Lennox VWMD018S6-5P VRF Wall Mount Indoor Unit
Submittal Data Sheet
General Information
- Compatible with R-32 VRF air, water, and mini-VRF systems.
- Features Calm Air Mode: In cooling mode, the unit disperses air through thousands of micro-holes on the front to prevent cold air drafts.
- Integral Wi-Fi capability for control and monitoring via the Samsung SmartThings app.
Construction
- Chassis: UL94 V0 rated with a galvanized steel mounting bracket.
- Accessibility: Easy access to wire, pipe, and drain connections via a bottom access panel for simple installation and service.
Refrigerant System
- Heat Exchanger: Mechanically bonded fin to copper tube.
- Refrigerant Flow: Controlled by an electronic expansion valve (EEV) at the indoor unit.
- R32 Leak Detection: Includes an R32 alarm output plug for notification or interlock of third-party equipment (requires VSTAT10P-1 accessory).
Indoor Fan
- Type: Single, antibacterial cross-flow fan.
- Fan Speeds: Three fan speeds and auto settings.
- Louvers: Automatic motorized vertical (up/down) and horizontal (left/right) swing.
Controls
- Control Wiring: 2 x 16 AWG.
- Operation: Via wired remote controller model VSTAT04P-1 (purchased separately).
- Temperature Support: Dual set temperature support when connected to supported wired controllers.
- Shutdown: Simple connection for condensate overflow detection devices or any normally closed contact for unit shutdown.
Convenience Features
- Display: 7-segment digital display on the front for temperature and unit status.
- Filter: Washable main filter accessible from the top of the unit.
- Emergency Temperature Output (ETO): Signals an external source (e.g., backup system, BMS) when the indoor unit is in error status or room temperature exceeds a configurable level.
Certifications
- ETL Listed
- AHRI Certified® Unitary Small HP (Standard 210/240)
Specifications
| Specification | Details |
|---|---|
| Indoor Unit Model Number | VWMD018S6-5P |
| Nominal Capacity (Cooling) | 18,000 Btu/h |
| Nominal Capacity (Heating) | 20,000 Btu/h |
| Voltage | 1/208-230/60 Hz |
| Operating Current (max.) (Cooling) | 0.35 A |
| Operating Current (max.) (Heating) | 0.35 A |
| MCA | 0.44 A |
| MOP | 15 A |
| Evaporator Fan Type | BLDC motor with cross-flow fan |
| Evaporator Fan Output | 27 Watts |
| Airflow (Cooling CFM) | 424 / 487 / 555 |
| Airflow (Heating CFM) | 424 / 487 / 555 |
| Refrigerant Type | R-32 |
| A2L Leak Detection | Integral |
| Pipe Connections (High side) | 1/4" |
| Pipe Connections (Low side) | 1/2" |
| Condensate Pipe | 11/16" OD |
| Dimensions (W x H x D) | 41 1/2" x 11 13/16" x 8 1/2" |
| Weight | 26.50 lbs. |
| Sound Pressure Level (Low/Med./High/Turbo) | 29/34/37/40 dB(A) |
| Safety Certifications | UL 60335-2-40 |
Accessories
| Accessory Type | Model / Description | Part Number |
|---|---|---|
| Condensate pump | Blue Diamond MaxiBlue | X87-721 |
| Blue Diamond MicroBlue w/slim fascia kit | X86-003 | |
| Wired controller | Advanced | VSTAT04P-1 |
| Touchscreen | VSTAT02P-1 | |
| Thermostat adapter | (for connection to standard 24VAC thermostats) | VSTAT09P-1 |
| Wireless controller | VSTAT01P-1 | |
| External temperature sensor | VCTRL11P-1 | |
| External contact control interface module | VSTAT10P-1 |
Dimensional Drawing
Dimensional drawings are provided in inches. Key dimensions for the VWMD018S6-5P unit include:
- Width: Approximately 32-5/16 inches
- Height: Approximately 11-3/4 inches
- Depth: Approximately 15-11/16 inches
The drawings also detail mounting bracket dimensions and pipe connection sizes.
Lennox maintains a policy of ongoing development. Specifications are subject to change without notice.
