking at ourselves in the mirror.

This is why it is important to measure and monitor your body fat percentage. Body fat percentage gives you a better measure of fitness than weight alone - the composition of your weight loss could mean you are losing muscle mass rather than fat - you could still have a high percentage of fat even when a scale indicates 'normal weight'.

The table as follows may be used as a guide:

The body fat ratio (Unit: %) :

Standard for Men

Rating Age 20-29 Age 30-39 Age 40-49 Age 50-59 Age 60+
low <13 <14 <16 <17 <18
Normal 13-20 14-21 16-23 17-24 18-25
Moderately High 20.1-23 21.1-24 23.1-26 24.1-27 25.1-28
High >23 >24 >26 >27 >28

Standard for Women

Rating Age 20-29 Age 30-39 Age 40-49 Age 50-59 Age 60+
low <19 <20 <21 <22 <23
Normal 19-28 20-29 21-30 22-31 23-32
Moderately High 28.1-31 29.1-32 30.1-33 31.1-34 32.1-35
High >31 >32 >33 >34 >35

Health Tips - About Body Water

Body water is the single most important component of body weight. It represents over half of your total weight and almost two thirds of your lean body mass (predominantly muscle). Water performs a number of important roles in the body:

All the cells in the body, whether in the skin, glands, muscles, brain or anywhere else, can only function properly if they have enough water. Water also plays a vital part in regulating the body's temperature balance, particularly through perspiration.

The combination of your weight and fat measurement could appear to be 'normal' but your body hydration level could be insufficient for healthy living.

The table as follows may be used as a guide:

The body water ratio (Unit: %) :

BF % RANGE OPTIMAL TBW % RANGE (Men) OPTIMAL TBW % RANGE (Women)
4 to 14% 70 to 63% 70 to 58%
15 to 21% 63 to 57% 58 to 52%
22 to 24% 57 to 55% 52 to 49%
25 and over 55 to 37% 49 to 37%

Health Tips - About Muscle Mass

According to the American College of Sports Medicine (ACSM), lean muscle mass may decrease by nearly 50 percent between the age of 20 and 90. If you do nothing with it you're losing muscle and increasing fat. It is also important to know your muscle mass % during weight reduction. At rest, the body burns approximately 110 additional calories for each kilo of muscle gained. Benefits of gaining muscle mass include:

The table as follows may be used as a guide:

The body muscle ratio (%):

Men Approximately 40% of total body weight
Women Approximately 30% of total body weight

Health Tips - About Bone Mass

Regular exercise and a balanced diet can help maintain healthy bones. Like muscle, bone is a living tissue that can respond to exercise by becoming stronger. For most people, bone mass peaks in their thirties. Then people begin to lose bone. Regular exercise can help prevent that loss.

Calcium and vitamin D, good sources of which are dairy products, green leafy vegetables and fish, contribute to healthy bones.

The bone mass readings given by this product are an estimation of the amount of bone in your body. Those with osteoporosis or low bone densities may not get accurate estimations. If you have any concern regarding your bones please consult your doctor timely.

You may refer to the following guide:

The bone range (kg) ≤ 10kg

The average bone mass percentage for both men and women is between 4 to 5%.

Health Tips - About BMI

Maintaining proper weight is essential to healthy living. Obesity has been linked to a higher risk of heart disease, diabetes and some forms of cancer. The Body Mass Index (BMI) is the most widely accepted measurement of weight according to health professionals. The Analyzer will calculate your BMI on your height and weight.

Health Tips - About Calorie

The device uses your age, height, gender setting to calculate the estimated number of calories you can consume a day to maintain your present weight. This estimation may gradually help you with a weight loss, gain or maintenance plan.

EMC Guidance

  1. MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the ACCOMPANYING DOCUMENTS.
  2. Wireless communications equipment such as wireless home network devices, mobile phones, cordless telephones and their base stations, walkie-talkies can affect this equipment and should be kept at least a distance d = 3.3 m away from the equipment. (Note. As indicated in Table 6 of IEC 60601-1-2:2007 for ME EQUIPMENT, a typical cell phone with a maximum output power of 2 W yields d = 3.3 m at an IMMUNITY LEVEL of 3 V/m)

PDF preview unavailable. Download the PDF instead.

Kinetik-BCA1 Acrobat Distiller 19.0 (Windows)

Related Documents

Preview Kinetik Wellbeing Smart Body Analyser Scale BTS200 Instruction Manual
Comprehensive instruction manual for the Kinetik Wellbeing Smart Body Analyser Scale BTS200. Learn about setup, usage, safety, troubleshooting, and specifications for accurate body composition analysis.
Preview Kinetik JPD-500G Finger Pulse Oximeter Quick Start Guide
A concise quick start guide for the Kinetik JPD-500G Finger Pulse Oximeter, detailing setup, preparation, and measurement steps. Includes information on battery installation, user preparation, and device usage.
Preview Kinetik WT2 TENS Pain Reliever PennyPad Quick Start Guide
Step-by-step instructions for setting up and using the Kinetik WT2 TENS Pain Reliever PennyPad for effective pain relief.
Preview Kinetik DT-K111D Digital Thermometer Quick Start Guide
A concise quick start guide for the Kinetik DT-K111D Digital Thermometer, detailing setup, disinfection, and usage instructions.
Preview Kinetik Wellbeing Dual-Channel TENS Pain Reliever User Manual
Comprehensive user manual for the Kinetik Wellbeing Dual-Channel TENS Pain Reliever (Model AD-2126), covering intended use, operation, maintenance, troubleshooting, and safety guidelines.
Preview Troubleshooting Blood Pressure Monitor Readings
Guidance on ensuring accurate blood pressure readings by properly fitting the cuff, positioning the arm, and resting before measurement. Includes advice on averaging multiple readings.
Preview Kinetik Wellbeing BG-710 Blood Glucose Monitoring System Quick Start Guide
A quick start guide for the Kinetik Wellbeing BG-710 Blood Glucose Monitoring System, detailing the steps for accurate blood glucose testing.
Preview Kinetik Wellbeing Carbon Reduction Plan and Net Zero Strategy
Kinetik Wellbeing's comprehensive Carbon Reduction Plan detailing their commitment to achieving Net Zero emissions by 2040/2045. Includes baseline emissions (2022), current reporting (2024), and detailed strategies for energy, transportation, supply chain, waste management, and business travel to meet sustainability goals.